# MIG VCF (Catalyst Audio)

Canonical page: https://eurorackref.com/catalyst-audio/mig-vcf/

- id: `catalyst-audio/mig-vcf`
- width: 16 HP; depth: 35 mm
- power: +12 V 44 mA, −12 V 60 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| INPUT | audio | signal to filter | not stated | not stated | — | 2014 |
| DRIVE | cv | drive CV | not stated | not stated | — | 2014 |
| FREQ | cv | cutoff CV | not stated | not stated | — | 2014 |
| RES | cv | resonance CV | not stated | not stated | — | 2014 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| HIGH | audio | high-pass output | not stated | not stated | High-pass summer | 2014 |
| LOW | audio | low-pass output | not stated | not stated | Filter core | 2014 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| FREQUENCY | knob | initial cutoff | — | Filter core | 2014 |
| RESONANCE | knob | resonance amount | — | Resonance tube | 2014 |
| DRIVE | knob | tube #2 amplification | — | Drive tube, Filter core | 2014 |
| RES MODE | knob | resonance source crossfade | — | Resonance tube | 2014 |
| Drive CV attenuverter | knob | drive CV amount | — | DRIVE | 2014 |
| Freq CV attenuverter | knob | cutoff CV amount | — | FREQ | 2014 |
| Res CV attenuverter | knob | resonance CV amount | — | RES | 2014 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 16 HP | — | 2014 |
| module | depth | 35 mm | — | 2014 |
| module | +12V current | 44 mA | — | 2014 |
| module | -12V current | 60 mA | — | 2014 |
| Filter core | slope | 18 dB/oct | — | 2014 |

## Behavior

- RES MODE: when full one way → resonance fed from LP [2014]
- RES MODE: when full other way → resonance fed from HP [2014]
- CV attenuverters: when clockwise → CV added [2014]
- CV attenuverters: when counterclockwise → CV subtracted [2014]
- Filter core: when input drowns resonance pathway → no self-oscillation [2014]
- Filter core: when input level or Drive reduced → self-oscillation easier [2014]

## Sources

- [2014] Catalyst Audio MIG VCF manual (manual): https://www.catalystaudio.com/_files/ugd/069912_63e900fef4644e3d97b71c2fc63f392b.pdf
- [2015] Catalyst Audio MIG VCF product page (product_page): https://www.catalystaudio.com/migvcf

Full record as JSON: https://eurorackref.com/catalyst-audio/mig-vcf.json
