# A-145 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-145/

- id: `doepfer/a-145`
- width: 8 HP; depth: 55 mm
- power: +12 V 30 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: LFO, Simultaneous Waveform Outputs, Oscillator Sync

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Reset In | trigger, gate | synchronisation input | unknown | unknown | — | 1832 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Inverted Sawtooth Out | cv | inverted sawtooth | -4 to 4 V | bipolar | LFO | 1832 |
| Sawtooth Out | cv | sawtooth | -4 to 4 V | bipolar | LFO | 1832 |
| Sine Out | cv | sine wave | -4 to 4 V | bipolar | LFO | 1832 |
| Triangle Out | cv | triangle | -4 to 4 V | bipolar | LFO | 1832 |
| Square Out | cv | square wave | -4 to 4 V | bipolar | LFO | 1832 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Frequ. | knob | frequency control | — | LFO | 1831 |
| Frequ. Range | switch | frequency range select | — | LFO, Frequ. | 1831 |

## Modes

- L (Frequ. Range = L) [1832]
- M (Frequ. Range = M) [1832]
- H (Frequ. Range = H) [1832]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1832 |
| module | depth | 55 mm | — | 1832 |
| module | +12V current | 30 mA | — | 1832 |
| module | -12V current | 20 mA | — | 1832 |
| LFO | frequency | 10 to 4500 Hz | Range H | 1832 |
| LFO | frequency | 0.1 to 50 Hz | Range M | 1832 |
| LFO | frequency | 0.005 to 5 Hz | Range L | 1832 |
| LFO | period | 210 s | Range L, slowest | 1832 |
| outputs | output level | 8 Vpp | — | 1832 |
| outputs | amplitude | -2.5 to 2.5 V | as stated in manual | 1831 |
| LEDs | flicker limit | 15 Hz | — | 1831 |

## Behavior

- Reset In: when rising edge → triangle resets to 0V [1832]
- Reset In: when after reset → triangle starts rising slope [1832]
- LFO: when Reset In unpatched → free running [1831]
- LEDs: when frequency above ~15 Hz → appear permanently on [1831]

## Sources

- [1831] Doepfer A-145 manual (manual): https://doepfer.de/a100_man/A145_man.pdf
- [1832] Doepfer A-145 product page (product_page): https://doepfer.de/a145.htm

Full record as JSON: https://eurorackref.com/doepfer/a-145.json
