# Disting MK4 (Expert Sleepers)

Canonical page: https://eurorackref.com/expert-sleepers/disting-mk4/

- id: `expert-sleepers/disting-mk4`
- width: 4 HP; depth: 42 mm
- power: +12 V 51 mA, −12 V 19 mA, +5 V ? mA
- status: current
- functions: Voltage Math / Precision Adder, Ring Modulator, VCA, Quantizer, Logic Gates, Wavefolder, Random / Sample & Hold CV, Noise Source, Slew Limiter, Envelope Follower, Delay, Tempo / Clock Sync, LFO, Digital / Wavetable Oscillator, 1V/Oct Pitch Tracking, Linear FM, Pulse Width Modulation, Waveshape Morphing, Chorus / Flanger / Phaser, Vocoder / Spectral Processor, Distortion / Saturation, Multimode Filter, Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, ADSR Envelope, Compressor / Dynamics, Stereo Inputs / Outputs, MIDI-to-CV Interface, Master Clock, Clock Divider / Multiplier, Crossfader, Euclidean rhythm, Gate / Trigger Utility, Sample Player, Reverse playback, Audio Buffer Recording / Looper, Reverb, Freeze / Hold, Mixer, Stereo Panning, Chaotic / Complex Modulation, Sequential / Voltage Switch, Attenuverter / Offset, Lowpass Gate, Pitch Shifter / Frequency Shifter, Unipolar/bipolar switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Z input | cv, audio | Z CV input | not stated | bipolar | — | 858 |
| X input | audio, cv, pitch, gate, trigger, clock | algorithm-dependent input | not stated | bipolar | — | 858 |
| Y input | audio, cv, pitch, gate, trigger, clock | algorithm-dependent input | not stated | bipolar | — | 858 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| A output | audio, cv, gate, trigger | algorithm-dependent output | not stated | bipolar | Algorithm engine | 858 |
| B output | audio, cv, gate, trigger | algorithm-dependent output | not stated | bipolar | Algorithm engine | 858 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| S | knob | encoder: menu, parameters | — | Algorithm engine | 858 |
| Z knob | knob | algorithm control Z | — | Algorithm engine | 858 |

