# BF-22 (Befaco)

Canonical page: https://eurorackref.com/befaco/bf-22/

- id: `befaco/bf-22`
- width: 17 HP; depth: 30 mm
- power: +12 V 40 mA, −12 V 35 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Multimode Filter, Attenuverter / Offset

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio input A | audio | filter audio input | not stated | not stated | — | 420 |
| Cut-off CV A | cv | cut-off CV | not stated | not stated | — | 420 |
| Cut-off V/oct CV A | cv, pitch | cut-off CV, V/oct | not stated | not stated | — | 420 |
| Resonance CV A | cv | resonance CV | not stated | not stated | — | 420 |
| Audio input B | audio | filter audio input | not stated | not stated | Audio output A | 420 |
| Cut-off CV B | cv | cut-off CV | not stated | not stated | — | 420 |
| Cut-off V/oct CV B | cv, pitch | cut-off CV, V/oct | not stated | not stated | — | 420 |
| Resonance CV B | cv | resonance CV | not stated | not stated | — | 420 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Audio output A | audio | filter audio output | not stated | not stated | Filter A | 420 |
| Audio output B | audio | filter audio output | not stated | not stated | Filter B | 420 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| HP/LP switch A | switch | high-pass / low-pass select | — | Filter A | 420 |
| Cut-off A | knob | manual cut-off frequency | — | Filter A | 420 |
| Resonance A | knob | manual resonance | — | Filter A | 420 |
| Cut-off attenuverter A | knob | cut-off CV attenuverter | — | Cut-off CV A | 420 |
| HP/LP switch B | switch | high-pass / low-pass select | — | Filter B | 420 |
| Cut-off B | knob | manual cut-off frequency | — | Filter B | 420 |
| Resonance B | knob | manual resonance | — | Filter B | 420 |
| Cut-off attenuverter B | knob | cut-off CV attenuverter | — | Cut-off CV B | 420 |
| LINK switch | switch | link filter A→B | — | Filter A, Filter B, Audio input B | 420 |

## Modes

- High-pass (HP/LP switch = HP) [420]
- Low-pass (HP/LP switch = LP) [420]
- Linked (LINK switch = up) [420]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Cut-off CV | V/oct tracking range | 4 octaves | — | 420 |
| Cut-off CV | tracking range | 3 octaves | introduction text | 420 |
| module | supply | 12 to 15 V | — | 420 |
| module | current +12V | 40 mA | — | 420 |
| module | current -12V | 35 mA | — | 420 |
| module | current -12V | 20 mA | product page | 421 |
| module | width | 17 HP | — | 421 |
| module | depth | 30 mm | — | 421 |

## Behavior

- LINK switch: when flipped up → filter A output to B input [420]
- Audio input B: when LINK up → disconnected [420]
- Cut-off attenuverter: when mid-point → CV = 0 [420]
- Cut-off attenuverter: when fully anti-clockwise → max level, inverted [420]
- Resonance: when just before LEDs flash → max resonance, min noise [420]

## Sources

- [420] Befaco BF-22 User Manual (manual): https://befaco.org/docs/BF-22/BF_22_User_Manual.pdf
- [421] Befaco BF-22 product page (product_page): https://www.befaco.org/bf-22/

Full record as JSON: https://eurorackref.com/befaco/bf-22.json
