# A-110-2 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-110-2/

- id: `doepfer/a-110-2`
- width: 8 HP; depth: 50 mm
- power: +12 V 150 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Analog VCO, 1V/Oct Pitch Tracking, Linear FM, Oscillator Sync

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| 1V/Oct | pitch, cv | pitch control | not stated | unknown | — | 1644 |
| Lin FM | cv, audio | linear FM input | not stated | unknown | — | 1644 |
| Soft Sync | audio | soft sync input | not stated | unknown | — | 1644 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Sawtooth Out | audio | sawtooth, falling slope | not stated | unknown | sawtooth oscillator | 1644 |
| Triangle Out | audio | triangle with notch | not stated | unknown | waveform converters | 1644 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Tune | knob | manual tuning | — | sawtooth oscillator | 1644 |
| Range | switch | octave range | — | sawtooth oscillator | 1644 |
| JP2 | jumper | bus CV connection | — | 1V/Oct, sawtooth oscillator | 1644 |
| JP3 | jumper | Tune control range | — | Tune | 1644 |
| JP4 | jumper | Lin FM coupling | — | Lin FM | 1644 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 1644 |
| module | depth | 50 mm | — | 1644 |
| module | +12V current | 150 mA | heat-up period | 1644 |
| module | +12V current | 60 mA | long-term | 1644 |
| module | -12V current | 30 mA | — | 1644 |
| heater | heat-up period | 30 s | — | 1644 |
| Tune | range | 4 octaves | JP3 installed | 1644 |
| Tune | range | 0.5 octaves | JP3 not installed | 1644 |
| Range | positions | 3 positions | — | 1644 |

## Behavior

- 1V/Oct: when cable inserted → bus CV not interrupted [1644]
- bus CV: when JP2 removed → disconnected from VCO [1644]
- Tune: when JP3 installed → about 4 octaves range [1644]
- Tune: when JP3 not installed → about 1/2 octave range [1644]
- Lin FM: when JP4 installed → DC coupled [1644]
- Lin FM: when JP4 not installed → AC coupled [1644]

## Sources

- [1644] Doepfer A-110-2 product page (product_page): https://doepfer.de/a1102.htm

Full record as JSON: https://eurorackref.com/doepfer/a-110-2.json
