# Neo Trinity (Bastl Instruments)

Canonical page: https://eurorackref.com/bastl-instruments/neo-trinity/

- id: `bastl-instruments/neo-trinity`
- width: 8 HP; depth: 24 mm
- power: +12 V 100 mA, −12 V 35 mA, +5 V ? mA
- status: current
- functions: LFO, ADSR Envelope, Slew Limiter, Random / Sample & Hold CV, Quantizer, Step Sequencer, Trigger / Euclidean Sequencer, Euclidean rhythm, Master Clock, Clock Divider / Multiplier, Tempo / Clock Sync, VCA, CV Recorder / Gesture Looper, Unipolar/bipolar switch, Attenuverter / Offset, Gate / Trigger Utility

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| META IN | cv, trigger, gate | assignable CV input | not stated | unknown | — | 975 |
| IN E | cv, trigger, gate | channel E CV input | not stated | unknown | — | 975 |
| IN F | cv, trigger, gate | channel F CV input | not stated | unknown | — | 975 |
| CLK IN | clock | external clock input | not stated | unknown | — | 975 |
| RESET | trigger | automation reset input | not stated | unknown | — | 975 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| A | cv, gate | channel A output | -5 to 5 V | unknown | Channel A | 975 |
| B | cv, gate | channel B output | -5 to 5 V | unknown | Channel B | 975 |
| C | cv, gate | channel C output | -5 to 5 V | unknown | Channel C | 975 |
| D | cv, gate | channel D output | -5 to 5 V | unknown | Channel D | 975 |
| E | cv, gate | channel E output | -5 to 5 V | unknown | Channel E | 975 |
| F | cv, gate | channel F output | -5 to 5 V | unknown | Channel F | 975 |
| CLK OUT | clock | module clock output | 0 to 5 V | unipolar | CLK channel | 975 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| RATE | knob | selected channel main parameter | — | Channel A, Channel B, Channel C, Channel D, Channel E, Channel F, CLK channel | 975 |
| A button | button | select channel A | — | Channel A | 975 |
| B button | button | select channel B | — | Channel B | 975 |
| C button | button | select channel C | — | Channel C | 975 |
| D button | button | select channel D | — | Channel D | 975 |
| E button | button | select channel E | — | Channel E | 975 |
| F button | button | select channel F | — | Channel F | 975 |
| MODE | button | change channel mode | — | Channel A, Channel B, Channel C, Channel D, Channel E, Channel F | 975 |
| CLK button | button | enter CLK channel | — | CLK channel | 975 |
| MUTE | button | channel mute | — | Channel A, Channel B, Channel C, Channel D, Channel E, Channel F | 975 |
| BANK | button | bank load / save | — | module | 975 |
| REC | button | record automation | — | Channel A, Channel B, Channel C, Channel D, Channel E, Channel F | 975 |
| SHIFT | button | shift / trigger record | — | Channel A, Channel B, Channel C, Channel D, Channel E, Channel F | 975 |

