# 150 Ring Mod/Noise/S&H/LFO (Behringer)

Canonical page: https://eurorackref.com/behringer/150/

- id: `behringer/150`
- width: 16 HP; depth: 129 mm
- power: +12 V 60 mA, −12 V 50 mA, +5 V ? mA
- status: current
- functions: Ring Modulator, Noise Source, Random / Sample & Hold CV, Slew Limiter, Master Clock, LFO

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| EXT SIG X/NOISE | audio | ring mod signal input | not stated | not stated | — | 1047 |
| EXT SIG Y/LFO | audio, cv | ring mod carrier input | not stated | not stated | — | 1047 |
| EXT SIG | cv, audio | S&H signal input | not stated | not stated | — | 1047 |
| EXT CLOCK IN | clock | external S&H clock | not stated | not stated | — | 1047 |
| TRIGGER | trigger, cv | LFO amplitude reset | not stated | not stated | — | 1047 |
| FREQ CV IN | cv | LFO frequency CV | 0 to 10 V | unipolar | — | 1047 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| R.M OUT | audio | ring modulator output | not stated | not stated | ring modulator | 1047 |
| PINK 1 | audio | pink noise output | not stated | not stated | noise generator | 1047 |
| PINK 2 | audio | pink noise output | not stated | not stated | noise generator | 1047 |
| WHITE 1 | audio | white noise output | not stated | not stated | noise generator | 1047 |
| WHITE 2 | audio | white noise output | not stated | not stated | noise generator | 1047 |
| CLOCK OUT | clock | internal S&H clock output | not stated | not stated | S&H circuit | 1047 |
| S&H OUT | cv | sample & hold output | not stated | not stated | S&H circuit | 1047 |
| LFO OUT 1 | cv | LFO output | not stated | not stated | LFO | 1047 |
| LFO OUT 2 | cv | LFO output | not stated | not stated | LFO | 1047 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| EXT/LFO/NOISE | switch | EXT SIG source optimization | — | EXT SIG, S&H circuit | 1047 |
| CLOCK RATE | fader | internal clock rate | 2 to 25 Hz | S&H circuit, CLOCK OUT | 1047 |
| LAG TIME | fader | smooth CV changes | 0 to 8 s | S&H circuit, S&H OUT | 1047 |
| WAVEFORM | knob | LFO waveform select | — | LFO | 1047 |
| FREQ RANGE | switch | LFO frequency range | — | LFO | 1047 |
| FREQ | fader | LFO fine frequency | 0.03 to 30 Hz | LFO | 1047 |
| DELAY | fader | time to amplitude peak | 0.004 to 8 s | LFO | 1047 |
| OUTPUT LEVEL | switch | LFO OUT strength | — | LFO OUT 1, LFO OUT 2 | 1047 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| EXT SIG X/Y | maximum level | 20 dBu | — | 1047 |
| R.M OUT | maximum level | 15 dBu | — | 1047 |
| WHITE / PINK | output level | 0 dBu | — | 1047 |
| EXT SIG | maximum level | 17 dBu | — | 1047 |
| S&H circuit | clock rate | 2 to 25 Hz | — | 1047 |
| S&H circuit | lag time | 0 to 8 s | — | 1047 |
| LFO | frequency | 0.03 to 30 Hz | across 3 ranges | 1047 |
| LFO | delay | 0.004 to 8 s | — | 1047 |
| LFO OUT | output level | 10 V p-p | OUTPUT LEVEL x1 | 1047 |
| LFO OUT | output level | 1 V p-p | OUTPUT LEVEL x 1/10 | 1047 |
| module | current draw +12 V | 60 mA | — | 1047 |
| module | current draw -12 V | 50 mA | — | 1047 |
| module | width | 16 HP | — | 1047 |

## Behavior

- ring modulator: when X and Y patched → X modulated by Y carrier [1047]
- FREQ CV IN: when patched → replaces FREQ slider [1047]
- LFO: when TRIGGER received → amplitude resets to 0 [1047]
- LFO: when after TRIGGER reset → amplitude returns at DELAY rate [1047]
- S&H circuit: when LAG TIME raised → CV changes smoothed [1047]

## Sources

- [1047] Behringer 150 Ring Mod/Noise/S&H/LFO manual (mirror of official documentation via device.report) (manual): https://device.report/manual/547651

Full record as JSON: https://eurorackref.com/behringer/150.json
