# Gliss 1U (Bela)

Canonical page: https://eurorackref.com/bela/gliss-1u/

- id: `bela/gliss-1u`
- width: 24 HP; depth: 26 mm
- power: +12 V 150 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Manual Controller, CV Recorder / Gesture Looper, LFO, ADSR Envelope, Digital / Wavetable Oscillator, 1V/Oct Pitch Tracking, Tempo / Clock Sync, Envelope Follower, Slew Limiter, Step Sequencer, Distortion / Saturation, Unipolar/bipolar switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Input | cv, trigger, gate, clock, pitch, audio | mode-dependent input | -5 to 10 V | unknown | — | 681 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT 1 | cv, gate, audio, pitch | mode-dependent CV output | -5 to 10 V | unknown | Control Mode, Record Mode, Wavetable playback, Waveshaper playback, Signal Mode, envelope detector, Notes Mode | 681 |
| OUT 2 | cv, gate, trigger, audio | mode-dependent CV output | -5 to 10 V | unknown | Control Mode, Record Mode, Wavetable playback, Waveshaper playback, Signal Mode, envelope detector, Notes Mode | 681 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Button | button | mode-dependent; Menu navigation | — | Touch Strip, Record Mode, Signal Mode, Notes Mode | 681 |
| Touch Strip | other | position and touch size | — | OUT 1, OUT 2 | 681 |
| Mode Selector | menu_setting | next Performance Mode | — | Touch Strip | 681 |
| Voltage Range Selector | menu_setting | Input/Output voltage ranges | -5 to 10 V | Input, OUT 1, OUT 2 | 681 |
| Touch Input Type | menu_setting | touch layout select | — | Control Mode, Record Mode | 681 |
| Latching | menu_setting | hold value on release | — | Control Mode | 681 |
| Slew rate | menu_setting | attack/release slew per output | 0 to 100 s | slew rate, OUT 1, OUT 2 | 681 |
| Playback | menu_setting | gesture playback type | — | Record Mode, Wavetable playback, Waveshaper playback | 681 |
| Input signal | menu_setting | CV or audio input | — | Signal Mode, Input | 681 |
| Output type | menu_setting | output pair select | — | OUT 1, OUT 2 | 681 |
| Envelope decay | menu_setting | envelope detector smoothing | — | envelope detector | 681 |
| Play type | menu_setting | keyboard or sequencer | — | Notes Mode | 681 |
| Quantisation | menu_setting | semitone steps while tuning | — | Notes Mode | 681 |
| Variable setting | menu_setting | vibrato depth / glide | — | Notes Mode | 681 |
| Touch Sensitivity | menu_setting | touch size gain | — | Touch Strip | 681 |
| LED Brightness | menu_setting | LED brightness | — | Touch Strip | 681 |
| Toggle Menu Animations | menu_setting | menu animations on/off | — | Touch Strip | 681 |
| Module Orientation | menu_setting | reorient menus/controls | — | Touch Strip | 681 |

