# Quadrax (Intellijel)

Canonical page: https://eurorackref.com/intellijel/quadrax/

- id: `intellijel/quadrax`
- width: 14 HP; depth: 38 mm
- power: +12 V 106 mA, −12 V 9 mA, +5 V ? mA
- status: current
- functions: Function Generator, ADSR Envelope, Looping / Cycling Envelope, LFO, Chaotic / Complex Modulation, Gate / Trigger Utility, Tempo / Clock Sync, 1V/Oct Pitch Tracking

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TRIG 1 | trigger, gate, clock | trigger/gate input | not stated | not stated | — | 745 |
| TRIG 2 | trigger, gate, clock | trigger/gate input | not stated | not stated | — | 745 |
| TRIG 3 | trigger, gate, clock | trigger/gate input | not stated | not stated | — | 745 |
| TRIG 4 | trigger, gate, clock | trigger/gate input | not stated | not stated | — | 745 |
| CV A | cv, pitch | assignable CV input | -10 to 10 V | bipolar | — | 745 |
| CV B | cv, pitch | assignable CV input | -10 to 10 V | bipolar | — | 745 |
| CV C | cv, pitch | assignable CV input | -10 to 10 V | bipolar | — | 745 |
| CV D | cv, pitch | assignable CV input | -10 to 10 V | bipolar | — | 745 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | cv, audio | channel function output | -5 to 10 V | not stated | Channel 1 | 745 |
| OUT 2 | cv, audio | channel function output | -5 to 10 V | not stated | Channel 2 | 745 |
| OUT 3 | cv, audio | channel function output | -5 to 10 V | not stated | Channel 3 | 745 |
| OUT 4 | cv, audio | channel function output | -5 to 10 V | not stated | Channel 4 | 745 |
| I2C port 1 | — | Qx expander connection | not stated | not stated | Channel 1, Channel 2, Channel 3, Channel 4 | 745 |
| I2C port 2 | — | Qx expander connection | not stated | not stated | Channel 1, Channel 2, Channel 3, Channel 4 | 745 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| RISE 1 | knob | rise time / rate | — | Channel 1 | 745 |
| FALL 1 | knob | fall time / morph | — | Channel 1 | 745 |
| SHAPE 1 | knob | curve / waveshape | — | Channel 1 | 745 |
| LINK/CV 1 | button | channel link, CV assign | — | Channel 1, CV matrix | 745 |
| MODE/DESTINATION 1 | button | mode / CV destination | — | Channel 1, CV matrix | 745 |
| RISE 2 | knob | rise time / rate | — | Channel 2 | 745 |
| FALL 2 | knob | fall time / morph | — | Channel 2 | 745 |
| SHAPE 2 | knob | curve / waveshape | — | Channel 2 | 745 |
| LINK/CV 2 | button | channel link, CV assign | — | Channel 2, CV matrix | 745 |
| MODE/DESTINATION 2 | button | mode / CV destination | — | Channel 2, CV matrix | 745 |
| RISE 3 | knob | rise time / rate | — | Channel 3 | 745 |
| FALL 3 | knob | fall time / morph | — | Channel 3 | 745 |
| SHAPE 3 | knob | curve / waveshape | — | Channel 3 | 745 |
| LINK/CV 3 | button | channel link, CV assign | — | Channel 3, CV matrix | 745 |
| MODE/DESTINATION 3 | button | mode / CV destination | — | Channel 3, CV matrix | 745 |
| RISE 4 | knob | rise time / rate | — | Channel 4 | 745 |
| FALL 4 | knob | fall time / morph | — | Channel 4 | 745 |
| SHAPE 4 | knob | curve / waveshape | — | Channel 4 | 745 |
| LINK/CV 4 | button | channel link, CV assign | — | Channel 4, CV matrix | 745 |
| MODE/DESTINATION 4 | button | mode / CV destination | — | Channel 4, CV matrix | 745 |

