# 1047 Multimode Filter/Resonator (Behringer)

Canonical page: https://eurorackref.com/behringer/1047/

- id: `behringer/1047`
- width: 16 HP; depth: unknown mm
- power: +12 V 55 mA, −12 V 45 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Multimode Filter, Simultaneous Multimode Outputs

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| INPUT | audio, gate | audio input | not stated | not stated | — | 768 |
| F CV 1 | cv, pitch | filter frequency CV | -10 to 10 V | bipolar | — | 768 |
| F CV 2 | cv, pitch | filter frequency CV | -10 to 10 V | bipolar | — | 768 |
| Q CV | cv | resonance CV | -10 to 10 V | bipolar | — | 768 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| LP | audio | low-pass output | not stated | not stated | State variable filter | 768 |
| HP | audio | high-pass output | not stated | not stated | State variable filter | 768 |
| NOTCH | audio | notch output | not stated | not stated | State variable filter | 768 |
| BP | audio | band-pass output | not stated | not stated | State variable filter | 768 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| COARSE | knob | filter frequency | 31 to 8000 Hz | State variable filter | 768 |
| FINE | knob | fine frequency | 0.5 to 2 x | State variable filter | 768 |
| RESONANCE (NORM/LIM) | switch | resonance limiting | — | State variable filter | 768 |
| RESONANCE (Q) | knob | filter Q | 0.5 to 256 Q | State variable filter | 768 |
| F CV 1 knob | knob | F CV 1 attenuator | — | F CV 1 | 768 |
| F CV 2 knob | knob | F CV 2 attenuator | — | F CV 2 | 768 |
| NOTCH FREQ/fc | knob | notch offset from fc | -3 to 3 octaves | NOTCH | 768 |
| INPUT knob | knob | input attenuator | — | INPUT | 768 |
| Q CV knob | knob | Q CV attenuator | — | Q CV | 768 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| COARSE | frequency range | 31 to 8000 Hz | — | 768 |
| FINE | frequency multiplier | 0.5 to 2 x | — | 768 |
| RESONANCE (Q) | Q range | 0.5 to 256 Q | max >256 | 768 |
| NOTCH FREQ/fc | offset range | -3 to 3 octaves | — | 768 |
| Filter | slope | 12 dB | — | 768 |
| INPUT | max input level | 18 dBu | — | 768 |
| Filter outputs | max output level | 18 dBu | — | 768 |
| Attenuators | gain range | ≤ 0 dB | -inf to unity | 768 |
| Module | current draw +12V | 55 mA | — | 768 |
| Module | current draw -12V | 45 mA | — | 768 |
| Module | width | 16 HP | — | 768 |

## Behavior

- RESONANCE (NORM/LIM): when LIM at high Q → prevents circuit overload [768]
- RESONANCE (NORM/LIM): when LIM in other situations → very low output [768]
- NOTCH FREQ/fc: when set to 1 → standard notch at fc [768]
- NOTCH FREQ/fc: when full CCW → NOTCH copies HP output [768]
- NOTCH FREQ/fc: when full CW → NOTCH copies LP output [768]
- Notch: when offset with higher Q → resonant peak at fc [768]
- Filter: when gate into INPUT → rings percussively [768]
- RESONANCE (Q): when high Q → resonant peaks may overload [768]

## Sources

- [768] Behringer 1047 Multimode Filter/Resonator Quick Start Guide (official QSG PDF via mirror) (manual): https://www.adorama.com/col/productManuals/BEMUFRESM147.pdf

Full record as JSON: https://eurorackref.com/behringer/1047.json