## Modes

- LFO (MODE = LFO) [975]
- ENV (MODE = ENV) [975]
- CV (MODE = CV) [975]
- INTERNAL CLK MODE [975]
- EXTERNAL CLK MODE [975]
- SYNC [975]
- SLEW/AR [975]
- NON-RETRIGGER [975]
- BIPOLAR (channel button + MUTE = on) [975]
- UNIPOLAR (channel button + MUTE = off) [975]
- REGULAR [975]
- REGULAR ATTENUATED [975]
- INVERTED [975]
- INVERTED ATTENUATED [975]
- VCA [975]
- TRIG [975]
- SAMPLE & HOLD [975]
- TRIG FILL [975]
- User calibration [975]
- Factory test Mode [975]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| module | width | 8 HP | — | 975 |
| module | depth | 24 mm | — | 975 |
| module | +12V current | 100 mA | maximum (<100) | 975 |
| module | -12V current | 35 mA | maximum (<35) | 975 |
| outputs | output voltage | -5 to 5 V | bipolar | 975 |
| outputs | output voltage | 0 to 5 V | unipolar | 975 |
| outputs | update rate | 4 kHz | — | 975 |
| inputs | update rate | 4 kHz | — | 975 |
| LFO | period | ≤ 260 s | slowest | 975 |
| LFO | frequency | ≤ 180 Hz | — | 975 |
| ENV | duration | 1 to 8000 ms | — | 975 |
| automation | length | 2 to 64 steps | — | 975 |
| internal clock | tempo | 35 to 420 BPM | — | 975 |
| CLK IN | max clock frequency | 50 Hz | — | 975 |
| CLK OUT | output voltage | 0 to 5 V | — | 975 |
| CV | voltage range | 2 V | range E off | 975 |
| CV | voltage range | 5 V | range E on | 975 |
| quantizer | scales | 8 count | — | 975 |
| module | banks | 6 count | — | 975 |
| TRIG FILL | algorithms | 6 count | — | 975 |
| non-quantized trigs | resolution | 24 x clock cycle | — | 975 |
| external clock | divider/multiplier | 0.125 to 4 ratio | — | 975 |
| TRIG FILL | patterns per drum algorithm | 8 count | — | 975 |
| User calibration | exit hold | 5 s | — | 975 |
| PASTE | BANK hold | 2 s | — | 975 |
| VCA input mode | normal output at | 5 V | — | 975 |
| module | channels | 6 count | — | 975 |

## Behavior

- CLK channel: when CLK IN unpatched → internal clock generated [975]
- CLK channel: when CLK IN patched → divides / multiplies external clock [975]
- CLK channel: when MODE pressed (CLK channel) → clock and automation start/stop [975]
- CLK channel: when clock restarted → sequences play from beginning [975]
- CLK channel: when automation recorded while stopped → clock restarts [975]
- CLK channel: when divider changed → completes current cycle first [975]
- CLK channel: when tap tempo → clock four times tap rate [975]
- RESET: when trigger received → sequencers go to step 1 [975]
- RESET: when channel set to ignore → channel runs independently [975]
- LFO: when SYNC on → RATE sets clock divider (LFO) [975]
- LFO: when trigger recorded / received → LFO resets (LFO) [975]
- ENV: when retrigger enabled → restarts on each trigger (ENV) [975]
- ENV: when retrigger disabled → finishes before new trigger (ENV) [975]
- ENV: when regular mode → rising edge, full shape (ENV) [975]
- ENV: when SLEW on → follows input with attack/decay (ENV) [975]
- ENV: when SLEW on, gate input → AR envelope (ENV) [975]
- ENV: when SLEW, input not TRIG mode → slew has no effect (ENV) [975]
- ENV: when SLEW on, recording → records durational gates (ENV) [975]
- ENV: when variable shape, RATE CW → longer decay (ENV) [975]
- ENV: when variable shape, RATE CCW → longer attack and decay (ENV) [975]
- CV: when quantization on → output snapped to scale (CV) [975]
- CV: when REC + SHIFT held → records continuous gates (CV) [975]
- RATE: when automation recorded → knob offsets sequence [975]
- RATE: when parked in middle → original automation kept [975]
- REC light: when automation present → on [975]
- VCA input mode: when 0V in → silent output [975]
- VCA input mode: when -5V in → inverted output [975]
- SAMPLE & HOLD input mode: when rising edge → holds channel output value [975]
- SAMPLE & HOLD input mode: when no jack inserted → channel unaffected [975]
- TRIG input mode: when rising edge → triggers ENV / resets LFO [975]
- REGULAR input mode: when +1V, LFO mode → LFO 2x faster [975]
- outputs: when bipolar → -5V to +5V [975]
- outputs: when unipolar → 0V to +5V [975]
- non-quantized trigs: when recorded → 24x clock resolution [975]
- TRIG FILL: when divider, non-quantized trigs → can multiply clock [975]
- CLK light: when automation sequence start → blinks shortly [975]
- IN/OUT expansion header: when any signal connected → may damage module [975]

## Sources

- [975] Bastl Neo Trinity Manual v1.1 (manual): https://bastl-instruments.com/files/manual-neo-trinity-web.pdf
- [976] Bastl Neo Trinity product page (product_page): https://bastl-instruments.com/eurorack/modules/neo-trinity

Full record as JSON: https://eurorackref.com/bastl-instruments/neo-trinity.json
