# A-156 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-156/

- id: `doepfer/a-156`
- width: 8 HP; depth: 55 mm
- power: +12 V 50 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Quantizer

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV In 1 | cv, pitch | CV to be quantized | 0 to 10 V | unipolar | — | 1838 |
| Trig. In 1 | trigger, clock | quantization trigger | unknown | unknown | — | 1838 |
| CV In 2 | cv, pitch | CV to be quantized | 0 to 10 V | unipolar | — | 1838 |
| Trig. In 2 | trigger, clock | quantization trigger | unknown | unknown | — | 1838 |
| Transpose CV 1+2 | cv, pitch | transpose both quantizers | 0 to 10 V | unipolar | — | 1838 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV Out 1 | cv, pitch | quantized CV | 0 to 10 V | unipolar | Quantizer 1 | 1838 |
| Trig. Out 1 | trigger | quantization trigger out | not stated | unknown | Quantizer 1 | 1838 |
| CV Out 2 | cv, pitch | quantized CV | 0 to 10 V | unipolar | Quantizer 2 | 1838 |
| Trig. Out 2 | trigger | quantization trigger out | not stated | unknown | Quantizer 2 | 1838 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Scale type switch | switch | scale type | — | Quantizer 2 | 1838 |
| Mode switch | switch | output mode | — | Quantizer 2 | 1838 |
| Sixth/seventh switch | switch | added sixth or seventh | — | Quantizer 2 | 1838 |
| J1 | jumper | quantizer 1 grid | — | Quantizer 1 | 1839 |

## Modes

- Chromatic (Scale type switch = All) [1838]
- Major scale (Mode switch = Scale) [1838]
- Minor scale (Mode switch = Scale) [1838]
- Major chord (Mode switch = Chord) [1838]
- Minor chord (Mode switch = Chord) [1838]
- Fundamental + fifth (Mode switch = Quint) [1838]
- Quantizer 1 semitone (J1 = lower) [1839]
- Quantizer 1 follows switches (J1 = upper) [1839]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1839 |
| module | depth | 55 mm | — | 1839 |
| module | +12V current | 50 mA | — | 1839 |
| module | -12V current | 10 mA | — | 1839 |
| CV In | input range | 0 to 10 V | — | 1838 |
| CV Out | output range | 0 to 10 V | — | 1838 |
| Quantizer 1 | step | 0.0833 V | semitone grid | 1838 |
| quantizers | internal quantizing rate | 500 Hz | Trig. In unpatched | 1838 |
| Trig. In | scan rate | 1000 Hz | — | 1838 |
| Trig. In | max trigger frequency | 500 Hz | — | 1838 |
| Trig. Out | pulse width | 10 ms | — | 1838 |
| Trig. Out | retrigger pulse | 5 ms | new trigger within 10 ms | 1838 |

## Behavior

- Trig. In: when unpatched → continuous quantization ~500Hz [1838]
- Trig. In: when low/high transition → quantization occurs [1838]
- Trig. Out: when output voltage changes → 10 ms pulse [1838]
- Trig. Out: when new trigger within 10ms → 5 ms pulse, then 10 ms [1838]
- Transpose CV 1+2: when +1.0 V applied → both outputs up one octave [1838]
- Transpose CV 1+2: when only transpose changes → no new quantization [1839]
- CV Out: when input + transpose >10V → stops at +10V [1838]
- Mode switch: when Scale type at All → no function [1838]
- Sixth/seventh switch: when Scale type at All → no function [1838]
- Sixth/seventh switch: when Mode switch at Scale → no function [1838]
- Quantizer 1: when J1 lower (factory) → semitone grid [1839]
- Quantizer 1: when J1 upper → follows the 3 switches [1839]
- JP3: when normal operation → no jumper installed [1839]

## Sources

- [1838] Doepfer A-156 manual (manual): https://doepfer.de/a100_man/A156_man.pdf
- [1839] Doepfer A-156 product page (product_page): https://doepfer.de/a156.htm

Full record as JSON: https://eurorackref.com/doepfer/a-156.json