## Modes

- A-1 Precision Adder [858]
- A-2 Four Quadrant Multiplier [858]
- A-3 Full-wave Rectifier [858]
- A-4 Minimum/maximum [858]
- A-5 Linear/Exponential Converter [858]
- A-6 Quantizer [858]
- A-7 Comparator [858]
- A-8 Dual Waveshaper [858]
- B-1 Sample and Hold [858]
- B-2 Slew Rate Limiter [858]
- B-3 Pitch and Envelope Tracker [858]
- B-4 Clockable Delay/Echo [858]
- B-5 LFO [858]
- B-6 Clockable LFO [858]
- B-7 VCO with linear FM [858]
- B-8 VCO with waveshaping [858]
- C-1 Counter [858]
- C-2 Voltage Controlled Delay Line [858]
- C-3 Clockable Ping Pong Delay (Z feedback) [858]
- C-4 Clockable Ping Pong Delay (Z input pan) [858]
- C-5 Resonator [858]
- C-6 Vocoder [858]
- C-7 Phaser [858]
- C-8 Bit Crusher [858]
- D-1 DJ Filter [858]
- D-2 Tape Delay [858]
- D-3 Waveform Animator [858]
- D-4 State Variable Filter [858]
- D-5 LP/HP Filter [858]
- D-6 LP/BP Filter [858]
- D-7 BP/HP Filter [858]
- D-8 BP/Notch Filter [858]
- E-1 AR Envelope [858]
- E-2 AR Envelope & VCA [858]
- E-3 Dual AR Envelope [858]
- E-4 Stereo Compressor [858]
- E-5 Side-chain Compressor [858]
- E-6 Mono Compressor [858]
- E-7 Euro to Buchla Converter [858]
- E-8 Buchla to Euro Converter [858]
- F-1 Clockable AD Envelope (with mute) [858]
- F-2 Clockable AD Envelope (with gate) [858]
- F-3 Clockable AD Envelope (with trigger) [858]
- F-4 Clockable AD Envelope & VCA [858]
- F-5 Shift Register Random CVs [858]
- F-6 Shift Register Random Quantized CVs [858]
- F-7 Shift Register Random Triggers [858]
- F-8 Shift Register Random Dual Triggers [858]
- G-1 ES-1 Emulation [858]
- G-2 ES-2 Emulation [858]
- G-3 Pitch Reference [858]
- G-4 Frequency Reference [858]
- G-5 Tuner [858]
- G-6 Clock [858]
- G-7 MIDI/CV [858]
- G-8 CV/MIDI [858]
- H-1 Crossfade/Pan [858]
- H-2 Dual Sample and Hold [858]
- H-3 Dual Quantizer (Z scale) [858]
- H-4 Dual Quantizer [858]
- H-5 Dual Euclidean Patterns [858]
- H-6 Dual Delayed Pulse Generator [858]
- H-7 Noise [858]
- H-8 Quantizer 2 [858]
- I-1 Audio Playback [858]
- I-2 Clocked Audio Playback [858]
- I-3 Audio Playback with V/Oct [858]
- I-4 Audio Playback with Z Speed [858]
- I-5 Audio Playback with Reverse [858]
- I-6 Audio Playback with Scrub [858]
- I-7 Dual Audio Playback [858]
- I-8 Dual Audio Playback with Z Speed [858]
- J-1 MIDI File Playback (Clocked) [858]
- J-2 Multisample 2 Audio Playback [858]
- J-3 MIDI File Playback (Free Running) [858]
- J-4 Audio Playback with End CV [858]
- J-5 Audio Recorder [858]
- J-6 Multisample Audio Playback [858]
- J-7 Mono Audio Recorder [858]
- J-8 Audio Playback with Crossfade [858]
- K-1 Wavetable VCO [858]
- K-2 Clockable Wavetable LFO [858]
- K-3 Wavetable Waveshaper [858]
- K-4 Clockable Wavetable Envelope [858]
- K-5 Programmable Quantizer [858]
- K-6 Clockable SD Delay [858]
- K-7 Stereo Clockable SD Delay [858]
- K-8 Stereo Clockable SD Delay (Z clock) [858]
- L-1 Stereo Reverb [858]
- L-2 Mono-to-Stereo Reverb [858]
- L-3 Dual Reverb [858]
- L-4 Dual Vowel Filter [858]
- L-5 Stereo Chorus [858]
- L-6 Mono Chorus [858]
- L-7 Mixer [858]
- L-8 Gate [858]
- M-1 Delayed LFO [858]
- M-2 Scaled LFO [858]
- M-3 Logic [858]
- M-4 Half-wave Rectifier [858]
- M-5 Stereo Filter [858]
- M-6 Stereo Tape Delay [858]
- M-7 Granular Pitch Shifter [858]
- M-8 Chaos [858]
- N-1 Switch [858]
- N-2 Rotary [858]
- N-3 Attenuverter/Offset [858]
- N-4 Low Pass Gate [858]
- N-5 Pulsar VCO [858]
- N-6 Phase Shifter [858]
- N-7 Frequency Shifter [858]
- N-8 Clockable SD Ping Pong [858]
- Favourites O1-P8 [858]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 859 |
| module | depth | 42 mm | — | 859 |
| power | +12V current | 51 mA | — | 858 |
| power | -12V current | 19 mA | — | 858 |
| X & Y inputs, A & B outputs | sample rate | 75 kHz | — | 859 |
| Z input | sample rate | 75 kHz | — | 859 |
| ADC | resolution | 24 bit | — | 859 |
| ADC | THD+N | -93 dB | — | 859 |
| ADC | dynamic range | 99 dB | — | 859 |
| ADC | SNR | 99 dB | — | 859 |
| DAC | resolution | 24 bit | — | 859 |
| DAC | THD+N | -94 dB | — | 859 |
| DAC | dynamic range | 105 dB | — | 859 |
| DAC | SNR | 104 dB | — | 859 |
| CPU | clock | 50 MHz | PIC32MX, up to | 859 |
| algorithms | count | 112 algorithms | — | 858 |
| parameters | per algorithm | ≤ 8 parameters | — | 858 |
| presets | slots | 64 presets | — | 858 |
| favourites | slots | 16 algorithms | — | 858 |
| Knob Recorder | max duration | ≤ 14 s | a little under | 858 |
| WAV sample rate | reduced rate | 46875 Hz | setting 1 | 858 |
| audio playback | folders x files | 100 files | 100 folders of 100 | 858 |
| A-1 Precision Adder | offset range | -10 to 10 V | — | 858 |
| B-5 LFO | output level | -8 to 8 V | default | 858 |
| B-5 LFO | Z tune range | -10 to 10 Hz | approximately | 858 |
| B-7 VCO with linear FM | Z tune range | -0.5 to 0.5 octaves | — | 858 |
| A-6 Quantizer | trigger pulse length | 10 ms | 5V pulse | 858 |
| B-1 Sample and Hold | noise level | -8 to 8 V | — | 858 |
| A-7 Comparator | hysteresis | 0 to 10 V | Z 0-4V | 858 |
| A-5 Linear/Exponential Converter | scale | 0 to 2000 Hz/V | approximately | 858 |
| C-7 Phaser | sweep range | 0 to 8 V | — | 858 |
| L-8 Gate | threshold | 0 to 8 V | approximately | 858 |
| L-8 Gate | attack | 10 to 1800 ms | — | 858 |
| L-8 Gate | hold | 0 to 600 ms | — | 858 |
| L-8 Gate | release | 45 to 8000 ms | — | 858 |
| N-6 Phase Shifter | phase scaling | 5 V per 360° | — | 858 |

