# Morgasmatron (Intellijel)

Canonical page: https://eurorackref.com/intellijel/morgasmatron/

- id: `intellijel/morgasmatron`
- width: 20 HP; depth: 38 mm
- power: +12 V 113 mA, −12 V 102 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Distortion / Saturation, Crossfader, Ring Modulator, Attenuverter / Offset

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN A | audio | filter audio input | not stated | not stated | — | 1037 |
| Q A | cv | resonance CV input | not stated | not stated | — | 1037 |
| 1V/OCT A | pitch | cutoff pitch tracking | not stated | not stated | — | 1037 |
| FM1 A | cv | cutoff CV input | not stated | not stated | — | 1037 |
| FM2 A | cv | cutoff CV input | not stated | not stated | — | 1037 |
| IN B | audio | filter audio input | not stated | not stated | — | 1037 |
| Q B | cv | resonance CV input | not stated | not stated | — | 1037 |
| 1V/OCT B | pitch | cutoff pitch tracking | not stated | not stated | 1V/OCT A | 1037 |
| FM1 B | cv | cutoff CV input | not stated | not stated | — | 1037 |
| FM2 B | cv | cutoff CV input | not stated | not stated | FM2 A | 1037 |
| XFADE CV | cv, audio | crossfade CV input | not stated | not stated | — | 1037 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT A | audio | filter audio output | not stated | not stated | Filter A | 1037 |
| OUT B | audio | filter audio output | not stated | not stated | Filter B | 1037 |
| MIX OUT | audio | blend of filters | not stated | not stated | XFADE, Filter A, Filter B | 1037 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| CUTOFF A | knob | cutoff frequency | — | Filter A | 1037 |
| FM1 A knob | knob | FM1 attenuator | — | FM1 A | 1037 |
| FM2 A knob | knob | FM2 attenuverter | — | FM2 A | 1037 |
| MODE A | knob | filter mode select | — | Filter A | 1037 |
| Q A knob | knob | filter resonance | — | Filter A | 1037 |
| Q-DRIVE A | knob | resonance drive | — | Filter A | 1037 |
| IN A knob | knob | input drive | — | IN A, Filter A | 1037 |
| CUTOFF B | knob | cutoff frequency | — | Filter B | 1037 |
| FM1 B knob | knob | FM1 attenuator | — | FM1 B | 1037 |
| FM2 B knob | knob | FM2 attenuverter | — | FM2 B | 1037 |
| MODE B | knob | filter mode select | — | Filter B | 1037 |
| Q B knob | knob | filter resonance | — | Filter B | 1037 |
| Q-DRIVE B | knob | resonance drive | — | Filter B | 1037 |
| IN B knob | knob | input drive | — | IN B, Filter B | 1037 |
| OVERDRIVE | switch | Filter A overdrive | — | Overdrive, Filter A | 1037 |
| DRY A | switch | bypass Filter A | — | Filter A, XFADE | 1037 |
| DRY B | switch | bypass Filter B | — | Filter B, XFADE | 1038 |
| PHASE INVERT | switch | invert Filter B phase | — | Filter B, XFADE | 1037 |
| SERIES/PARALLEL | switch | filter routing | — | Filter A, Filter B | 1037 |
| XFADE | knob | A/B balance at MIX | — | XFADE, MIX OUT | 1037 |
| XFADE ATTENUVERTER | knob | XFADE CV depth/polarity | — | XFADE CV, XFADE | 1037 |

## Modes

- LP2 (A) (MODE A = LP2) [1037]
- LP1 (A) (MODE A = LP1) [1037]
- BP1 (A) (MODE A = BP1) [1037]
- HP1 (A) (MODE A = HP1) [1037]
- HP2 (A) (MODE A = HP2) [1037]
- BR1 (A) (MODE A = BR1) [1037]
- LP2 (B) (MODE B = LP2) [1037]
- LP1 (B) (MODE B = LP1) [1037]
- BP1 (B) (MODE B = BP1) [1037]
- HP1 (B) (MODE B = HP1) [1037]
- HP2 (B) (MODE B = HP2) [1037]
- BR1 (B) (MODE B = BR1) [1037]
- Series (SERIES/PARALLEL = up) [1037]
- Parallel (SERIES/PARALLEL = down) [1037]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Filter | modes per filter | 6 modes | — | 1037 |
| IN knob | unity gain position | 12 o'clock | 10Vp-p input | 1037 |
| module | width | 20 HP | — | 1037 |
| module | maximum depth | 38 mm | — | 1037 |
| module | current +12V | 113 mA | — | 1037 |
| module | current -12V | 102 mA | — | 1037 |

## Behavior

- Filter A: when Q at maximum → self-oscillates, sine output [1037]
- Q-DRIVE A: when Q turned down → no effect [1037]
- Q-DRIVE A: when filter self-oscillating → soft-clips sine wave [1037]
- OVERLOAD LED A: when output soft clips → illuminates [1037]
- Filter B: when Q at maximum → self-oscillates, sine output [1037]
- Q-DRIVE B: when Q turned down → no effect [1037]
- Q-DRIVE B: when filter self-oscillating → soft-clips sine wave [1037]
- OVERLOAD LED B: when output soft clips → illuminates [1037]
- 1V/OCT B: when unpatched → normalled from 1V/OCT A [1037]
- FM2 B: when unpatched → normalled from FM2 A [1037]
- FM1 knob: when fully clockwise → FM1 tracks 1V/Oct [1037]
- Filter A: when OVERDRIVE off → clean except soft-clipping [1037]
- XFADE CV: when patched → summed with XFADE knob [1037]
- Filter B: when Series mode → fed by Filter A [1037]
- Overdrive: when available on → Filter A only [1037]
- MIX OUT: when filters inverted, levels balanced → signals cancel [1037]

## Sources

- [1037] Intellijel Morgasmatron Manual (2021.08.03) (manual): https://intellijel.com/downloads/manuals/morgasmatron_manual_2021.08.03.pdf
- [1038] Intellijel Morgasmatron product page (product_page): https://intellijel.com/shop/eurorack/morgasmatron/

Full record as JSON: https://eurorackref.com/intellijel/morgasmatron.json
