# A-130-3 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-130-3/

- id: `doepfer/a-130-3`
- width: 22 HP; depth: 50 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: VCA, Exponential / Linear VCA Response

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV 1 | cv | VCA control voltage | not stated | not stated | — | 2052 |
| In 1 | audio, cv | signal input | -8 to 8 V | not stated | — | 2052 |
| CV 2 | cv | VCA control voltage | not stated | not stated | — | 2052 |
| In 2 | audio, cv | signal input | -8 to 8 V | not stated | — | 2052 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out 1 | audio, cv | signal output | not stated | not stated | VCA 1 | 2052 |
| Out 2 | audio, cv | signal output | not stated | not stated | VCA 2 | 2052 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Gain 1 | knob | initial gain | 0 to 1 gain | VCA 1 | 2052 |
| CV 1 (attenuator) | knob | CV input attenuator | — | CV 1 | 2052 |
| lin/exp 1 | switch | VCA characteristic | — | VCA 1 | 2052 |
| Gain 2 | knob | initial gain | 0 to 1 gain | VCA 2 | 2052 |
| CV 2 (attenuator) | knob | CV input attenuator | — | CV 2 | 2052 |
| lin/exp 2 | switch | VCA characteristic | — | VCA 2 | 2052 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 22 HP | — | 1988 |
| module | width | 111.4 mm | — | 1988 |
| module | height | 1 U | — | 1988 |
| module | depth | 50 mm | — | 1988 |
| module | +12V current | 30 mA | — | 1988 |
| module | -12V current | 30 mA | — | 1988 |
| VCA | amplification range | 0 to 1 gain | — | 2052 |
| VCA | maximum gain | 0 dB | — | 2052 |
| CV input | voltage for max gain | 5 V | CV knob CW, Gain CCW | 2052 |
| In | max undistorted level | 16 Vpp | — | 2052 |

## Behavior

- VCA gain: when control voltage raised further → clips at 1 [2052]
- lin/exp switch: when center position → VCA muted [2052]
- In: when signal above 16Vpp → external attenuator recommended [2052]

## Sources

- [1988] Doepfer A-130-3 product page (product_page): https://www.doepfer.de/a1303.htm
- [2052] Doepfer A-130-2 product page (functions shared with the A-130-3) (product_page): https://doepfer.de/a1302.htm

Full record as JSON: https://eurorackref.com/doepfer/a-130-3.json
