# A-121d Dual Multimode Filter (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-121d/

- id: `doepfer/a-121d`
- width: 8 HP; depth: 45 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Highpass Filter, Lowpass Filter, Bandpass / Notch Filter, Simultaneous Multimode Outputs, Mixer

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| In1 | audio | filter 1 audio input | not stated | not stated | not stated | 497 |
| In2 | audio | filter 2 audio input | not stated | not stated | In1 | 497 |
| FCV | cv, pitch | common frequency CV | not stated | not stated | not stated | 497 |
| DCV | cv | frequency spread CV | not stated | not stated | not stated | 497 |
| FCV1 | cv | filter 1 frequency CV | not stated | not stated | not stated | 497 |
| FCV2 | cv | filter 2 frequency CV | not stated | not stated | FCV1 | 497 |
| Mx1 | audio | mixer input 1 | not stated | not stated | B1 (bandpass 1) | 497 |
| Mx2 | audio | mixer input 2 | not stated | not stated | B2 | 497 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| MxO | audio | mixer output | not stated | not stated | mixing unit | 497 |
| H1 | audio | highpass output filter 1 | not stated | not stated | Filter 1 | 497 |
| L2 | audio | lowpass output filter 2 | not stated | not stated | Filter 2 | 497 |
| B2 | audio | bandpass output filter 2 | not stated | not stated | Filter 2 | 497 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Frequ. | knob | common frequency | — | Filter 1, Filter 2 | 497 |
| Delta | knob | frequency spread | — | Filter 1, Filter 2 | 497 |
| Q1 | knob | filter 1 resonance | — | Filter 1 | 497 |
| Q2 | knob | filter 2 resonance | — | Filter 2 | 497 |
| FCV1 | knob | FCV1 input attenuator | — | FCV1, Filter 1 | 497 |
| FCV2 | knob | FCV2 input attenuator | — | FCV2, Filter 2 | 497 |
| In 1 | knob | filter 1 input level | — | In1, Filter 1 | 497 |
| In 2 | knob | filter 2 input level | — | In2, Filter 2 | 497 |
| DCV trimmer | other | DCV sensitivity | — | DCV | 497 |
| resonance trimmers | other | enable self-oscillation | — | Filter 1, Filter 2 | 497 |
| cascade jumpers | jumper | master/slave cascading | — | MxO | 497 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| FCV | sensitivity | 1 V/oct | — | 497 |
| module | width | 8 HP | — | 497 |
| module | depth | 45 mm | — | 497 |
| module | current +12V | 30 mA | — | 497 |
| module | current -12V | 30 mA | — | 497 |

## Behavior

- Mx1: when unpatched → bandpass 1 mixed [497]
- Mx2: when unpatched → bandpass 2 mixed [497]
- In2: when unpatched → In1 signal feeds Filter 2 [497]
- FCV2: when unpatched → FCV1 signal used [497]
- resonance: when factory setting → no self-oscillation [497]
- resonance trimmers: when set for self-oscillation → usable as dual sine VCO [497]
- MxO: when module cascaded as slave → without function [497]
- Delta: when center, others neutral → frequencies about equal [497]

## Sources

- [497] Doepfer A-121d Dual Multimode Filter product page (product_page): https://doepfer.de/a121d.htm

Full record as JSON: https://eurorackref.com/doepfer/a-121d.json
