# A-130-2 Dual VCA (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-130-2/

- id: `doepfer/a-130-2`
- width: 4 HP; depth: 50 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: VCA, Exponential / Linear VCA Response

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV 1 | cv | VCA control voltage | not stated | not stated | — | 1014 |
| In 1 | audio, cv | signal input | -8 to 8 V | not stated | — | 1014 |
| CV 2 | cv | VCA control voltage | not stated | not stated | — | 1014 |
| In 2 | audio, cv | signal input | -8 to 8 V | not stated | — | 1014 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out 1 | audio, cv | signal output | not stated | not stated | VCA 1 | 1014 |
| Out 2 | audio, cv | signal output | not stated | not stated | VCA 2 | 1014 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Gain 1 | knob | initial gain | 0 to 1 gain | VCA 1 | 1014 |
| CV 1 (attenuator) | knob | CV input attenuator | — | CV 1 | 1014 |
| lin/exp 1 | switch | VCA characteristic | — | VCA 1 | 1014 |
| Gain 2 | knob | initial gain | 0 to 1 gain | VCA 2 | 1014 |
| CV 2 (attenuator) | knob | CV input attenuator | — | CV 2 | 1014 |
| lin/exp 2 | switch | VCA characteristic | — | VCA 2 | 1014 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| VCA | amplification range | 0 to 1 gain | — | 1014 |
| VCA | maximum gain | 0 dB | — | 1014 |
| CV input | voltage for max gain | 5 V | CV knob CW, Gain CCW | 1014 |
| In | max undistorted level | 16 Vpp | — | 1014 |
| module | width | 4 HP | — | 1014 |
| module | depth | 50 mm | — | 1014 |
| module | current +12V | 30 mA | — | 1014 |
| module | current -12V | 30 mA | — | 1014 |

## Behavior

- VCA gain: when control voltage raised further → clips at 1 [1014]
- lin/exp switch: when center position → VCA muted [1014]
- In: when signal above 16Vpp → external attenuator recommended [1014]

## Sources

- [1014] Doepfer A-130-2 Dual VCA product/manual page (product_page): https://doepfer.de/a1302.htm

Full record as JSON: https://eurorackref.com/doepfer/a-130-2.json
