# A-183-2 Offset-Generator / Attenuator / Polarizer (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-183-2/

- id: `doepfer/a-183-2`
- width: 4 HP; depth: 20 mm
- power: +12 V 10 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Attenuverter / Offset

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| In | cv, audio | signal to attenuate/polarize | not stated | unknown | not stated | 531 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out 1 | cv | offset plus scaled input | unknown | unknown | Offset generator, Attenuator/Polarizer | 531 |
| Out 2 | cv | offset plus scaled input | unknown | unknown | Offset generator, Attenuator/Polarizer | 531 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Offset | knob | DC offset voltage | — | Offset generator, Out 1, Out 2 | 531 |
| Att. | knob | attenuator / polarizer level | — | In, Attenuator/Polarizer | 531 |
| Att./Pol. switch | switch | attenuator or polarizer mode | — | Att., Attenuator/Polarizer | 531 |
| JP3 | jumper | offset range select | — | Offset, Offset generator | 531 |

## Modes

- Attenuator (Att./Pol. switch = Att.) [531]
- Polarizer (Att./Pol. switch = Pol.) [531]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Offset | offset range | 0 to 5 V | JP3 upper | 531 |
| Offset | offset range | -5 to 5 V | JP3 lower | 531 |
| Attenuator/Polarizer | gain range | 0 to 1 x | Attenuator mode | 531 |
| Attenuator/Polarizer | gain range | -1 to 1 x | Polarizer mode | 531 |
| R5 | factory value | 100000 ohm | — | 531 |
| module | width | 4 HP | — | 531 |
| module | depth | 20 mm | — | 531 |
| module | current +12V | 10 mA | — | 531 |
| module | current -12V | 10 mA | — | 531 |

## Behavior

- Att.: when fully CCW, Attenuator mode → zero level (Attenuator) [531]
- Att.: when fully CW, Attenuator mode → max level (Attenuator) [531]
- Att.: when center, Polarizer mode → zero level (Polarizer) [531]
- Att.: when right of center → In added to offset (Polarizer) [531]
- Att.: when left of center → In subtracted from offset (Polarizer) [531]
- R5: when replaced with 200k → amplification 2 [531]
- Out: when In unpatched → offset voltage only [531]

## Sources

- [531] Doepfer A-183-2 Offset-Generator / Attenuator / Polarizer product page (product_page): https://doepfer.de/a1832.htm

Full record as JSON: https://eurorackref.com/doepfer/a-183-2.json
