# A-101-2 (Doepfer)

Canonical page: https://eurorackref.com/doepfer/a-101-2/

- id: `doepfer/a-101-2`
- width: 8 HP; depth: 50 mm
- power: +12 V 20 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Lowpass Gate, Lowpass Filter, VCA, Vactrol, Self-Oscillating Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| CV In 1 | cv | frequency/loudness CV 1 | not stated | unknown | — | 438 |
| CV In 2 | cv | frequency/loudness CV 2 | not stated | unknown | — | 438 |
| Audio In | audio | audio input | not stated | unknown | — | 438 |
| G1 | gate | function control gate 1 | 0 to 12 V | unknown | — | 438 |
| G2 | gate | function control gate 2 | 0 to 12 V | unknown | — | 438 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio Out | audio | audio output | not stated | unknown | Low Pass Gate | 438 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| F/A | knob | manual frequency/loudness | — | low pass filter, VCA | 438 |
| CV2 | knob | CV In 2 attenuator | — | CV In 2 | 438 |
| Level | knob | audio input attenuator | — | Audio In | 438 |
| Resonance | knob | resonance control | — | low pass filter | 438 |
| Function | switch | mode toggle | — | Low Pass Gate, G1, G2 | 438 |
| LED | other | vactrol illumination display | — | F/A | 438 |

## Modes

- low pass (Function = LP) [438]
- low pass+VCA (Function = L+V/Ext.) [438]
- VCA (Function = VCA) [438]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| low pass filter | slope | 12 dB/oct | — | 438 |
| low pass filter | lowest frequency | 50 Hz | — | 439 |
| G1/G2 | low level | 0 to 2 V | — | 438 |
| G1/G2 | high level | 3 to 12 V | — | 438 |
| Level | distortion onset position | 5 dial | — | 438 |
| module | width | 8 HP | — | 439 |
| module | depth | 50 mm | — | 439 |
| module | current +12V | 20 mA | — | 439 |
| module | current -12V | 20 mA | — | 439 |

## Behavior

- G1/G2: when switch not L+V/Ext. → gate inputs not used [438]
- G1 high, G2 low: when switch at L+V/Ext. → low pass mode [438]
- G1 low, G2 low: when switch at L+V/Ext. → low pass+VCA mode [438]
- G1 low, G2 high: when switch at L+V/Ext. → VCA mode [438]
- VCA: when F/A at minimum → signal not fully attenuated (VCA) [439]
- CV inputs: when fast envelopes or audio FM → vactrols cannot follow [438]
- Level: when above about 5 → distortion appears [438]
- Audio In distortion: when VCA or LP+VCA mode → smaller than low pass [438]
- Resonance: when fully counterclockwise → original Buchla sound [438]
- Resonance: when increased → audio level increases [439]
- low pass+VCA: when loudness decreases → sound becomes duller (low pass+VCA) [438]

## Sources

- [438] Doepfer A-101-2 Vactrol Low Pass Gate Manual (manual): https://doepfer.de/a100_man/a1012_man.pdf
- [439] Doepfer A-101-2 product page (product_page): https://doepfer.de/a1012.htm

Full record as JSON: https://eurorackref.com/doepfer/a-101-2.json
