# InAmp (Befaco)

Canonical page: https://eurorackref.com/befaco/inamp/

- id: `befaco/inamp`
- width: 4 HP; depth: 30 mm
- power: +12 V 21 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: External Audio I/O

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Ch1 6.3mm input | audio | 6.3mm pre-amp input | not stated | unknown | — | 1456 |
| Ch1 minijack input | audio | minijack pre-amp input | not stated | unknown | — | 1456 |
| Ch2 minijack input | audio | minijack pre-amp input | not stated | unknown | — | 1456 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Ch1 output | audio | amplified output | not stated | unknown | Channel 1 | 1567 |
| Ch2 output | audio | amplified output | not stated | unknown | Channel 2 | 1567 |

## Bidirectional jacks

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Ch2 6.3mm jack | audio | 6.3mm pre-amp input | not stated | unknown | — | 1567 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| GAIN | knob | channel gain | ≤ 20 x | Channel 1 | 1567 |
| GAIN 1 | knob | channel gain | ≤ 20 x | Channel 2 | 1567 |
| JP2 jumper pads | jumper | Ch2 jack routing | — | Ch2 6.3mm jack, Channel 2 | 1567 |

## Modes

- send/return mod (JP2 jumper pads = send/return mod) [1567]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 4 HP | — | 1456 |
| module | depth | 30 mm | including power connector | 1456 |
| module | +12V current | 21 mA | — | 1456 |
| module | -12V current | 10 mA | — | 1456 |
| Channel 1 | gain | ≤ 20 x | — | 1456 |
| Channel 2 | gain | ≤ 20 x | — | 1456 |
| module | channels | 2 count | — | 1456 |

## Behavior

- Ch2 6.3mm jack: when JP2 rewired, C11 bridged → linked with the output (send/return mod) [1567]
- JP2 jumper pads: when send/return mod → upper-middle trace cut, middle-bottom bridged (send/return mod) [1567]

## Sources

- [1456] befaco InAmp product page (product_page): https://www.befaco.org/inamp/
- [1567] Befaco INamp V1.4 assembly guide (manual): https://befaco.org/docs/INamp/INamp_V1_4_Assembly_Guide.pdf

Full record as JSON: https://eurorackref.com/befaco/inamp.json