## Modes

- AD (MODE/DESTINATION = unlit) [745]
- AHR (MODE/DESTINATION = red) [745]
- CYCLE (MODE/DESTINATION = green) [745]
- BURST (MODE/DESTINATION = yellow) [745]
- LFO (MODE/DESTINATION = magenta) [745]
- ALTERNATE [745]
- LFO ALTERNATE [745]
- CV Assignment mode [745]
- Utility Mode [745]
- System Mode [745]
- CVD Mode [745]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| RISE/FALL | stage time | 0.05 to 20000 ms | AD, AHR, CYCLE | 745 |
| RISE/FALL | stage time at noon | 50 ms | AD, AHR, CYCLE | 745 |
| RISE | burst pulse rate | 0.05 to 3330 Hz | BURST | 745 |
| FALL | burst length | 0.3 to 20000 ms | BURST | 745 |
| RISE | LFO rate | 0.05 to 3330 Hz | LFO, TRIG unpatched | 745 |
| RISE | clock division/multiplication | 0.015625 to 64 ratio | LFO, clock at TRIG | 745 |
| OUT | max output | 5 to 10 V | AD, AHR, CYCLE, BURST | 745 |
| OUT | LFO output range | -5 to 5 V | LFO | 745 |
| CV inputs | modulation range | -5 to 5 V | — | 745 |
| CV inputs | accepted range | -10 to 10 V | — | 745 |
| output attenuation | step | 20 % | Utility Mode | 745 |
| CV matrix | attenuation levels | 4 count | — | 745 |
| CV matrix | attenuverted levels | 8 count | — | 745 |
| CV matrix | destinations per channel | 4 count | — | 745 |
| long-press | duration | 1 s | — | 745 |
| LFO shapes | basic waveshapes | 5 count | STANDARD LFO | 745 |
| firmware version display | duration | 2 s | at power-on | 745 |
| module | width | 14 hp | — | 745 |
| module | depth | 38 mm | — | 745 |
| module | current +12V | 106 mA | — | 745 |
| module | current -12V | 9 mA | — | 745 |
| Qx expander | width | 4 hp | — | 745 |

## Behavior

- AD: when trigger received → full cycle, gate ignored (AD) [745]
- AHR: when gate high → holds maximum (AHR) [745]
- AHR: when gate goes low → release starts (AHR) [745]
- AHR: when gate shorter than rise → falls before maximum (AHR) [745]
- CYCLE: when TRIG detected → cycle resets (CYCLE) [745]
- CYCLE: when free running → no TRIG required (CYCLE) [745]
- CYCLE: when RISE plus FALL → sets frequency (CYCLE) [745]
- LFO: when TRIG unpatched → free-running (LFO) [745]
- LFO: when clock at TRIG → syncs, RISE multiplies/divides (LFO) [745]
- LFO: when RISE at noon, clocked → rate equals clock (LFO) [745]
- linked LFOs: when trigger at downstream TRIG → resets previous LFOs in chain (LFO) [745]
- linked LFO: when previous TRIG/EOR/EOF → LFO resets (LFO) [745]
- Burst Retrigger OFF: when TRIG during burst → burst must complete first (BURST) [745]
- Burst Retrigger ON: when TRIG during burst → envelope retriggers (BURST) [745]
- Burst Retrigger ON: when retrigger → phase resets at completion (BURST) [745]
- BURST SHAPE: when counterclockwise → pulse amplitudes decrease (BURST) [745]
- BURST SHAPE: when clockwise → pulse amplitudes rise (BURST) [745]
- BURST SHAPE: when noon → peak at midpoint (BURST) [745]
- LINK: when unlit → own TRIG only [745]
- LINK: when red → triggered by previous TRIG [745]
- LINK: when green → triggered at previous EOR [745]
- LINK: when yellow → triggered at previous EOF [745]
- LINK: when also own TRIG patched → triggers OR'd [745]
- Channel 1 LINK: when linked → follows Channel 4 [745]
- EOR: when BURST mode → each pulse start (BURST) [745]
- EOF: when BURST mode → end of burst (BURST) [745]
- EOR: when STANDARD LFO → half cycle (LFO) [745]
- EOF: when STANDARD LFO → full cycle (LFO) [745]
- EOR: when ALTERNATE LFO → high while falling (LFO ALTERNATE) [745]
- EOF: when ALTERNATE LFO → high while rising (LFO ALTERNATE) [745]
- CV inputs: when beyond ±5V → clipped at ±5V [745]
- LFO output: when 10V mode requested → always ±5V max (LFO) [745]
- output attenuation: when fifth press → wraps to full voltage [745]
- STANDARD curves: when SHAPE counterclockwise → logarithmic [745]
- ALTERNATE curves: when SHAPE clockwise → exponential rise, log fall [745]
- ALTERNATE curves: when SHAPE counterclockwise → log rise, exponential fall [745]
- LFV VARIANCE: when high → random around 0V (LFO ALTERNATE) [745]
- LFV VARIANCE: when low → drunken walk (LFO ALTERNATE) [745]
- module: when power removed → state retained [745]

## Sources

- [745] Quadrax Manual v1.4 (manual): https://intellijel.com/downloads/manuals/quadrax_manual_1.4_2023.04.27.pdf
- [746] Intellijel Quadrax product page (product_page): https://intellijel.com/shop/eurorack/quadrax/

Full record as JSON: https://eurorackref.com/intellijel/quadrax.json
