# A-111-6 Miniature Synthesizer Voice (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-111-6/

- id: `doepfer/a-111-6`
- width: 10 HP; depth: 50 mm
- power: +12 V 60 mA, −12 V 60 mA, +5 V ? mA
- status: current
- functions: Complete Voice, Analog VCO, 1V/Oct Pitch Tracking, Pulse Width Modulation, Sub Oscillator, Crossfader, Lowpass Filter, Self-Oscillating Filter, VCA, ADSR Envelope

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Mod. | cv | VCO modulation input | not stated | not stated | not stated | 715 |
| 1V/Oct. | pitch | VCO frequency CV | not stated | not stated | bus CV (jumper) | 715 |
| CV Bal. | cv | balance CV | 0 to 5 V | not stated | not stated | 715 |
| Ext. In | audio | external audio input VCA2 | not stated | not stated | suboctave f/2 | 715 |
| FM1 | cv | VCF frequency modulation | not stated | not stated | Envelope | 715 |
| FM2 | cv, pitch | VCF CV, ~1V/oct | not stated | not stated | 1V/Oct. (jumper) | 715 |
| Gate | gate | envelope gate input | 5 to 12 V | not stated | bus gate (jumper) | 715 |
| CVT | cv | envelope time CV | not stated | not stated | not stated | 715 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out | audio | audio output (VCA) | not stated | not stated | VCA | 715 |
| Envelope | cv | envelope output | ≤ 10 V | not stated | Envelope | 715 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Tune | knob | VCO tune | — | VCO | 715 |
| Oct. | switch | VCO octave range | — | VCO | 715 |
| Mod. | knob | modulation depth | — | Mod., VCO | 715 |
| Dest. | switch | modulation destination | — | Mod., VCO | 715 |
| PW | knob | rectangle pulsewidth | 0 to 100 % | VCO | 715 |
| Wave | switch | waveform added to rectangle | — | VCO, VCF | 715 |
| Bal. | knob | VCO/Ext. In balance | — | Balance unit | 715 |
| Frq. | knob | VCF cutoff frequency | — | VCF | 715 |
| FM1 | knob | FM1 / envelope depth | — | FM1, VCF | 715 |
| Res. | knob | VCF resonance | — | VCF | 715 |
| Gain | knob | VCA initial gain | — | VCA | 715 |
| VCA | switch | VCA control source | — | VCA | 715 |
| Att | knob | attack time | 1 to 5000 ms | Envelope | 715 |
| D/R | knob | decay/release time | 1 to 15000 ms | Envelope | 715 |
| Env. | switch | envelope mode | — | Envelope | 715 |
| tune range jumper | jumper | Tune range select | — | Tune | 715 |
| VCO bus CV jumper | jumper | bus CV to VCO | — | VCO | 715 |
| FM2 normalling jumper | jumper | FM2 normal to 1V/Oct. | — | FM2 | 715 |
| VCF bus CV jumper | jumper | bus CV to VCF | — | VCF | 715 |
| gate slew jumper | jumper | slew on VCA gate | — | VCA | 715 |
| bus gate jumper | jumper | bus gate to Gate | — | Gate, Envelope | 715 |
| CVT jumpers | jumper | CVT target and direction | — | CVT, Att, D/R | 715 |

## Modes

- A/D (Env. = A/D) [715]
- ADSR (Env. = ADSR) [715]
- A/R (Env. = A/R) [715]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| VCO | frequency range | 32 to 16000 Hz | — | 715 |
| VCO | 1V/oct tracking range | 32 to 4000 Hz | — | 715 |
| Tune | range | -10 to 10 semitones | jumper ±10 | 715 |
| Tune | range | -3 to 3 semitones | jumper ±3 | 715 |
| VCF | slope | 24 dB | — | 715 |
| VCF | frequency range | 10 to 20000 Hz | — | 715 |
| VCF | frequency range | 11 octaves | — | 715 |
| VCA | exponential scale range | -90 to -20 dB | — | 715 |
| VCA | linear scale range | -20 to 0 dB | — | 715 |
| Envelope | attack time | 1 to 5000 ms | without CVT | 715 |
| Envelope | decay/release time | 1 to 15000 ms | without CVT | 715 |
| Envelope | sustain level | 50 % | ADSR mode | 715 |
| Ext. In | required level | 5 Vpp | — | 715 |
| module | width | 10 HP | — | 715 |
| module | depth | 50 mm | — | 715 |
| module | current +12V | 60 mA | — | 715 |
| module | current -12V | 60 mA | — | 715 |

## Behavior

- Mod.: when Dest. center → no modulation [715]
- rectangle: when PW fully CCW or CW → rectangle off [715]
- VCF input: when always → Wave plus rectangle summed [715]
- Ext. In: when unpatched → suboctave f/2 used [715]
- FM1: when unpatched → FM1 sets envelope depth [715]
- FM2: when unpatched, jumper set → VCF tracks VCO [715]
- VCA: when VCA switch center → Gain sets level only [715]
- VCA: when gate control → hard on/off, clicks possible [715]
- gate slew jumper: when set → softer internal gate edges [715]
- Envelope: when ADSR mode → sustain fixed ~50% [715]
- Gate: when below +5V or slow → envelope not triggered correctly [715]
- bus CV jumper: when feature unused → remove to avoid FM [715]
- module: when VCO off, Res. max → sine oscillator via VCF [715]
- CVT: when patched → time ranges extended [715]

## Sources

- [715] Doepfer A-111-6 product page (primary documentation) (product_page): https://doepfer.de/A1116.htm
- [716] Doepfer A-111-6 Trimming Pots & Jumpers Supplement (manual): https://doepfer.de/a100_man/A111_6_trimming_potentiometers_and_jumpers.pdf

Full record as JSON: https://eurorackref.com/doepfer/a-111-6.json
