# A-126-2 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-126-2/

- id: `doepfer/a-126-2`
- width: 8 HP; depth: 60 mm
- power: +12 V 80 mA, −12 V 70 mA, +5 V ? mA
- status: current
- functions: Pitch Shifter / Frequency Shifter, Ring Modulator, Envelope Follower, VCA, Crossfader, Phase-offset outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio In | audio | frequency shifter input | not stated | unknown | not stated | 364 |
| FCV In | cv | shifting frequency CV | not stated | unknown | not stated | 364 |
| Mix CV In | cv | up/down mix CV | not stated | unknown | not stated | 364 |
| Sin (Ext. In) | audio, cv | external quadrature sine | -5 to 5 V | bipolar | internal quadrature VCO | 364 |
| Cos (Ext. In) | audio, cv | external quadrature cosine | -5 to 5 V | bipolar | internal quadrature VCO | 364 |
| VCA ext. CV | cv | output VCA control | ≤ 8 V | unknown | Squelch control output | 364 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio Out | audio | frequency shifter output | not stated | unknown | up/down crossfader, output VCA | 364 |
| Sin (Quadrature VCO Out) | audio, cv | quadrature VCO sine | -6 to 6 V | bipolar | Quadrature VCO | 364 |
| Cos (Quadrature VCO Out) | audio, cv | quadrature VCO cosine | -6 to 6 V | bipolar | Quadrature VCO | 364 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Frequ. 1 | knob | shifting frequency, coarse | 20 to 5000 Hz | Quadrature VCO | 364 |
| Frequ. 2 | knob | shifting frequency, fine | — | Quadrature VCO | 364 |
| FCV | knob | FCV In attenuator | — | FCV In, Quadrature VCO | 364 |
| Mix | knob | up/down shift mix | — | up/down crossfader, Audio Out | 364 |
| Mix CV | knob | Mix CV In attenuator | — | Mix CV In, up/down crossfader | 364 |
| Level | knob | audio input attenuator | — | Audio In, Dome filter, envelope follower | 364 |
| Squelch | knob | squelch intensity | — | output VCA, envelope follower | 364 |
| JP15 | jumper | Frequ. 1 sensitivity | — | Frequ. 1 | 363 |
| JP16 | jumper | Frequ. 2 sensitivity | — | Frequ. 2 | 363 |
| P8 | other | QVCO frequency offset trimmer | — | Quadrature VCO | 363 |
| P9 | other | QVCO frequency scale trimmer | — | Quadrature VCO | 363 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Quadrature VCO | frequency range | 20 to 5000 Hz | — | 364 |
| Quadrature VCO | frequency range | 8 octaves | — | 364 |
| Frequ. 1 / Frequ. 2 | coarse:fine ratio | 25 ratio | — | 364 |
| fine control | range | 0.33 octaves | — | 364 |
| Audio In | typical level | 1 Vpp | — | 364 |
| Sin/Cos outputs | level | 12 Vpp | — | 364 |
| Sin/Cos ext. inputs | level | 10 Vpp | — | 364 |
| VCA ext. CV | fully open from | 8 V | — | 364 |
| Dome filter | stages | 12 stages | — | 364 |
| Dome filter | 90 degree range | 50 to 14000 Hz | — | 364 |
| Dome filter | phase error | 0.3 degrees | maximum | 364 |
| Dome filter | resistor tolerance | 0.1 % | — | 364 |
| Dome filter | capacitor tolerance | 1 % | — | 364 |
| quadrature VCO feedthrough | level | -54 dB | optimal adjustment, no squelch | 364 |
| ring modulator feedthrough | adjusted level | 10 mVpp | best adjustment | 363 |
| module | width | 8 HP | — | 364 |
| module | width | 40.3 mm | — | 364 |
| module | depth | 60 mm | — | 364 |
| module | +12V current | 80 mA | — | 364 |
| module | -12V current | 70 mA | — | 364 |
| Standard Version | price | 410 EUR | — | 364 |
| Vintage Edition | price | 425 EUR | — | 364 |
| Expansion Module Standard | price | 55 EUR | — | 364 |
| Expansion Module Vintage | price | 60 EUR | — | 364 |

## Behavior

- Squelch: when fully CCW (Env.) → envelope controls output VCA [364]
- Squelch: when fully CW (open) → VCA permanently open [364]
- Mix: when fully CCW → down shift only [364]
- Mix: when fully CW → up shift only [364]
- Overload LED: when fully on → clipping/distortion occurs [364]
- Overload LED: when permanently off → input too low, noise [364]
- Level: when adjusting → LED just begins lighting [364]
- Sin/Cos ext. inputs: when plug inserted → internal VCO disconnected [364]
- VCA ext. CV: when plug inserted → squelch connection interrupted [364]
- Audio In: when DC offset present → loud sine/cosine feedthrough [364]
- very low shifts: when below 20Hz → external quadrature VCO required [364]
- non-quadrature external signals: when patched to Sin/Cos → no longer frequency shifter [364]
- supply voltages: when differ from 12.0V → readjustment may be needed [364]
- JP15/JP16: when factory setting → Frequ.1 coarse, Frequ.2 fine [363]

## Sources

- [363] Doepfer A-126-2 Voltage Controlled Frequency Shifter II Manual (manual): https://doepfer.de/a100_man/a126_2_internal.pdf
- [364] Doepfer A-126-2 product page (product_page): https://doepfer.de/a1262.htm

Full record as JSON: https://eurorackref.com/doepfer/a-126-2.json
