# Sampling Modulator (Befaco)

Canonical page: https://eurorackref.com/befaco/sampling-modulator/

- id: `befaco/sampling-modulator`
- width: 8 HP; depth: 40 mm
- power: +12 V 48 mA, −12 V 18 mA, +5 V ? mA
- status: current
- functions: Trigger / Euclidean Sequencer, Random / Sample & Hold CV, Distortion / Saturation, Clock Divider / Multiplier, Analog VCO, 1V/Oct Pitch Tracking, Master Clock, Oscillator Sync

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio, cv | audio input to S&H | not stated | not stated | — | 197 |
| HOLD | gate | hold current sample | not stated | not stated | — | 197 |
| CLOCK | clock | external clock / sync | not stated | not stated | — | 197 |
| V/Oct input | pitch | VCO pitch CV | not stated | not stated | — | 197 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Clock output | clock | internal VCO clock | not stated | not stated | VCO | 197 |
| Trigger output | trigger | sequencer triggers | not stated | not stated | Sequencer | 197 |
| S&H output | audio, cv | sampled output | not stated | not stated | Sample and Hold | 197 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Step switch 1 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 2 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 3 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 4 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 5 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 6 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 7 | switch | step on/off/reset | — | Sequencer | 197 |
| Step switch 8 | switch | step on/off/reset | — | Sequencer | 197 |
| RATE | knob | coarse VCO rate | — | VCO | 197 |
| FINE | knob | fine VCO rate | — | VCO | 197 |
| Clock switch | switch | internal / external clock | — | VCO, Sequencer, CLOCK | 197 |

## Modes

- Sequencer Clocked Sample & Hold [197]
- Analog Down-sampling Effect [197]
- Sampling Modulator/Shaper [197]
- 8 Step Trigger Sequencer [197]
- Unusual V/Oct VCO [197]
- Clock: typical [197]
- Clock: positive going hard sync [197]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Sequencer | steps | 8 steps | — | 197 |
| V/Oct input | tracking | 4 octaves | — | 197 |
| VCO | tracking | ≥ 4 octaves | more than 4 | 197 |
| clock | max frequency | 25 kHz | without external CV | 197 |
| clock | max frequency | 200 kHz | with CV on input | 197 |
| module | width | 8 HP | — | 197 |
| module | depth | 47 mm | manual | 197 |
| module | depth | 40 mm | product page | 198 |
| module | current +12V | 48 mA | — | 197 |
| module | current -12V | 18 mA | — | 197 |

## Behavior

- HOLD: when gate high → holds current sample position [197]
- HOLD: when gate removed → returns to tracked waveform [197]
- Step switch: when Reset step reached → returns to first step [197]
- Step switch: when On → step outputs trigger [197]
- Clock switch: when external → CLOCK input clocks module [197]
- CLOCK: when hard sync mode → shuffling, polyrhythmic effects [197]
- clock: when at audio rate → sample-rate reduction effect [197]

## Sources

- [197] Befaco Sampling Modulator User Manual (manual): https://befaco.org/docs/Sampling_Modulator/Sampling_Modulator_User_Manual.pdf
- [198] Befaco Sampling Modulator product page (product_page): https://www.befaco.org/sampling-modulator/

Full record as JSON: https://eurorackref.com/befaco/sampling-modulator.json
