# Polaris (Intellijel)

Canonical page: https://eurorackref.com/intellijel/polaris/

- id: `intellijel/polaris`
- width: 10 HP; depth: 40 mm
- power: +12 V 60 mA, −12 V 56 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs, Distortion / Saturation, Chorus / Flanger / Phaser, Self-Oscillating Filter, 1V/Oct Pitch Tracking

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio | audio input | not stated | not stated | — | 820 |
| Q | cv | Q CV input | not stated | not stated | — | 820 |
| FM1 | cv, pitch | cutoff CV input | not stated | not stated | — | 820 |
| FM2 | cv | cutoff CV input | not stated | not stated | — | 820 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| LP | audio | 4-pole low pass output | not stated | not stated | filter core | 820 |
| BP | audio | band pass output | not stated | not stated | filter core | 820 |
| HP | audio | high pass output | not stated | not stated | filter core | 820 |
| MULTI | audio | configurable filter output | not stated | not stated | MULTI output, phaser, multi distortion circuit | 820 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| MODE | button | cycles MULTI filter mode | — | MULTI output, MULTI | 820 |
| TYPE | button | cycles filter type | — | MULTI output, MULTI | 820 |
| CUTOFF | knob | cutoff frequency | — | filter core | 820 |
| INPUT DRIVE | knob | input drive amount | — | input drive | 820 |
| Q | knob | resonance | — | filter core | 820 |
| Q Attenuator | knob | Q CV attenuator | — | Q | 820 |
| MULTI DISTORT | switch | MULTI distortion on/off | — | multi distortion circuit, MULTI | 820 |
| FM1 | knob | FM1 input attenuator | — | FM1, filter core | 820 |
| FM2 | knob | FM2 attenuverter | — | FM2, filter core | 820 |
| resonance balance trimmer | other | self-resonance feedback balance | — | filter core | 820 |

## Modes

- LP (MODE = LP) [820]
- BP (MODE = BP) [820]
- HP (MODE = HP) [820]
- N (MODE = N) [820]
- AP (MODE = AP) [820]
- PHASER (MODE = PHASER) [820]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| LP output | slope | 24 dB/oct | — | 820 |
| MULTI output | slope | 6 to 24 dB/oct | per TYPE A-D | 820 |
| MULTI output | filter types | 27 count | — | 820 |
| module | width | 10 hp | — | 820 |
| module | depth | 40 mm | — | 820 |
| module | current +12V | 60 mA | — | 820 |
| module | current -12V | 56 mA | — | 820 |

## Behavior

- module: when at power down → remembers mode and types [820]
- TYPE: when mode has fewer types → some types unused [820]
- INPUT DRIVE: when above 12 o'clock → clipped distortion [820]
- FM2: when knob at 12 o'clock → no effect [820]
- FM1: when knob fully clockwise → tracks 1V/octave [820]
- MULTI: when MULTI DISTORT up → distortion applied [820]
- PHASER: when combined with FM → phaser effect [820]

## Sources

- [820] Intellijel Polaris Versatile Multimode VCF / Phaser Manual (manual): https://intellijel.com/downloads/manuals/polaris_manual_2018.09.13.pdf
- [821] Intellijel Polaris product page (product_page): https://intellijel.com/shop/eurorack/polaris/

Full record as JSON: https://eurorackref.com/intellijel/polaris.json
