# A-180-6 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-180-6/

- id: `doepfer/a-180-6`
- width: 4 HP; depth: 30 mm
- power: +12 V 10 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Multiple / Buffered Mult

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Input 1 | audio, cv | buffer input | not stated | not stated | — | 2049 |
| Input 2 | audio, cv | buffer input | not stated | not stated | Input 1 | 2049 |
| Input 3 | audio, cv | buffer input | not stated | not stated | Input 2 | 2049 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Output 1 | audio, cv | buffered output | not stated | not stated | Unit 1 | 2049 |
| Output 2 | audio, cv | buffered output | not stated | not stated | Unit 2 | 2049 |
| Output 3 | audio, cv | buffered output | not stated | not stated | Unit 3 | 2049 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Level 1 | knob | output level | — | Unit 1, Output 1 | 2049 |
| Level 2 | knob | output level | — | Unit 2, Output 2 | 2049 |
| Level 3 | knob | output level | — | Unit 3, Output 3 | 2049 |
| Gain solder bridge | jumper | maximum amplification | — | Unit 1, Unit 2, Unit 3 | 2049 |
| Input 2 normal bridge | jumper | Input 2 normal source | — | Input 2 | 2049 |
| Input 1 +5V jumper | jumper | Input 1 +5V normal | — | Input 1 | 2049 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Unit | maximum amplification | 1 x | factory setting | 2049 |
| Unit | maximum amplification | 2 x | solder bridge installed | 2049 |
| Output | CV source range | 0 to 5 V | +5V normal, gain 1 | 2049 |
| Output | CV source range | 0 to 10 V | +5V normal, gain 2 | 2049 |
| module | width | 4 HP | — | 2049 |
| module | depth | 30 mm | — | 2049 |
| module | +12V current | 10 mA | — | 2049 |
| module | -12V current | 10 mA | — | 2049 |

## Behavior

- Input 2: when unpatched → Input 1 signal used [2049]
- Input 3: when unpatched → Input 2 signal used [2049]
- Input 1: when unpatched, +5V jumper installed → +5V used: CV source [2049]
- Level 1: when Input 2 bridge altered, 2/3 unpatched → also sets Units 2, 3 [2049]
- Input 2: when normal bridge altered, unpatched → Unit 1 output used [2049]

## Sources

- [2049] Doepfer A-180-6 product page (product_page): https://doepfer.de/a1806.htm

Full record as JSON: https://eurorackref.com/doepfer/a-180-6.json
