# A-145-4 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-145-4/

- id: `doepfer/a-145-4`
- width: 4 HP; depth: 30 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: LFO, Simultaneous Waveform Outputs

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Triangle Out 1 | cv | triangle output | -5 to 5 V | bipolar | LFO 1 | 1692 |
| Rectangle Out 1 | cv | rectangle output | -5 to 5 V | bipolar | LFO 1 | 1692 |
| Triangle Out 2 | cv | triangle output | -5 to 5 V | bipolar | LFO 2 | 1692 |
| Rectangle Out 2 | cv | rectangle output | -5 to 5 V | bipolar | LFO 2 | 1692 |
| Triangle Out 3 | cv | triangle output | -5 to 5 V | bipolar | LFO 3 | 1692 |
| Rectangle Out 3 | cv | rectangle output | -5 to 5 V | bipolar | LFO 3 | 1692 |
| Triangle Out 4 | cv | triangle output | -5 to 5 V | bipolar | LFO 4 | 1692 |
| Rectangle Out 4 | cv | rectangle output | -5 to 5 V | bipolar | LFO 4 | 1692 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Frequency 1 | knob | LFO frequency | — | LFO 1 | 1692 |
| Range jumper 1 | jumper | frequency range | — | LFO 1 | 1692 |
| Frequency 2 | knob | LFO frequency | — | LFO 2 | 1692 |
| Range jumper 2 | jumper | frequency range | — | LFO 2 | 1692 |
| Frequency 3 | knob | LFO frequency | — | LFO 3 | 1692 |
| Range jumper 3 | jumper | frequency range | — | LFO 3 | 1692 |
| Frequency 4 | knob | LFO frequency | — | LFO 4 | 1692 |
| Range jumper 4 | jumper | frequency range | — | LFO 4 | 1692 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1692 |
| module | depth | 30 mm | — | 1692 |
| module | +12V current | 30 mA | — | 1692 |
| module | -12V current | 30 mA | — | 1692 |
| LFO | frequency range | 0.1 to 50 Hz | range jumper removed | 1692 |
| LFO | frequency range | 0.004 to 2 Hz | range jumper installed | 1692 |
| outputs | output level | 10 Vpp | — | 1692 |

## Behavior

- LED: when triangle output positive → lights red [1692]
- LED: when triangle output negative → lights yellow [1692]
- LFO range: when jumper removed → about 0.1-50 Hz [1692]
- LFO range: when jumper installed → about 0.004-2 Hz [1692]

## Sources

- [1692] Doepfer A-145-4 product page (product_page): https://doepfer.de/a1454.htm

Full record as JSON: https://eurorackref.com/doepfer/a-145-4.json
