# A-137-2 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-137-2/

- id: `doepfer/a-137-2`
- width: 14 HP; depth: 50 mm
- power: +12 V 30 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Chorus / Flanger / Phaser

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio In | audio | audio input | not stated | not stated | — | 513 |
| CV Shift In 1 | cv | shift control voltage | not stated | not stated | — | 513 |
| CV Shift In 2 | cv | shift control voltage | not stated | not stated | — | 513 |
| CV Shift In 3 | cv | shift control voltage | not stated | not stated | — | 513 |
| CV Shift In 4 | cv | shift control voltage | not stated | not stated | — | 513 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out | audio | original plus shifted sum | not stated | not stated | Summing | 513 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Audio In Level | knob | input level attenuator | — | Audio In | 513 |
| Manual Shift 1 | knob | manual shift control | — | Shift circuit 1 | 513 |
| CV Shift 1 | knob | shift CV attenuator | — | CV Shift In 1, Shift circuit 1 | 513 |
| Manual Shift 2 | knob | manual shift control | — | Shift circuit 2 | 513 |
| CV Shift 2 | knob | shift CV attenuator | — | CV Shift In 2, Shift circuit 2 | 513 |
| Manual Shift 3 | knob | manual shift control | — | Shift circuit 3 | 513 |
| CV Shift 3 | knob | shift CV attenuator | — | CV Shift In 3, Shift circuit 3 | 513 |
| Manual Shift 4 | knob | manual shift control | — | Shift circuit 4 | 513 |
| CV Shift 4 | knob | shift CV attenuator | — | CV Shift In 4, Shift circuit 4 | 513 |
| Summing jumpers | jumper | summing on/off per signal | — | Summing | 512 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 14 HP | — | 513 |
| module | depth | 50 mm | — | 513 |
| module | current +12V | 30 mA | — | 513 |
| module | current -12V | 20 mA | — | 513 |
| module | shifted copies | 4 count | — | 513 |
| module | internal pin outputs | 8 count | — | 512 |

## Behavior

- Shift circuit: when input is rectangle/pulse → phase shift does not work [513]
- Shift circuit: when input sawtooth, triangle, sine → phase-shifted copy produced [513]
- Audio In Level: when set for correct level relation → proper summation of signals [513]
- Summing jumpers: when jumper removed → that signal excluded from sum [512]

## Sources

- [512] Doepfer A-137-2 Wave Multiplier II Appendix (manual): https://doepfer.de/a100_man/A137_2_appendix.pdf
- [513] Doepfer A-137-2 product page (product_page): https://doepfer.de/a1372.htm

Full record as JSON: https://eurorackref.com/doepfer/a-137-2.json
