# A-151 Quad Sequential Switch (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-151/

- id: `doepfer/a-151`
- width: 4 HP; depth: 35 mm
- power: +12 V 20 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: Sequential / Voltage Switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trig. In | trigger, clock | trigger pulse input | not stated | unknown | not stated | 527 |
| Res. In | trigger | reset pulse input | not stated | unknown | not stated | 527 |

## Bidirectional jacks

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| O/I | audio, cv, gate, trigger, clock | common out / input | -12 to 12 V | unknown | not stated | 527 |
| I/O 1 | audio, cv, gate, trigger, clock | in / output 1 | -12 to 12 V | unknown | — | 527 |
| I/O 2 | audio, cv, gate, trigger, clock | in / output 2 | -12 to 12 V | unknown | — | 527 |
| I/O 3 | audio, cv, gate, trigger, clock | in / output 3 | -12 to 12 V | unknown | — | 527 |
| I/O 4 | audio, cv, gate, trigger, clock | in / output 4 | -12 to 12 V | unknown | — | 527 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Steps | switch | limits number of steps | — | Sequential switch, I/O 3, I/O 4 | 527 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| O/I and I/O | signal range | -12 to 12 V | version 2 (from 2005) | 528 |
| O/I and I/O | signal range | -8 to 8 V | version 1 | 527 |
| Steps | step count | 2 to 4 steps | — | 527 |
| O/I line | protection resistor | 1000 ohm | — | 528 |
| module | width | 4 HP | — | 528 |
| module | depth | 35 mm | — | 528 |
| module | current +12V | 20 mA | — | 528 |
| module | current -12V | 10 mA | — | 528 |

## Behavior

- Trig. In: when rising edge → advance to next I/O [527]
- Sequential switch: when trigger after fourth I/O → return to I/O 1 [527]
- Res. In: when rising edge → immediately connect I/O 1 [527]
- Steps: when set to 2 or 3 → fewer addressed in/outputs [527]
- Trig. In: when very fast triggers → audio-frequency modulation results [527]
- O/I and I/O: when beyond ±8 V, version 1 → module malfunctions [527]
- O/I: when switching VCO pitch CV → small detuning from 1k resistor [528]

## Sources

- [527] Doepfer A-151 Quad Sequential Switch manual (English) (manual): https://doepfer.de/a100_man/A151_man.pdf
- [528] Doepfer A-151 Quad Sequential Switch product page (product_page): https://doepfer.de/a151.htm

Full record as JSON: https://eurorackref.com/doepfer/a-151.json
