# A-132-3 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-132-3/

- id: `doepfer/a-132-3`
- width: 8 HP; depth: 50 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: VCA, Exponential / Linear VCA Response

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| In 1 | audio, cv | signal input | -8 to 8 V | unknown | not stated | 1827 |
| CV 1 | cv | gain control voltage | not stated | unknown | not stated | 1827 |
| In 2 | audio, cv | signal input | -8 to 8 V | unknown | not stated | 1827 |
| CV 2 | cv | gain control voltage | not stated | unknown | not stated | 1827 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out 1 | audio, cv | VCA output | -10 to 10 V | unknown | VCA 1 | 1827 |
| Out 2 | audio, cv | VCA output | -10 to 10 V | unknown | VCA 2 | 1827 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Gain 1 | knob | manual gain | 0 to 10 | VCA 1 | 1827 |
| CV attenuator 1 | knob | CV attenuation | — | CV 1 | 1827 |
| Lin/Exp 1 | switch | control scale | — | VCA 1 | 1827 |
| Gain 2 | knob | manual gain | 0 to 10 | VCA 2 | 1827 |
| CV attenuator 2 | knob | CV attenuation | — | CV 2 | 1827 |
| Lin/Exp 2 | switch | control scale | — | VCA 2 | 1827 |

## Modes

- linear (Lin/Exp = linear) [1827]
- exponential (Lin/Exp = exponential) [1827]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1827 |
| module | width | 40.3 mm | — | 1827 |
| module | depth | 50 mm | — | 1827 |
| module | +12V current | 30 mA | — | 1827 |
| module | -12V current | 30 mA | — | 1827 |
| In | undistorted input level | 16 Vpp | — | 1827 |
| Out | output swing limit | -10 to 10 V | SSM2164 version | 1827 |
| VCA | max gain | 1 x | CEM/AS3360 version | 1827 |
| Gain | unity gain position | 8 scale | — | 1827 |

## Behavior

- VCA (CEM/AS3360): when CV increased past unity → gain stays at 1 [1827]
- VCA (SSM2164): when CV increased past unity → gain exceeds 1 [1827]
- Out (SSM2164): when high gain and input → clips near ±10V [1827]
- Gain: when position 8 (3 o'clock) → unity gain, both modes [1827]
- In: when signal above 16 Vpp → distortion; use external attenuator [1827]

## Sources

- [1827] Doepfer A-132-3 product page (product_page): https://doepfer.de/a1323.htm

Full record as JSON: https://eurorackref.com/doepfer/a-132-3.json
