# Planar² (Intellijel)

Canonical page: https://eurorackref.com/intellijel/planar-2/

- id: `intellijel/planar-2`
- width: 14 HP; depth: 40 mm
- power: +12 V 85 mA, −12 V 32 mA, +5 V 0 mA
- status: current
- functions: Manual Controller, CV Recorder / Gesture Looper, VCA, Mixer, Crossfader, Stereo Panning, LFO, Function Generator, Unipolar/bipolar switch, Tempo / Clock Sync

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| A IN | audio, cv | quadrant A VCA input | not stated | unknown | — | 1151 |
| B IN | audio, cv | quadrant B VCA input | not stated | unknown | A IN | 1151 |
| C IN | audio, cv | quadrant C VCA input | not stated | unknown | B IN | 1151 |
| D IN | audio, cv | quadrant D VCA input | not stated | unknown | C IN | 1151 |
| CV 1 | cv | control voltage input 1 | not stated | unknown | 0V | 1151 |
| CV 2 | cv | control voltage input 2 | not stated | unknown | 0V | 1151 |
| TRIGGER | trigger, clock | record/playback sync trigger | not stated | unknown | — | 1151 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| A OUT | audio, cv | quadrant A VCA out | unknown | unknown | Quadrant VCAs, A IN, Joystick, CV Gesture Recorder, CV inputs | 1151 |
| B OUT | audio, cv | quadrant B VCA out | unknown | unknown | Quadrant VCAs, B IN, Joystick, CV Gesture Recorder, CV inputs | 1151 |
| C OUT | audio, cv | quadrant C VCA out | unknown | unknown | Quadrant VCAs, C IN, Joystick, CV Gesture Recorder, CV inputs | 1151 |
| D OUT | audio, cv | quadrant D VCA out | unknown | unknown | Quadrant VCAs, D IN, Joystick, CV Gesture Recorder, CV inputs | 1151 |
| MIX OUT | audio, cv | summed VCA output | unknown | unknown | Mixer, Quadrant VCAs | 1151 |
| GATE OUT | gate | joystick/manual gate out | 0 to 5 V | unipolar | Gate Generator, CV Gesture Recorder, Manual Gate, SENSE | 1151 |
| X OUT | cv | X-axis CV | -5 to 10 V | unknown | X/Y Controller, Joystick, CV Gesture Recorder, CV inputs | 1151 |
| Y OUT | cv | Y-axis CV | -5 to 10 V | unknown | X/Y Controller, Joystick, CV Gesture Recorder, CV inputs | 1151 |
| I2C connector | gate | Gx/Qx expander link | not stated | unknown | Joystick, Gx/Qx expander | 1151 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Joystick | other | vector position control | — | Joystick, Quadrant VCAs, X/Y Controller, Gate Generator, CV Gesture Recorder | 1151 |
| XY button | button | X/Y output source | — | X OUT, Y OUT, X/Y Controller | 1151 |
| ABCD button | button | A-D/MIX output source | — | A OUT, B OUT, C OUT, D OUT, MIX OUT, Quadrant VCAs | 1151 |
| X Polarity | switch | X OUT polarity | — | X OUT | 1151 |
| Y Polarity | switch | Y OUT polarity | — | Y OUT | 1151 |
| CV 1 Input attenuverter | knob | CV 1 scale/invert | — | CV 1, CV inputs | 1151 |
| CV 2 Input attenuverter | knob | CV 2 scale/invert | — | CV 2, CV inputs | 1151 |
| MODE | button | CV input mode | — | CV 1, CV 2, CV inputs | 1151 |
| SENSE | switch | motion gate enable | — | GATE OUT, Gate Generator | 1151 |
| Manual Gate | button | manual gate | — | GATE OUT, Gate Generator | 1151 |
| RECORD | button | record joystick gestures | — | CV Gesture Recorder | 1151 |
| PLAY | button | start/stop playback | — | CV Gesture Recorder | 1151 |
| LOOP | button | playback loop mode | — | CV Gesture Recorder | 1151 |

