# Cinnamon (Bastl Instruments)

Canonical page: https://eurorackref.com/bastl-instruments/cinnamon/

- id: `bastl-instruments/cinnamon`
- width: 5 HP; depth: 35 mm
- power: +12 V 30 mA, −12 V 30 mA, +5 V ? mA
- status: current
- functions: Lowpass Filter, Highpass Filter, Bandpass / Notch Filter, Simultaneous Multimode Outputs, Self-Oscillating Filter, 1V/Oct Pitch Tracking, Distortion / Saturation

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| INPUT | audio | filter audio input | not stated | unknown | — | 960 |
| Left CV | cv, pitch | V/oct cutoff CV | not stated | unknown | — | 960 |
| Right CV | cv | attenuated cutoff CV | not stated | unknown | — | 960 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| HIGH-PASS | audio | high-pass output | not stated | unknown | state-variable filter | 960 |
| BAND-PASS | audio | band-pass output | not stated | unknown | state-variable filter | 960 |
| LOW-PASS | audio | low-pass output | not stated | unknown | state-variable filter | 960 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| CUTOFF | knob | cutoff frequency | — | state-variable filter | 960 |
| Attenuator | knob | Right CV amount | — | Right CV | 960 |
| RESONANCE | knob | resonance amount | — | state-variable filter | 960 |
| Character upper switch | switch | resonance character | — | state-variable filter | 960 |
| Character lower switch | switch | resonance character | — | state-variable filter | 960 |
| Input level | knob | input gain | — | INPUT | 960 |
| DRIVE | switch | input gain range | — | Input level | 960 |
| Volt-per-octave trimmer | other | V/oct tracking adjust | — | Left CV | 960 |

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| LOW-PASS | slope | 12 dB/oct | — | 960 |
| HIGH-PASS | slope | 12 dB/oct | — | 960 |
| BAND-PASS | slope | 6 dB/oct | — | 960 |
| Input level | gain | 0 to 2 x | DRIVE off | 960 |
| Input level | gain | 0 to 10 x | DRIVE on | 960 |
| module | width | 5 HP | — | 960 |
| module | depth | 35 mm | — | 960 |
| module | current +12V | ≤ 30 mA | — | 960 |
| module | current -12V | ≤ 30 mA | — | 960 |

## Behavior

- filter: when resonance fully clockwise → self-oscillates at cutoff [960]
- Character switches: when both lower → sinewave resonance [960]
- Character switches: when switched on → may disrupt V/oct tracking [960]
- Character switches: when self-oscillating → change the waveform [960]
- Character response: when input level changes → response changes [960]
- Right CV: when Attenuator fully CCW → no cutoff effect [960]
- Left CV tracking: when Character switches off → tracks reliably [960]
- input: when DRIVE upper → likely overdriven [960]

## Sources

- [960] Cinnamon User Manual v1.4 (manual): https://bastl-instruments.com/content/files/manual-cinnamon-web-v1.4.pdf
- [961] Bastl Cinnamon product page (product_page): https://bastl-instruments.com/eurorack/modules/cinnamon

Full record as JSON: https://eurorackref.com/bastl-instruments/cinnamon.json
