# ESX-8CV (Expert Sleepers)

Canonical page: https://eurorackref.com/expert-sleepers/esx-8cv/

- id: `expert-sleepers/esx-8cv`
- width: 4 HP; depth: 49 mm
- power: +12 V 41 mA, −12 V 33 mA, +5 V ? mA
- status: current

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Expansion connector | — | link from ES-4/ES-40/ES-5 | not stated | unknown | — | 1884 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Output 1 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 2 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 3 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 4 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 5 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 6 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 7 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |
| Output 8 | cv, pitch | CV output | -5.33 to 5.33 V | bipolar | DACs | 1885 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Trim pot | knob | output calibration | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1884 |
| Jumper | jumper | output range | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1884 |

## Modes

- calibrated (Jumper = not fitted) [1884]
- jumper fitted (Jumper = fitted) [1884]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1885 |
| module | depth | 49 mm | — | 1885 |
| module | +12V current | 41 mA | — | 1885 |
| module | -12V current | 33 mA | — | 1885 |
| module | CV outputs | 8 jacks | — | 1885 |
| DACs | resolution | 12 bit | — | 1885 |
| outputs | output voltage | -5.33 to 5.33 V | hardware calibrated | 1885 |
| outputs | output voltage | -9.5 to 9.5 V | uncalibrated (jumper) | 1885 |
| outputs | output voltage | -9.1 to 9.1 V | jumper fitted, approximate | 1884 |
| outputs | update rate | 0.041666666666666664 to 0.3333333333333333 x sample rate | depends on active channels | 1885 |
| outputs | update rate | 2 to 16 kHz | at 48kHz sample rate | 1885 |
| outputs | zero offset | ≤ 20 mV | approximate, uncalibrated | 1884 |
| outputs | calibration | 1 V/oct | factory | 1884 |
| outputs | calibration | 1.2 V/oct | recalibrated for Buchla | 1884 |

## Behavior

- output rate: when more channels active → lower update rate [1885]
- outputs: when audio-rate modulation → not fast enough [1885]
- Jumper: when fitted → range approx ±9.1V [1884]
- Jumper: when fitted → calibration-dependent software misbehaves [1884]
- Jumper: when factory default → not fitted [1884]
- Trim pot: when adjusted → all outputs change together [1884]
- Expansion connector: when connected to Doepfer power bus → fuses supply, destroys module [1884]
- outputs: when no Combiner software → no output signals [1885]

## Sources

- [1884] Expert Sleepers ESX-8CV manual (manual): https://www.expert-sleepers.co.uk/esx8cvusermanual.html
- [1885] Expert Sleepers ESX-8CV product page (product_page): https://www.expert-sleepers.co.uk/esx8cv.html

Full record as JSON: https://eurorackref.com/expert-sleepers/esx-8cv.json