## Modes

- Cartesian (MODE = left LED) [1151]
- Polar (MODE = right LED) [1151]
- Scan (MODE = both LEDs) [1151]
- One-shot (LOOP = UNLIT) [1151]
- Loop (LOOP = LIT) [1151]
- Retrigger (LOOP = FLASHING) [1151]
- UNI [1151]
- +/- [1151]
- Calibration Mode [1151]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| X/Y OUT | unipolar range | 0 to 10 V | UNI | 1151 |
| X/Y OUT | bipolar range | -5 to 5 V | +/- | 1151 |
| A-D OUT | CV range | 0 to 10 V | inputs unpatched | 1151 |
| GATE OUT | gate level | 5 V | — | 1151 |
| CV Gesture Recorder | max recording length | 4 min | — | 1151 |
| CV 1 | scan range | 0 to 5 V | Scan mode | 1151 |
| Button state | save interval | 30 s | — | 1151 |
| Buttons | hold time | 1 s | — | 1151 |
| Self-calibration | duration | 2 to 3 s | — | 1151 |
| Module | width | 14 hp | — | 1151 |
| Module | depth | 40 mm | — | 1151 |
| Module | current +12V | 85 mA | — | 1151 |
| Module | current -12V | 32 mA | — | 1151 |

## Behavior

- B/C/D IN: when unpatched → takes left neighbour's input [1151]
- A IN: when unpatched → no signal to VCA [1151]
- A-D OUT: when inputs unpatched → 0-10V CV sources [1151]
- X/Y OUT: when XY button LIT → CV added to joystick/recording [1151]
- X/Y OUT: when XY button FLASHING → joystick only, CV ignored [1151]
- X/Y OUT: when XY button UNLIT → joystick centred, CV only [1151]
- A-D/MIX OUT: when ABCD button FLASHING → CV ignored [1151]
- Recording playback: when output button unlit/flashing → not sent to outputs [1151]
- X/Y OUT: when CV summed → limited to polarity range [1151]
- Polarity switch: when changed → also affects recorded values [1151]
- CV 1/CV 2: when unpatched → default 0V [1151]
- CV 1: when Polar, CV 2 at 0V → no effect (Polar) [1151]
- Scan mode: when no recording → no effect (Scan) [1151]
- Scan timeline: when CV 2 at 0V → linear (Scan) [1151]
- Scan timeline: when CV 2 positive → logarithmic (Scan) [1151]
- Scan timeline: when CV 2 negative → exponential (Scan) [1151]
- Scan automation: when ABCD/XY button unlit → no effect (Scan) [1151]
- GATE OUT: when SENSE up, joystick moving → high [1151]
- GATE OUT: when joystick stops → goes low [1151]
- GATE OUT: when Manual Gate held → high regardless of SENSE [1151]
- Recording: when TRIGGER unpatched → starts/stops on button [1151]
- Recording: when TRIGGER patched → starts/stops on next trigger [1151]
- Playback: when TRIGGER patched → armed, waits for trigger [1151]
- Playback: when LOOP UNLIT → plays once, ignores triggers (One-shot) [1151]
- Loop: when each new trigger → restarts loop (Loop) [1151]
- Playback: when LOOP FLASHING, trigger → plays once per trigger (Retrigger) [1151]
- LOOP FLASHING: when TRIGGER unpatched → same as UNLIT [1151]
- Punch-in recording: when TRIGGER patched → unaffected by trigger [1151]
- New recording: when made → overwrites existing [1151]
- PLAY: when no recording → does nothing [1151]
- Gx/Qx outputs: when ABCD/XY unlit → still output gates [1151]
- Gx/Qx outputs: when CV inputs or looper → affected [1151]
- Ramped loop: when enabled → fade at loop boundary [1151]

## Sources

- [1151] Intellijel Planar² Manual v1.3 (manual): https://intellijel.com/downloads/manuals/planar-2_manual_v1.3_2024.04.16.pdf
- [1152] Intellijel Planar² product page (product_page): https://intellijel.com/shop/eurorack/planar-2/

Full record as JSON: https://eurorackref.com/intellijel/planar-2.json
