# Rampage (Befaco)

Canonical page: https://eurorackref.com/befaco/rampage/

- id: `befaco/rampage`
- width: 18 HP; depth: 26 mm
- power: +12 V 110 mA, −12 V 90 mA, +5 V ? mA
- status: current
- functions: Function Generator, Slew Limiter, Looping / Cycling Envelope, LFO, End-of-Cycle / End-of-Rise Output, Voltage Math / Precision Adder, Logic Gates, Crossfader, Oscillator Sync, Lowpass Filter

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN A | audio, cv, gate | signal to process | not stated | not stated | — | 1132 |
| TRIGG A | trigger | starts function generator | not stated | not stated | — | 1132 |
| RISE CV A | cv | rise time CV | not stated | not stated | — | 1132 |
| FALL CV A | cv | fall time CV | not stated | not stated | — | 1132 |
| CYCLE input A | gate | inverts CYCLE switch | not stated | not stated | — | 1132 |
| IN B | audio, cv, gate | signal to process | not stated | not stated | — | 1132 |
| TRIGG B | trigger | starts function generator | not stated | not stated | — | 1132 |
| RISE CV B | cv | rise time CV | not stated | not stated | — | 1132 |
| FALL CV B | cv | fall time CV | not stated | not stated | — | 1132 |
| CYCLE input B | gate | inverts CYCLE switch | not stated | not stated | — | 1132 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT A | cv, audio | integrator output | not stated | not stated | Channel A | 1132 |
| RISING A | gate | slope detector, rising | ≤ 10 V | not stated | Channel A | 1132 |
| FALLING A | gate | slope detector, falling | ≤ 10 V | not stated | Channel A | 1132 |
| EOC A | trigger | end of cycle pulse | ≤ 10 V | not stated | Channel A | 1132 |
| OUT B | cv, audio | integrator output | not stated | not stated | Channel B | 1132 |
| RISING B | gate | slope detector, rising | ≤ 10 V | not stated | Channel B | 1132 |
| FALLING B | gate | slope detector, falling | ≤ 10 V | not stated | Channel B | 1132 |
| EOC B | trigger | end of cycle pulse | ≤ 10 V | not stated | Channel B | 1132 |
| A>B | gate | comparator output | ≤ 10 V | not stated | Comparator | 1132 |
| MIN | cv, audio | minimum of channels | not stated | not stated | Mix section | 1132 |
| MAX | cv, audio | maximum of channels | not stated | not stated | Mix section | 1132 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| TRIGG button A | button | manual trigger | — | Channel A | 1132 |
| RANGE A | switch | integrator speed range | — | Channel A | 1132 |
| Shape A | knob | response curve | — | Channel A | 1132 |
| RISE A | fader | rise time | — | Channel A | 1132 |
| FALL A | fader | fall time | — | Channel A | 1132 |
| CYCLE A | switch | one shot / cycle | — | Channel A | 1132 |
| TRIGG button B | button | manual trigger | — | Channel B | 1132 |
| RANGE B | switch | integrator speed range | — | Channel B | 1132 |
| Shape B | knob | response curve | — | Channel B | 1132 |
| RISE B | fader | rise time | — | Channel B | 1132 |
| FALL B | fader | fall time | — | Channel B | 1132 |
| CYCLE B | switch | one shot / cycle | — | Channel B | 1132 |
| Balance | knob | A/B crossfader before mix | — | Mix section, A>B, MIN, MAX | 1132 |

## Modes

- One shot A (CYCLE A = one shot) [1132]
- Cycle A (CYCLE A = cycle) [1132]
- One shot B (CYCLE B = one shot) [1132]
- Cycle B (CYCLE B = cycle) [1132]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| RISING / FALLING | gate level | 10 V | — | 1132 |
| EOC | pulse level | 10 V | — | 1132 |
| A>B | output level | 10 V | — | 1132 |
| RANGE | speed ranges | 3 positions | — | 1132 |
| module | width | 18 HP | — | 1133 |
| module | depth | 26 mm | — | 1133 |
| module | current +12V | 110 mA | — | 1133 |
| module | current -12V | 90 mA | — | 1133 |

## Behavior

- IN: when gate patched → AD envelope with sustain [1132]
- One shot: when falling ramp reaches 0V → stops (One shot) [1132]
- Cycle: when falling ramp reaches 0V → retriggers (Cycle) [1132]
- retrigger: when during rising state → not possible [1132]
- retrigger: when during falling state → allowed [1132]
- TRIGG: when cycle mode → acts as hard sync (Cycle) [1132]
- IN: when cycle mode → acts as soft sync (Cycle) [1132]
- CYCLE input: when gate high → inverts CYCLE switch setting [1132]
- CYCLE input: when gate arrives → does not trigger [1132]
- RISING: when output rising → 10V gate [1132]
- FALLING: when output falling → 10V gate [1132]
- EOC: when function generator reaches 0V → short 10V pulse [1132]
- EOC: when external signal processed → does not work [1132]
- A>B: when B output exceeds A → outputs 10V [1132]
- Balance: when always → no effect on OUT A/B [1132]
- slope detector: when external signal → match lag speed to signal [1132]
- RISE / FALL faders: when moved up → frequency decreases in cycle [1132]

## Sources

- [1132] Rampage User Manual (manual): https://befaco.org/docs/Rampage/Rampage_User_Manual.pdf
- [1133] Befaco Rampage product page (product_page): https://www.befaco.org/rampage-2/

Full record as JSON: https://eurorackref.com/befaco/rampage.json