## Modes

- Control (Mode Selector = Control) [681]
- Record (Mode Selector = Record) [681]
- Signal (Mode Selector = Signal) [681]
- Notes (Mode Selector = Notes) [681]
- Record Loop (Playback = Loop) [681]
- Record Trigger (Playback = Trigger) [681]
- Record Clock (Playback = Clock) [681]
- Record Wavetable (Playback = Wavetable) [681]
- Record Waveshaper (Playback = Waveshaper) [681]
- Keyboard (Play type = Keyboard) [681]
- Sequencer (Play type = Sequencer) [681]
- Calibration Mode [681]
- Factory Test Mode [681]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Input/Outputs | usable range | -5 to 10 V | — | 681 |
| Input/Outputs | safe range | -10 to 10 V | — | 681 |
| Input/Outputs | default range | 0 to 10 V | — | 681 |
| Input | trigger threshold | 2 V | — | 681 |
| Record Mode | max gesture length | 150 s | Loop, Trigger, Wavetable, Waveshaper | 681 |
| Record Mode | max gesture length | 75 s | Clock playback | 681 |
| Record Mode | max gesture length | 150 s | product page | 682 |
| slew rate | slew time | 0 to 100 s | — | 681 |
| Wavetable playback | frequency at 0V input | 65.4 Hz | — | 681 |
| Wavetable playback | pitch scaling | 1 octaves per V | — | 681 |
| Notes Mode | Top Output default range | 0 to 2 V | — | 681 |
| Notes Mode | keyboard notes | 1 to 5 notes | — | 681 |
| Notes Mode | sequencer steps | 5 steps | — | 681 |
| Notes Mode | first-step trigger level | 10 V | Sequencer | 681 |
| Notes Mode | other-step trigger level | 5 V | Sequencer | 681 |
| Record Mode | loop-start sync pulse | 4 ms | Single Slider, max sensitivity | 681 |
| custom voltage range | step size | 1 V | — | 681 |
| Touch Strip | LEDs | 23 LEDs | — | 681 |
| module | width | 24 HP | — | 681 |
| Slider + Touch | slider share | 80 % | — | 681 |

## Behavior

- Control outputs: when Unlatched, finger lifted → outputs go to 0V (Control) [681]
- Control outputs: when Latched, finger lifted → last values held (Control) [681]
- Control outputs: when Latch Position, finger lifted → position held, touch 0V (Control) [681]
- Input: when trigger received → latches/unlatches values (Control) [681]
- Slew: when release below 0V → rises to 0V at slew (Control) [681]
- Slew: when default setting → zero: immediate jumps (Control) [681]
- Input: when trigger during Loop playback → restarts gesture (Record Loop) [681]
- Loop playback: when finger placed on strip → overwrites gesture (Record Loop) [681]
- Trigger playback: when GATE goes high → Attack plays, last value held (Record Trigger) [681]
- Trigger playback: when GATE goes low → Release section plays (Record Trigger) [681]
- Trigger playback: when GATE shorter than Attack → Attack then Release immediately (Record Trigger) [681]
- Clock playback: when clock rate changes → playback stretches to match (Record Clock) [681]
- Clock playback: when strip untouched during recording → existing recording persists (Record Clock) [681]
- Clock playback: when no clock connected → loops at recorded speed (Record Clock) [681]
- Waveshaper playback: when Input at range minimum → gesture beginning (Record Waveshaper) [681]
- Waveshaper playback: when Input at range maximum → gesture end (Record Waveshaper) [681]
- in/out points: when gesture overwritten or erased → reset to full gesture [681]
- loop sync gate: when Single Slider, max sensitivity → bottom output 4ms low pulse [681]
- Signal Mode: when signal outside clip points → hard clipped to range (Signal) [681]
- Signal Mode: when clip points set → clipped portion rescaled to range (Signal) [681]
- Sequencer step: when state Hold → previous note held, no trigger (Sequencer) [681]
- Sequencer step: when state Mute → 0V, no trigger (Sequencer) [681]
- Sequencer step: when state Skip → removed; sequence shortens (Sequencer) [681]
- Sequencer step: when step tapped → plays next, loop continues (Sequencer) [681]
- Sequencer step: when step held → repeats while held (Sequencer) [681]
- Input: when Control or Notes Mode → range not configurable [681]
- settings: when new firmware flashed → all settings erased [681]
- calibration: when powered off mid-calibration → not saved [681]
- Touch Sensitivity: when set to maximum → any touch gives max voltage [681]

## Sources

- [681] Bela Gliss User Manual (firmware v2) (manual): https://github.com/BelaPlatform/Gliss/blob/main/GLISS_user_manual-2.pdf?raw=true
- [682] Bela Gliss 1U product page (product_page): https://shop.bela.io/products/gliss-1u

Full record as JSON: https://eurorackref.com/bela/gliss-1u.json
