# Pony VCO (Befaco)

Canonical page: https://eurorackref.com/befaco/pony-vco/

- id: `befaco/pony-vco`
- width: 4 HP; depth: 30 mm
- power: +12 V 32 mA, −12 V 25 mA, +5 V ? mA
- status: current
- functions: Analog VCO, Through-Zero FM, Oscillator Sync, 1V/Oct Pitch Tracking, Wavefolder, Pulse Width Modulation, VCA, LFO

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TZ-FM | audio, cv | through zero FM | not stated | bipolar | — | 1483 |
| Timbre CV Input | cv | Timbre voltage control | not stated | not stated | — | 1483 |
| 1V/OCT | pitch | calibrated frequency CV | not stated | not stated | — | 1483 |
| SYNC | audio, cv | hard sync input | not stated | bipolar | — | 1483 |
| VCA | cv | VCA amplitude control | 0 to 8 V | unipolar | not stated | 1483 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | audio, cv | VCO main output | not stated | bipolar | VCO core, Wavefolder, VCA | 1483 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Freq | knob | manual tuning | — | VCO core | 1483 |
| Range | switch | Freq control range | — | Freq | 1483 |
| Oct | switch | octave jumps | 1 to 7 octave (C1-C7) | VCO core | 1483 |
| Timbre | fader | wave folding amount | — | Wavefolder, PWM | 1483 |
| Shape | switch | waveform selector | — | VCO core, OUT | 1483 |

## Modes

- Sine (Shape = Sine) [1483]
- Triangle (Shape = Triangle) [1483]
- Ramp (Shape = Ramp) [1483]
- Square (Shape = Square) [1483]
- LFO (Range = LFO) [1483]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1483 |
| module | width | 4 HP | 3U | 1484 |
| module | width | 24 HP | 1U version | 1484 |
| module | depth | 30 mm | — | 1483 |
| module | +12V current | 32 mA | — | 1483 |
| module | -12V current | 25 mA | — | 1483 |
| 1V/OCT | tracking range | 8 octaves | — | 1483 |
| Oct | range | 7 octaves | — | 1483 |
| TZ-FM | input range | 10 Vp-p | — | 1483 |
| Timbre CV Input | input range | 10 Vp-p | — | 1483 |
| 1V/OCT | input range | 10 Vp-p | — | 1483 |
| SYNC | input range | 10 Vp-p | — | 1483 |
| OUT | output range | 10 Vp-p | — | 1483 |
| TZ-FM | minimum signal frequency | 0.015 Hz | — | 1483 |
| module | warm-up time | 15 min | — | 1483 |
| PWM | duty cycle range | 0 to 100 % | Square selected | 1483 |

## Behavior

- VCO core: when TZ-FM below zero → keeps oscillating, phase inverted [1483]
- Timbre: when Square selected → becomes bipolar PWM (Square) [1483]
- PWM: when Timbre at minimum/maximum → oscillation stops (Square) [1483]
- PWM: when Timbre centered → 50% duty cycle (Square) [1483]
- SYNC: when signal applied → core resets its cycle [1483]
- SYNC: when non-octave related sync → waveform distorted, ripping tones [1483]
- 1V/OCT: when voltage applied → summed with Oct, Freq, TZ-FM [1483]
- Timbre CV Input: when voltage applied → summed with Timbre position [1483]
- Oct: when position 0 → fifth octave [1483]
- Range: when LFO selected → Freq covers LFO range (LFO) [1483]
- Timbre: when folding amount increased → lowers folding threshold [1483]

## Sources

- [1483] befaco Pony VCO manual (manual): https://www.befaco.org/docs/Pony/Pony_User_Manual.pdf
- [1484] befaco Pony VCO product page (product_page): https://www.befaco.org/pony-vco/

Full record as JSON: https://eurorackref.com/befaco/pony-vco.json
