# dàil (Instruō)

Canonical page: https://eurorackref.com/instruo/dail/

- id: `instruo/dail`
- width: 4 HP; depth: 32 mm
- power: +12 V 100 mA, −12 V 8 mA, +5 V ? mA
- status: current
- functions: Quantizer, Voltage Math / Precision Adder, MIDI-to-CV Interface, Slew Limiter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV Input | cv, pitch | quantiser input | -10 to 10 V | bipolar | — | 900 |
| Signal Throughput | cv, pitch | transposition input | -10 to 10 V | bipolar | — | 900 |
| Clock Input | clock, trigger | sample and hold clock | not stated | unknown | — | 900 |
| TRS MIDI Input | midi | MIDI input | unknown | unknown | — | 900 |
| Expansion Back Jack | — | expander connection | unknown | unknown | — | 900 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Output | cv, pitch | summed quantised output | -10 to 10 V | bipolar | Quantiser, Precision Adder, Signal Throughput | 900 |
| Trigger Output | trigger | trigger per quantised update | ≤ 5 V | unknown | Quantiser | 900 |
| Gate Output | gate | MIDI note gate | not stated | unknown | MIDI-to-CV interface | 900 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Interface Selection Toggle | switch | operational interface page | — | Quantiser, Precision Adder | 900 |
| Slider | fader | multi-purpose control | — | Quantiser, Slew | 900 |
| Button 1 | button | multi-purpose button | — | Quantiser, Precision Adder | 900 |
| Button 2 | button | multi-purpose button | — | Quantiser, Precision Adder | 900 |
| A\|B Switch | switch | TRS MIDI type | — | TRS MIDI Input | 900 |
| Firmware Update Button | button | firmware update entry | — | — | 900 |

## Modes

- Programming Interface (Interface Selection Toggle = left) [900]
- Quantiser Interface (Interface Selection Toggle = centre) [900]
- Precision Adder Interface (Interface Selection Toggle = right) [900]
- MIDI-to-CV Interface [900]
- Natural Distribution Mode [900]
- Equal Distribution Mode [900]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Octave offset | range | -9 to 9 V | Quantiser Interface | 900 |
| Chromatic offset | range | -9 to 9 V | Precision Adder Interface | 900 |
| MIDI note latch | minimum hold | 200 ms | — | 900 |
| MIDI note unlatch | maximum duration | 200 ms | — | 900 |
| USB device | current | ≤ 500 mA | — | 900 |
| Module | width | 4 HP | — | 900 |
| MIDI Expander | width | 2 HP | — | 900 |
| Module | depth | 32 mm | — | 900 |
| Module | +12V current | 100 mA | without USB device | 900 |
| Module | -12V current | 8 mA | — | 900 |

## Behavior

- Clock Input: when rising edge and new note → Output updates, trigger fires [900]
- Trigger Output: when quantised voltage updates → emits trigger [900]
- Programming changes: when until entering interface → not committed [900]
- Slew: when Precision Adder offsets → applied immediately, unslewed [900]
- Octave offset: when both buttons pressed → reset to 0V (Quantiser Interface) [900]
- Natural Distribution: when CV crosses note threshold → quantised state changes [900]
- Equal Distribution: when active → notes spread equal thresholds [900]
- MIDI input: when default → programs quantiser scale [900]
- MIDI input: when MIDI-to-CV Interface → 1V/oct, gate, trigger (MIDI-to-CV Interface) [900]
- A|B Switch: when default → Type A [900]
- +12V draw: when USB device connected → increases [900]

## Sources

- [900] Instruō dàil User Manual (manual): https://www.instruomodular.com/wp-content/uploads/2024/08/dail-Manual.pdf
- [901] Instruō dàil product page (product_page): https://www.instruomodular.com/product/dail/

Full record as JSON: https://eurorackref.com/instruo/dail.json
