# dåpf (Instruō)

Canonical page: https://eurorackref.com/instruo/dapf/

- id: `instruo/dapf`
- width: 4 HP; depth: 30 mm
- power: +12 V 60 mA, −12 V 60 mA, +5 V ? mA
- status: current
- functions: Chorus / Flanger / Phaser, 1V/Oct Pitch Tracking, Attenuverter / Offset, Stereo Inputs / Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Channel 1 Input | audio | channel 1 all-pass input | not stated | unknown | Channel 2 Input | 896 |
| Channel 1 Phase CV Input | cv | phase CV | not stated | bipolar | — | 896 |
| Channel 2 Input | audio | channel 2 all-pass input | not stated | unknown | Channel 1 Output | 896 |
| Channel 2 Phase CV Input | cv | phase CV | not stated | bipolar | — | 896 |
| 1V/Oct Input | pitch, cv | global 1V/Oct tracking | not stated | bipolar | — | 896 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Channel 1 Output | audio | channel 1 filtered output | not stated | unknown | Channel 1 | 896 |
| Channel 2 Output | audio | channel 2 filtered output | not stated | unknown | Channel 2 | 896 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Pole Toggle | switch | channel 1 slope | — | Channel 1 | 896 |
| Channel 1 Phase Slider | fader | centre frequency / phase | — | Channel 1 | 896 |
| Channel 1 Phase CV Attenuverter | knob | phase CV depth/polarity | — | Channel 1 Phase CV Input | 896 |
| Channel 2 Phase Slider | fader | centre frequency / phase | — | Channel 2 | 896 |
| Channel 2 Phase CV Attenuverter | knob | phase CV depth/polarity | — | Channel 2 Phase CV Input | 896 |

## Modes

- 1-Pole (Pole Toggle = left) [896]
- 2-Pole (Pole Toggle = right) [896]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Channel 1 | slope | -6 dB/oct | Pole Toggle left | 896 |
| Channel 1 | slope | -12 dB/oct | Pole Toggle right | 896 |
| Channel 1 Phase Slider | phase shift range | 180 degrees | 1-Pole | 896 |
| Channel 1 Phase Slider | phase shift range | 360 degrees | 2-Pole | 896 |
| Channel 2 Phase Slider | phase shift range | 360 degrees | — | 896 |
| module | width | 4 HP | — | 896 |
| module | depth | 30 mm | — | 896 |
| module | +12V current | 60 mA | — | 896 |
| module | -12V current | 60 mA | — | 896 |

## Behavior

- Channel 1 Output: when unpatched → channel 1 feeds Channel 2 Output [896]
- Channel 2 Input: when Channel 1 Input unpatched → normals to both channels [896]
- Channel 2 Output: when Ch1 Input and Output unpatched → mono sum of both filters [896]
- Channel 2 Input: when hot input level → attenuate to avoid clipping [896]
- Phase CV Input: when bipolar CV, slider low → negative voltage clips [896]

## Sources

- [896] Instruō dåpf User Manual (manual): https://www.instruomodular.com/wp-content/uploads/2024/11/dapf-Manual.pdf
- [897] Instruō dåpf product page (product_page): https://www.instruomodular.com/product/dapf/

Full record as JSON: https://eurorackref.com/instruo/dapf.json