## Behavior

- preset 0: when at power-up → loaded [858]
- preset 0: when algorithm switched → new state saved [858]
- Z press: when algorithm uses tap tempo → acts as clock pulse [858]
- Z press: when multiple parameters, no override → cycles parameters [858]
- Knob Recorder: when Z released after recording → loops recording [858]
- Knob Recorder: when Z turned slightly → manual control regained [858]
- favourites: when empty slot → runs A1 Precision Adder [858]
- favourites: when at power-on → read from SD [858]
- Help: when no card → shows 'No card' [858]
- SD delay: when tap gap exceeds max → second tap ignored [858]
- Select Bus: when non-protocol MIDI arrives → treated as MIDI input [858]
- start-up: when calibration data missing → shows 'Uncalibrated' [858]
- A-4 Minimum/maximum: when Z above ~2.5V → outputs follow inputs (A-4 Minimum/maximum) [858]
- A-4 Minimum/maximum: when Z below ~-1.5V → outputs frozen (A-4 Minimum/maximum) [858]
- A-6 Quantizer: when Z positive → Y is transpose (A-6 Quantizer) [858]
- A-6 Quantizer: when Z negative → Y is trigger (A-6 Quantizer) [858]
- B-1 Sample and Hold: when Y exceeds 1V → X sampled (B-1 Sample and Hold) [858]
- clock inputs: when pulse exceeds 1V → clock registered [858]
- A-7 Comparator: when Z negative → hysteresis clamped zero (A-7 Comparator) [858]
- C-7 Phaser: when Y negative → treated as 0V (C-7 Phaser) [858]
- E-1 AR Envelope: when X or Y exceeds 1V → envelope triggered (E-1 AR Envelope) [858]
- F-1 Clockable AD Envelope: when Y over 1V → output forced 0V (F-1 Clockable AD Envelope (with mute)) [858]
- A-1 Precision Adder: when X unplugged, parameter 1=0 → B is inverted Y (A-1 Precision Adder) [858]
- H-5 Dual Euclidean Patterns: when Y pulse → pattern reset step 1 (H-5 Dual Euclidean Patterns) [858]
- L-1 Stereo Reverb: when Z pressed → freeze (L-1 Stereo Reverb) [858]

## Sources

- [858] Expert Sleepers Disting MK4 User Manual v4.28 (manual): https://www.expert-sleepers.co.uk/downloads/manuals/disting_user_manual_4.28.pdf
- [859] Expert Sleepers Disting MK4 product page (product_page): https://www.expert-sleepers.co.uk/disting.html

Full record as JSON: https://eurorackref.com/expert-sleepers/disting-mk4.json
