# øchd (Instruō)

Canonical page: https://eurorackref.com/instruo/ochd/

- id: `instruo/ochd`
- width: 4 HP; depth: 32 mm
- power: +12 V 80 mA, −12 V 80 mA, +5 V ? mA
- status: current
- functions: LFO

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Rate CV Input | cv | global rate CV | not stated | bipolar | — | 888 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| LFO 1 Output | cv, audio | triangle LFO output | -5 to 5 V | bipolar | LFO 1 | 888 |
| LFO 2 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 2 | 888 |
| LFO 3 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 3 | 888 |
| LFO 4 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 4 | 888 |
| LFO 5 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 5 | 888 |
| LFO 6 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 6 | 888 |
| LFO 7 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 7 | 888 |
| LFO 8 Output | cv | triangle LFO output | -5 to 5 V | bipolar | LFO 8 | 888 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Rate | knob | global LFO frequency | — | LFO 1, LFO 2, LFO 3, LFO 4, LFO 5, LFO 6, LFO 7, LFO 8 | 888 |
| Rate Attenuverter | knob | scales/inverts Rate CV | — | Rate CV Input | 888 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| LFO 1 | maximum frequency | 160 Hz | Rate fully clockwise, no CV | 888 |
| LFO 8 | slowest cycle | 25 min | Rate fully anticlockwise, no CV | 888 |
| LFO 1 | frequency | 3 to 7 Hz | Rate knob centre | 888 |
| module | width | 4 HP | — | 888 |
| module | depth | 32 mm | — | 888 |
| module | +12V current | 80 mA | — | 888 |
| module | -12V current | 80 mA | — | 888 |

## Behavior

- Rate CV Input: when positive CV applied → LFOs exceed knob range [888]
- Rate CV Input: when negative CV applied → LFOs stall, track and hold [888]
- Rate: when fully clockwise → each LFO at range top [888]
- Rate: when fully anticlockwise → each LFO at range bottom [888]

## Sources

- [888] Instruō øchd User Manual (manual): https://www.instruomodular.com/wp-content/uploads/2020/05/Ochd-Manual-A5.pdf
- [889] Instruō øchd product page (product_page): https://www.instruomodular.com/product/ochd/

Full record as JSON: https://eurorackref.com/instruo/ochd.json
