# Outs (Intellijel)

Canonical page: https://eurorackref.com/intellijel/outs/

- id: `intellijel/outs`
- width: 6 HP; depth: 34 mm
- power: +12 V 37 mA, −12 V 29 mA, +5 V ? mA
- status: current
- functions: External Audio I/O, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| L Input | audio | left audio input | not stated | unknown | — | 697 |
| R Input | audio | right audio input | not stated | unknown | L Input | 697 |
| 3-pin connector | audio | Mixup chain input | not stated | unknown | — | 697 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| L Line Out | audio | balanced left line out | unknown | unknown | Line output stage, L Input | 697 |
| R Line Out | audio | balanced right line out | unknown | unknown | Line output stage, R Input | 697 |
| HEADPHONE Output | audio | stereo headphone out | unknown | unknown | Headphone amp | 697 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| L+R LINE OUT Level | knob | line out level | — | Line output stage, L Line Out, R Line Out | 697 |
| HEADPHONE Level | knob | headphone volume | — | Headphone amp, HEADPHONE Output | 697 |
| JP1 | jumper | L-to-R normal jumper | — | R Input | 697 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Line outs | output level | 4 dBu | knob 12 o'clock, 10Vpp sine | 697 |
| Line outs | maximum output level | 21 dBu | knob fully clockwise | 697 |
| Line outs | output level | -10 dBV | knob 10 o'clock, 10Vpp sine | 697 |
| Module | width | 6 hp | — | 697 |
| Module | depth | 34.5 mm | — | 697 |
| Module | current +12V | 37 mA | maximum amplification | 697 |
| Module | current -12V | 29 mA | maximum amplification | 697 |

## Behavior

- R Input: when unpatched → L Input feeds both [697]
- LED Level Indicators: when signal only at L Input → both LEDs light [697]
- JP1: when removed → L not normalled to R [697]
- 3-pin connector: when front input jack patched → front panel signal overrides Mixup [697]
- JP1: when Mixup linked → remove jumper [697]

## Sources

- [697] Intellijel Outs Manual (2021-08-04) (manual): https://intellijel.com/downloads/manuals/outs_manual_2021.08.04.pdf
- [698] Intellijel Outs product page (product_page): https://intellijel.com/shop/eurorack/outs/

Full record as JSON: https://eurorackref.com/intellijel/outs.json
