# Optx v2 (Boredbrain Music)

Canonical page: https://eurorackref.com/boredbrain/optx-v2/

- id: `boredbrain/optx-v2`
- width: 10 HP; depth: 38 mm
- power: +12 V 260 mA, −12 V 130 mA, +5 V 270 mA
- status: current
- functions: External Audio I/O

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN 1 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 2 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 3 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 4 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 5 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 6 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 7 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| IN 8 | audio, cv | analog input to ADAT | -10 to 10 V | bipolar | not stated | 1826 |
| Rx | audio, cv | ADAT optical input | not stated | unknown | — | 1826 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 2 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 3 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 4 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 5 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 6 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 7 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| OUT 8 | audio, cv | decoded ADAT channel | -10 to 10 V | bipolar | DAC, Rx | 1826 |
| Tx | audio, cv | ADAT optical output | not stated | unknown | ADC | 1826 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| AUDIO/CV 1-2 | switch | input pair conversion mode | — | IN 1, IN 2, ADC | 1826 |
| AUDIO/CV 3-4 | switch | input pair conversion mode | — | IN 3, IN 4, ADC | 1826 |
| AUDIO/CV 5-6 | switch | input pair conversion mode | — | IN 5, IN 6, ADC | 1826 |
| AUDIO/CV 7-8 | switch | input pair conversion mode | — | IN 7, IN 8, ADC | 1826 |
| SYNC | switch | sample clock source | — | sample clock | 1826 |
| RATE | switch | internal sample rate | — | sample clock | 1826 |
| +5 V jumper | jumper | +5V source select | — | — | 1826 |

## Modes

- AUDIO (AUDIO/CV switch = AUDIO) [1826]
- CV (AUDIO/CV switch = CV) [1826]
- INT (SYNC = INT) [1826]
- EXT (SYNC = EXT) [1826]
- 96 kHz S/MUX [1826]
- 192 kHz S/MUX [1826]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 10 HP | — | 1826 |
| module | depth | 38 mm | — | 1826 |
| module | weight | 113 g | — | 1826 |
| module | +12V current | 260 mA | +5V from OPTX | 1826 |
| module | -12V current | 130 mA | +5V from OPTX | 1826 |
| module | +12V current | 130 mA | +5V from CASE | 1826 |
| module | -12V current | 130 mA | +5V from CASE | 1826 |
| module | +5V current | 270 mA | +5V from CASE | 1826 |
| converters | resolution | 24 bit | — | 1826 |
| sample clock | sample rate | 44.1 kHz | RATE 44.1 | 1826 |
| sample clock | sample rate | 48 kHz | RATE 48 | 1826 |
| I/O | max level | -10 to 10 V | — | 1826 |
| I/O | max level | 20 Vpp | — | 1826 |
| inputs | SNR | ≥ 103 dB | — | 1826 |
| I/O | 10 Vpp signal level | -6 dBFS | — | 1826 |
| CV mode | self-calibration period | 5 s | — | 1826 |
| ADAT | channels | 8 count | 44.1/48 kHz | 1826 |
| ADAT | channels | 4 count | 96 kHz | 1826 |
| ADAT | channels | 2 count | 192 kHz | 1826 |

## Behavior

- input pair: when switched to CV → 5 s self-calibration [1826]
- input pair: when AUDIO mode → ADC high-pass, no DC [1826]
- EXT sync: when valid ADAT signal present → EXT SYNC LED lit [1826]
- Tx: when INT sync, no Rx → one-way ADAT output [1826]
- 96/192 kHz: when on-board clock → not supported, needs EXT [1826]
- inputs: when 96 or 192 kHz → mixed to available channels [1826]
- outputs: when 96 or 192 kHz → copies of available channels [1826]
- two Optx linked: when interconnected → one INT, one EXT [1826]
- +5 V jumper: when OPTX → +5V from +12V rail [1826]
- +5 V jumper: when CASE → uses case +5V [1826]

## Sources

- [1826] Boredbrain Music Optx v2 product page (product_page): https://www.boredbrainmusic.com/products/optx-v2/5306657000000637001

Full record as JSON: https://eurorackref.com/boredbrain/optx-v2.json
