# Pedal I/O 1U (Intellijel)

Canonical page: https://eurorackref.com/intellijel/pedal-i-o-1u/

- id: `intellijel/pedal-i-o-1u`
- width: 16 HP; depth: 29 mm
- power: +12 V 10 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Send / return, External Audio I/O

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio | audio to pedals | not stated | unknown | — | 1265 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| MIX | audio | returned audio mix | not stated | unknown | MIX (DRY/WET), return circuit | 1265 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| SEND LEVEL | knob | send level | — | send circuit | 1265 |
| RETURN LEVEL | knob | return level | — | return circuit | 1265 |
| PHASE INVERT | switch | return phase invert | — | return circuit | 1265 |
| MIX (DRY/WET) | knob | wet/dry balance | — | MIX | 1265 |
| PEDAL/LINE | switch | send level select | — | send circuit | 1265 |

## Modes

- Pedal level (PEDAL/LINE = PEDAL) [1265]
- Line level (PEDAL/LINE = LINE) [1265]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 1265 |
| module | depth | 29 mm | — | 1265 |
| module | +12V current | 10 mA | — | 1265 |
| module | -12V current | 10 mA | — | 1265 |
| module | width | 16 HP | — | 1266 |
| module | depth | 29 mm | — | 1266 |
| module | +12V current | 10 mA | — | 1266 |
| module | -12V current | 10 mA | — | 1266 |
| IN | input level nominal | 0 dBV | — | 1265 |
| IN | input level max | 17 dBV | — | 1265 |
| IN | input impedance | 60000 ohms | — | 1265 |
| IN | gain | -30 to -20 dB | — | 1265 |
| SEND | output level nominal | -30 to -20 dBV | PEDAL mode | 1265 |
| SEND | output level nominal | -5 to 5 dBV | LINE mode | 1265 |
| SEND | output impedance | 12000 ohms | — | 1265 |
| RETURN | input level nominal | -30 to -20 dBV | — | 1265 |
| RETURN | input impedance | 1000000 ohms | — | 1265 |
| RETURN | gain | ≤ 30 dB | from fully off | 1265 |
| MIX | output level nominal | 0 dBV | — | 1265 |
| MIX | output level max | 17 dB | — | 1265 |
| MIX | output impedance | 100 ohms | — | 1265 |
| MIX | frequency response | 20 to 22000 Hz | — | 1265 |
| MIX | THD | 0.002 to 0.085 % | Return min, Send max | 1265 |
| MIX | THD | 0.04 to 4 % | Return max, Send max | 1265 |
| Pedal I/O Jacks 1U | width | 8 HP | — | 1265 |
| Pedal I/O Jacks 1U | depth | 44 mm | — | 1265 |

## Behavior

- PHASE INVERT: when DOWN → return in phase [1265]
- PHASE INVERT: when UP → return 180° out of phase [1265]
- MIX (DRY/WET): when fully counterclockwise → only dry in MIX [1265]
- MIX (DRY/WET): when fully clockwise → only wet in MIX [1265]
- MIX (DRY/WET): when noon → equal wet and dry [1265]
- CLIP: when return level near clipping → LED lights [1265]
- triode emulator: when high return gain → tube-like overdrive [1265]
- RETURN: when instrument plugged in → appears at MIX [1265]
- module: when version 1 → no phase/level switches [1265]
- PEDAL/LINE: when PEDAL → -30 to -20 dBV send [1265]
- PEDAL/LINE: when LINE → -5 to +5 dBV send [1265]

## Sources

- [1265] intellijel Pedal I/O 1U manual (manual): https://intellijel.com/downloads/manuals/pedal-io-1u_manual_2021.11.15.pdf
- [1266] intellijel Pedal I/O 1U product page (product_page): https://intellijel.com/shop/eurorack/1u/pedal-io-1u/

Full record as JSON: https://eurorackref.com/intellijel/pedal-i-o-1u.json
