# Crust (Bastl Instruments)

Canonical page: https://eurorackref.com/bastl-instruments/crust/

- id: `bastl-instruments/crust`
- width: 8 HP; depth: 24 mm
- power: +12 V 90 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Drum Voice, 1V/Oct Pitch Tracking, ADSR Envelope, Ring Modulator, Distortion / Saturation, Lowpass Filter, Highpass Filter, Noise Source, VCA

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| TRIG | trigger | trigger input | not stated | unknown | — | 665 |
| PITCH V/OCT | pitch, cv | TONE pitch V/oct | -5 to 8 V | unknown | — | 665 |
| LAYER CV | cv | LAYER CV | -5 to 5 V | unknown | — | 665 |
| ENV CV | cv | ENV CV | -5 to 5 V | unknown | — | 665 |
| VELOCITY | cv, trigger | envelope amplitude | -5 to 5 V | unknown | — | 665 |
| TIMBRE CV | cv | TIMBRE CV | -5 to 5 V | unknown | — | 665 |
| CTRL CV | cv | assignable CV | -5 to 5 V | unknown | — | 665 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| DRUM | audio | main drum output | not stated | unknown | CLIP | 665 |
| ENV OUT | cv | envelope output | 0 to 5 V | unipolar | envelopes | 665 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| PITCH | knob | tuning parameter | — | TONE | 665 |
| PITCH button | button | cycle PITCH mode | — | PITCH | 665 |
| TONE button | button | select TONE mode | — | TONE | 665 |
| NOISE button | button | select NOISE mode | — | NOISE | 665 |
| LAYER | fader | TONE/NOISE crossfade | — | TONE, NOISE | 665 |
| ENV | knob | amplitude envelope macro | — | envelopes | 665 |
| TIMBRE | fader | TIMBRE parameter amount | — | FILTER, CLIP, SHAPE | 665 |
| TIMBRE button | button | cycle TIMBRE parameter | — | TIMBRE | 665 |
| CTRL | knob | assignable control | — | CTRL destination | 665 |

## Modes

- OCTAVE [665]
- SWEEP [665]
- DETUNE [665]
- TUNE [665]
- FM [665]
- FM2 [665]
- RING [665]
- DUAL [665]
- WHITE [665]
- CLAP [665]
- BIT [665]
- METAL [665]
- FILTER [665]
- CLIP [665]
- SHAPE [665]
- sample & hold [665]
- V/OCT CALIBRATION [665]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| OCTAVE | pitch range | 10 octaves | — | 665 |
| DETUNE | exponential ratio | ≤ 16 ratio | — | 665 |
| METAL noise | fundamental above TONE | 2 octaves | — | 665 |
| CTRL | range | -6 to 6 V | — | 665 |
| module | width | 8 HP | — | 666 |
| module | depth | 24 mm | — | 666 |
| module | current +12V | 90 mA | — | 666 |
| module | current -12V | 20 mA | — | 666 |

## Behavior

- TIMBRE fader: when centered → TIMBRE parameters inactive [665]
- SWEEP: when knob centered → no pitch sweep [665]
- SWEEP: when knob left → pitch bends down, returns [665]
- SWEEP: when knob right → short downward kick sweep [665]
- VELOCITY: when TRIG unpatched → acts as VCA/envelope input [665]
- VELOCITY: when rising voltage, TRIG unpatched → triggers internal envelopes [665]
- sample & hold CV: when TRIG unpatched → inactive [665]
- CV input: when sample & hold enabled → updates only on trigger [665]
- CTRL knob: when CTRL CV patched → acts as attenuverter [665]
- CTRL: when dedicated control exists → adds to its value [665]
- CTRL: when always → single destination, never unassigned [665]
- trigger received: when always → TIMBRE lights dip [665]
- NOISE: when PITCH changes → independent, except METAL [665]
- boot: when 2 flashes near NOISE → V/OCT needs recalibration [665]

## Sources

- [665] Bastl Crust Manual (fw 1.1, rev. 2025-07-15) (manual): https://bastl-instruments.com/content/files/manual-crust-web.pdf
- [666] Bastl Crust product page (product_page): https://bastl-instruments.com/eurorack/modules/crust

Full record as JSON: https://eurorackref.com/bastl-instruments/crust.json
