# Chaos (CLANK)

Canonical page: https://eurorackref.com/clank/chaos/

- id: `clank/chaos`
- width: 12 HP; depth: unknown mm
- power: +12 V 115 mA, −12 V 0 mA, +5 V 0 mA
- status: current
- functions: Random / Sample & Hold CV, Step Sequencer, Trigger / Euclidean Sequencer, Master Clock, Clock Divider / Multiplier, Tempo / Clock Sync, Quantizer, Slew Limiter, Probability / Bernoulli Gate, CV Recorder / Gesture Looper

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Clock in | gate, trigger, clock | external clock input | not stated | unknown | — | 949 |
| Loop in | gate, trigger | loop start/stop or reset | 0 to 10 V | unknown | — | 949 |
| CV in | cv | external CV input | 0 to 8 V | unipolar | — | 949 |
| Chaos in | gate, trigger | Chaos function trigger | not stated | unknown | — | 949 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Clock out | gate, clock | master clock output | 0 to 8 V | unknown | master clock | 949 |
| Ch. Gate out 1 | gate, trigger | channel 1 gate | 0 to 8 V | unknown | Channel 1 | 950 |
| Ch. Gate out 2 | gate, trigger | channel 2 gate | 0 to 8 V | unknown | Channel 2 | 950 |
| Ch. Gate out 3 | gate, trigger | channel 3 gate | 0 to 8 V | unknown | Channel 3 | 950 |
| Ch. Gate out 4 | gate, trigger | channel 4 gate | 0 to 8 V | unknown | Channel 4 | 950 |
| Ch. Gate out 5 | gate, trigger | channel 5 gate | 0 to 8 V | unknown | Channel 5 | 950 |
| Ch. Gate out 6 | gate, trigger | channel 6 gate | 0 to 8 V | unknown | Channel 6 | 950 |
| Ch. CV out 1 | cv, pitch | channel 1 CV | 0 to 8 V | unipolar | Channel 1 | 951 |
| Ch. CV out 2 | cv, pitch | channel 2 CV | 0 to 8 V | unipolar | Channel 2 | 951 |
| Ch. CV out 3 | cv, pitch | channel 3 CV | 0 to 8 V | unipolar | Channel 3 | 951 |
| Ch. CV out 4 | cv, pitch | channel 4 CV | 0 to 8 V | unipolar | Channel 4 | 951 |
| Ch. CV out 5 | cv, pitch | channel 5 CV | 0 to 8 V | unipolar | Channel 5 | 951 |
| Ch. CV out 6 | cv, pitch | channel 6 CV | 0 to 8 V | unipolar | Channel 6 | 951 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| encoder | other | channel select, value edit | — | all parameters | 951 |
| Probability | button | gate probability modifier | 0 to 100 % | channel gate | 949 |
| Width | button | gate width modifier | 1 to 100 % | channel gate | 949 |
| Time | button | clock mult/div or ms | — | channel timing | 949 |
| Voltage window | button | CV range upper limit | — | random voltage generators | 949 |
| Ground transpose | button | CV range lower limit | — | random voltage generators | 949 |
| loop button | button | channel loop on/off | — | loop | 951 |
| input assign button | button | input links per channel | — | Clock in, Loop in, CV in, Chaos in | 951 |
| quant / slew button | button | slew and scale select | — | slew, quantizer | 951 |
| save & recall button | button | memory save/recall | — | save/recall | 951 |

## Modes

- random mode [949]
- loop mode (loop button = press) [949]
- Edit Mode [949]
- synced [949]
- unsynced [949]
- CV IN sample & hold [949]
- CV IN transpose [949]
- CV IN slot recall [949]
- calibration [949]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| master clock | period range | 10 to 10000 ms | — | 949 |
| unsynced time | default period | 500 ms | unsynced | 949 |
| unsynced time | default tempo | 120 BPM | unsynced | 949 |
| gates | max rate approx | 100 Hz | — | 949 |
| gates | slowest rate | 5.5 min | — | 949 |
| Probability | range | 0 to 100 % | — | 949 |
| Width | range | 1 to 100 % | — | 949 |
| Time | mult/div range | 1 to 8 ratio | synced | 949 |
| Time | extended mult/div | 16 to 32 ratio | synced | 949 |
| Time | LED step, first window | 100 ms | unsynced | 949 |
| Time | LED step, second window | 1 s | unsynced | 949 |
| Racheting | range | 1 to 8 ratio | — | 949 |
| Swing | max offset | 0 to 0.75 fraction of clock | — | 949 |
| random voltage | range | 0 to 8 V | — | 949 |
| value bar | per LED | 1 V | — | 949 |
| slew | amount | ≤ 100 % of step | — | 949 |
| loop | length | 1 to 32 steps | — | 949 |
| save/recall | slots | 10 slots | — | 949 |
| CV in slot recall | CV range | 0 to 5 V | slot recall mode | 949 |
| CV in slot recall | step per slot | 0.5 V | slot recall mode | 949 |
| Root note | step per detent | 1 semitones | — | 949 |
| Ground transpose | step per detent | 1 semitones | quantized | 949 |
| quantizer | scales, first set | 10 scales | — | 949 |
| quantizer | scales, second set | 7 scales | — | 949 |
| quantizer | scales, third set | 7 scales | — | 949 |
| calibration | reference output | 8 V | — | 949 |
| module | width | 12 HP | — | 949 |
| power | +12 V current | 115 mA | — | 949 |
| power | -12 V current | 0 mA | — | 949 |
| power | +5 V current | 0 mA | — | 949 |
| operating temperature | range | 0 to 50 °C | — | 949 |

## Behavior

- Channel 1: when Clock in unpatched → acts as master clock [949]
- master clock: when external clock stops → Chaos stops [949]
- Ch1 probability: when Ch1 is master clock → master stream unaffected [949]
- Probability: when set to 0% → channel muted / pause [949]
- Width: when racheting applied → gate length halved [949]
- Channel 1: when muted while master → whole system stops [949]
- channel: when gate rises → new random CV [949]
- slewing: when CV IN sample mode → not applied [949]
- modifiers: when CV IN sample mode → work as random [949]
- loop parameters: when changed before looping → recorded and played back [949]
- loop probability: when in loop mode → capped at original value [949]
- loop voltage window: when in loop mode → can only decrease [949]
- original parameters: when changed in loop mode → loop values unaffected [949]
- Loop in: when input assign LED green → gate toggles loop [949]
- Loop in: when input assign LED red → gate restarts loop [949]
- Chaos in: when channel linked → gate randomizes modifiers [949]
- modifier entropy: when set individually → overrides channel entropy [949]
- Edit Mode: when loop length increased → new steps clone last [949]
- Edit Mode: when loop length decreased → steps erased [949]
- Ratchets: when within one step → voltage unchanged [949]
- CV in slot recall: when active → overrides other channels CV IN [949]
- startup: when saved slots present → last slot recalled [949]
- recall: when empty slot → no effect [949]
- paste: when after each paste → memory buffer erased [949]
- channel reset: when all channels selected → all channels reset [949]
- firmware v1.0 to v1.1: when upgrading → EEPROM erase mandatory [949]
- Edit Mode: when entered → channel must be looped [949]

## Sources

- [949] CLANK Chaos User Manual v1.17b (manual): https://www.clank.eu/s/Chaos-Manual-v117b.pdf
- [950] CLANK Chaos Quickstart v1.1 (manual): https://www.clank.eu/s/Chaos-Quickstart-v1_1-zl23.pdf
- [951] CLANK Chaos product page (product_page): https://www.clank.eu/chaos

Full record as JSON: https://eurorackref.com/clank/chaos.json
