# Tain (Instruō)

Canonical page: https://eurorackref.com/instruo/tain/

- id: `instruo/tain`
- width: 4 HP; depth: 27 mm
- power: +12 V 10 mA, −12 V 5 mA, +5 V ? mA
- status: current
- functions: Sequential / Voltage Switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Switch Control Input 1 | gate, trigger | switch state control | not stated | unknown | — | 1896 |
| Switch Control Input 2 | gate, trigger | switch state control | not stated | unknown | — | 1896 |

## Bidirectional jacks

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Ch1 I/O A | audio, cv, gate, trigger | switch I/O | not stated | unknown | — | 1896 |
| Ch1 I/O B | audio, cv, gate, trigger | switch I/O | not stated | unknown | — | 1896 |
| Ch1 I/O C | audio, cv, gate, trigger | switch I/O | not stated | unknown | — | 1896 |
| Ch2 I/O A | audio, cv, gate, trigger | switch I/O | not stated | unknown | — | 1896 |
| Ch2 I/O B | audio, cv, gate, trigger | switch I/O | not stated | unknown | — | 1896 |
| Ch2 I/O C | audio, cv, gate, trigger | switch I/O | not stated | unknown | — | 1896 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Switch Button 1 | button | change switch state | — | Channel 1 | 1896 |
| Switch Button 2 | button | change switch state | — | Channel 2 | 1896 |
| Mode Toggle 1 | switch | momentary/latching select | — | Switch Control Input 1, Switch Button 1 | 1896 |
| Mode Toggle 2 | switch | momentary/latching select | — | Switch Control Input 2, Switch Button 2 | 1896 |
| Reference Trimmer | knob | reference voltage | -10 to 10 V | bottom I/O jack | 1896 |

## Modes

- Momentary Mode (Mode Toggle 1 = up) [1896]
- Latching Mode (Mode Toggle 1 = down) [1896]
- 1 in 2 out [1896]
- 2 in 1 out [1896]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1896 |
| module | depth | 27 mm | — | 1896 |
| module | +12V current | 10 mA | — | 1896 |
| module | -12V current | 5 mA | — | 1896 |
| Reference Trimmer | reference voltage | -10 to 10 V | — | 1896 |

## Behavior

- Switch Button: when Momentary, control signal present → XOR with Switch Input (Momentary Mode) [1896]
- switch state: when Momentary, Switch Input high → secondary state (Momentary Mode) [1896]
- switch state: when Momentary, button held → secondary state (Momentary Mode) [1896]
- switch state: when Momentary, input low, released → returns to primary (Momentary Mode) [1896]
- switch state: when Latching, rising edge → toggles state (Latching Mode) [1896]
- switch state: when Latching, button press → toggles state (Latching Mode) [1896]
- Switch Button: when secondary state active → illuminates white [1896]
- bottom I/O jack: when unpatched → receives Reference Trimmer voltage [1896]

## Sources

- [1896] Instruō Tain manual (manual): https://www.instruomodular.com/wp-content/uploads/2020/09/tain-Manual-A5.pdf
- [1897] Instruō Tain product page (product_page): https://www.instruomodular.com/product/tain/

Full record as JSON: https://eurorackref.com/instruo/tain.json
