# Crush Delay V3 (Befaco)

Canonical page: https://eurorackref.com/befaco/crush-delay-v3/

- id: `befaco/crush-delay-v3`
- width: 11 HP; depth: 30 mm
- power: +12 V 130 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Delay, Distortion / Saturation, VCA, Send / return

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| IN | audio | main audio input | not stated | not stated | — | 1295 |
| IN VOL CV | cv | input VCA CV | not stated | not stated | +10V | 1295 |
| RETURN | audio | return audio input | not stated | not stated | — | 1295 |
| RET VOL CV | cv | return VCA CV | not stated | not stated | +10V | 1295 |
| TIME CV | cv | delay time CV | -10 to 10 V | bipolar | — | 1295 |
| FEEDBACK CV | cv | feedback amount CV | -10 to 10 V | bipolar | — | 1295 |
| DRY/WET CV | cv | dry/wet CV | -10 to 10 V | bipolar | — | 1295 |
| GATE 1 | gate | crush modifier gate | not stated | not stated | — | 1295 |
| GATE 2 | gate | crush modifier gate | not stated | not stated | — | 1295 |
| GATE 3 | gate | crush modifier gate | not stated | not stated | — | 1295 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | audio | main audio output | not stated | not stated | Dry/Wet | 1295 |
| SEND | audio | fully wet output | not stated | not stated | Delay | 1295 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| TIME | knob | delay time | — | Delay | 1295 |
| FEEDBACK | knob | feedback amount | — | Feedback VCA | 1295 |
| DRY/WET | knob | dry/wet balance | — | Dry/Wet, OUT | 1295 |
| IN VOL | knob | input volume | — | IN VCA, IN VOL CV | 1295 |
| RET VOL | knob | return volume | — | Return VCA, RET VOL CV | 1295 |
| CRUSH 1 | switch | crush modifier on/off | — | Crush section, Delay | 1295 |
| CRUSH 2 | switch | crush modifier on/off | — | Crush section, Delay | 1295 |
| CRUSH 3 | switch | crush modifier on/off | — | Crush section, Delay | 1295 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Delay | clean delay time | 400 ms | — | 1295 |
| Delay | clean delay time | 400 ms | — | 1296 |
| Delay | dirty repetitions | ≤ 2 s | — | 1296 |
| module | width | 11 HP | — | 1295 |
| module | width | 11 HP | — | 1296 |
| module | depth | 30 mm | — | 1295 |
| module | depth | 26 mm | including power connector | 1296 |
| module | +12V current | 130 mA | — | 1295 |
| module | -12V current | 30 mA | — | 1295 |
| module | +12V current | 115 mA | — | 1296 |
| module | -12V current | 65 mA | — | 1296 |

## Behavior

- IN VOL: when IN VOL CV unpatched → sets input volume [1295]
- IN VOL: when CV patched → attenuates CV [1295]
- RET VOL: when RET VOL CV unpatched → sets return volume [1295]
- RET VOL: when CV patched → attenuates CV [1295]
- TIME: when CCW to middle → clean delay [1295]
- TIME: when middle to fully CW → signal crushes [1295]
- RETURN: when signal patched → feeds Delay only, not Dry/Wet [1295]
- Crush modifier: when switch on → modifier active [1295]
- Crush modifier: when gate at GATE input → modifier active [1295]
- Crush section: when modifier active → degrades delay at slow rates [1295]

## Sources

- [1295] befaco Crush Delay V3 manual (manual): https://befaco.org/docs/Crush_Delay/Crush_Delay_V3_User_Manual.pdf
- [1296] befaco Crush Delay V3 product page (product_page): https://www.befaco.org/crush-delay-v3/

Full record as JSON: https://eurorackref.com/befaco/crush-delay-v3.json
