# Slew (Befaco)

Canonical page: https://eurorackref.com/befaco/slew/

- id: `befaco/slew`
- width: 4 HP; depth: 25 mm
- power: +12 V 20 mA, −12 V 15 mA, +5 V 0 mA
- status: current
- functions: Slew Limiter, ADSR Envelope

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| SIGNAL IN | cv, pitch, gate | signal to process | -10 to 10 V | not stated | — | 1485 |
| CV IN | cv | slew time CV | 0 to 10 V | not stated | — | 1485 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| SIGNAL OUT | cv, pitch | slewed output | not stated | not stated | Slew generator | 1485 |
| RISE | gate | gate while rising | not stated | not stated | Slope detector | 1485 |
| FALL | gate | gate while falling | not stated | not stated | Slope detector | 1485 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Rise fader | fader | rise slew time | — | Slew generator | 1485 |
| Fall fader | fader | fall slew time | — | Slew generator | 1485 |
| SHAPE | knob | slew time response | — | Slew generator | 1485 |
| RANGE | switch | slew time range | — | Slew generator | 1485 |
| CV SELECTOR | switch | routes CV IN | — | CV IN, Slew generator | 1485 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1485 |
| module | width | 4 HP | — | 1486 |
| module | depth | 25 mm | assembled version | 1485 |
| module | depth | 35 mm | DIY version | 1485 |
| module | +12V current | 20 mA | — | 1485 |
| module | -12V current | 15 mA | — | 1485 |
| module | +5V current | 0 mA | — | 1485 |
| Slew generator | pitch tracking error | ≤ 1 mV | — | 1485 |
| RANGE | speed ranges | 3 ranges | — | 1485 |

## Behavior

- RISE: when output rising → gate high [1485]
- FALL: when output falling → gate high [1485]
- Rise fader: when CV patched to rise → acts as CV attenuator [1485]
- Fall fader: when CV patched to fall → acts as CV attenuator [1485]
- Rise fader: when higher fader position → longer slew time [1485]
- CV SELECTOR: when upper position → CV IN sets rise [1485]
- CV SELECTOR: when middle position → CV IN sets both [1485]
- CV SELECTOR: when lower position → CV IN sets fall [1485]
- SHAPE: when turned clockwise → farther notes slide faster [1485]
- Slope detector: when fastest settings → detects subtle movements [1485]
- Slope detector: when ghost gates appear → raise slew time [1485]
- RANGE: when leftmost position → fastest range [1485]

## Sources

- [1485] befaco Slew manual (manual): https://www.befaco.org/docs/Slew/SLEW_User_manual.pdf
- [1486] befaco Slew product page (product_page): https://www.befaco.org/slew/

Full record as JSON: https://eurorackref.com/befaco/slew.json
