# MEX (Befaco)

Canonical page: https://eurorackref.com/befaco/mex/

- id: `befaco/mex`
- width: 4 HP; depth: 30 mm
- power: +12 V 12 mA, −12 V ? mA, +5 V ? mA
- status: current
- functions: Trigger / Euclidean Sequencer

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Gate In | gate, audio | gates for Pass In | not stated | not stated | Muxlicer Clock Out | 1465 |
| TO_MUX | — | Muxlicer expansion connection | not stated | not stated | — | 1465 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out | gate | main gate output | not stated | not stated | Gate sequencer | 1465 |
| THRU | — | daisy-chain to next MEX | not stated | not stated | TO_MUX | 1465 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Step 1 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 2 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 3 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 4 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 5 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 6 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 7 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |
| Step 8 switch | switch | step mode select | — | Gate sequencer, Out | 1465 |

## Modes

- All Gates Mode (Step switch = Right) [1465]
- No Gates Mode (Step switch = Center) [1465]
- Pass In Mode (Step switch = Left) [1465]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1465 |
| module | width | 4 HP | — | 1466 |
| module | depth | 30 mm | per manual | 1465 |
| module | depth | 25 mm | including power connector | 1466 |
| module | +12V current | 12 mA | per manual | 1465 |
| module | +12V current | 20 mA | per product page | 1466 |
| Gate sequencer | steps | 8 steps | — | 1465 |

## Behavior

- Out: when all steps Right → copy of Muxlicer All Gates [1465]
- Step: when Right, multiple Muxlicer gates → same gate count at Out [1465]
- Step: when Center position → no gates fired [1465]
- Step: when Left position → passes Gate In signal [1465]
- Gate In: when unpatched → Muxlicer Clock Out [1465]
- Pass In: when Clock Out multiplied → several gates per step [1465]
- Pass In: when Clock Out divided → some steps skipped [1465]
- Gate In: when sine wave patched → gate half period long [1465]
- MEX: when Muxlicer stopped, clock-out enabled → MEX keeps running [1465]

## Sources

- [1465] befaco MEX manual (manual): https://www.befaco.org/docs/MEX/MEX_User_Manual.pdf
- [1466] befaco MEX product page (product_page): https://www.befaco.org/mex/

Full record as JSON: https://eurorackref.com/befaco/mex.json
