# [1]f (Instruō)

Canonical page: https://eurorackref.com/instruo/1f/

- id: `instruo/1f`
- width: 2 HP; depth: 27 mm
- power: +12 V 8 mA, −12 V 8 mA, +5 V ? mA
- status: current
- functions: Crossfader, Attenuverter / Offset, Manual Controller

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Input 1 | audio, cv | signal input | not stated | unknown | not stated | 931 |
| Input 2 | audio, cv | signal input | not stated | unknown | not stated | 931 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Output | audio, cv | processed output / offset | -10 to 10 V | bipolar | Crossfader, DC offset | 931 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Polarity Switch | switch | inverts polarity | — | Input 1, Input 2, Output | 931 |
| Fader | fader | crossfade / level | — | Crossfader, DC offset, Output | 931 |

## Modes

- Crossfader [931]
- Attenuator (Polarity Switch = up) [931]
- Attenuverter (Polarity Switch = down) [931]
- Unipolar Positive DC Offset (Polarity Switch = up) [931]
- Unipolar Negative DC Offset (Polarity Switch = down) [931]
- Unipolar Positive DC Offset Crossfader (Polarity Switch = up) [931]
- Unipolar Negative DC Offset Crossfader (Polarity Switch = down) [931]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 2 HP | — | 931 |
| module | depth | 27 mm | — | 931 |
| power | +12V current | 8 mA | — | 931 |
| power | -12V current | 8 mA | — | 931 |
| DC offset | output range | 0 to 10 V | Polarity Switch up | 931 |
| DC offset | output range | -10 to 0 V | Polarity Switch down | 931 |

## Behavior

- Output: when no inputs patched → unipolar DC offset [931]
- Polarity Switch: when down → inverts input signals [931]
- Fader: when up, both inputs patched → Input 1 passes [931]
- Fader: when moved down, both patched → crossfades to Input 2 [931]
- Fader: when lowest, Input 1 only → attenuates to 0V [931]
- Fader: when highest, no inputs, switch up → +10V at Output [931]
- Fader: when highest, no inputs, switch down → -10V at Output [931]
- Fader: when up, Input 2 only → Output passes ±10V offset [931]
- Fader: when down, Input 2 only → crossfades to Input 2 [931]

## Sources

- [931] Instruō [1]f User Manual (manual): https://www.instruomodular.com/wp-content/uploads/2021/10/1f-Manual-1.pdf
- [932] Instruō [1]f product page (product_page): https://www.instruomodular.com/product/1f/

Full record as JSON: https://eurorackref.com/instruo/1f.json
