# Basil (Bastl Instruments)

Canonical page: https://eurorackref.com/bastl-instruments/basil/

- id: `bastl-instruments/basil`
- width: 8 HP; depth: 24 mm
- power: +12 V 90 mA, −12 V 20 mA, +5 V ? mA
- status: current
- functions: Delay, Stereo Inputs / Outputs, Freeze / Hold, Tempo / Clock Sync, 1V/Oct Pitch Tracking, Distortion / Saturation, Reverb, Attenuverter / Offset

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| L IN | audio | left audio input | not stated | unknown | — | 1126 |
| R IN | audio | right audio input | not stated | unknown | L IN | 1126 |
| DELAY V/OCT | pitch, cv | delay time V/oct | not stated | unknown | — | 1126 |
| SYNC | clock | clock sync input | -6 to 6 V | unknown | — | 1126 |
| CTRL CV | cv | assignable CV | -6 to 6 V | unknown | — | 1126 |
| SPACE CV | cv | selected SPACE flavor CV | not stated | unknown | — | 1126 |
| FEEDBACK CV | cv | feedback CV | not stated | unknown | — | 1126 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| L OUT | audio | left output | not stated | unknown | delay | 1126 |
| R OUT | audio | right output | not stated | unknown | delay | 1126 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| DELAY | knob | delay TIME/STEREO/FINE | — | delay | 1126 |
| DELAY button | button | select DELAY knob function | — | DELAY | 1126 |
| SPEED button | button | sample rate select | — | delay | 1126 |
| FREEZE button | button | freeze buffer | — | delay | 1126 |
| SPACE button | button | cycle SPACE flavor | — | SPACE section | 1126 |
| SPACE fader | fader | SPACE flavor intensity | — | SPACE section | 1126 |
| DRY/WET | fader | dry/wet crossfade | — | L OUT, R OUT | 1126 |
| FEEDBACK | knob | feedback amount | — | delay | 1126 |
| CTRL | knob | assignable control | — | TIME, STEREO, FINE, SPEED, DRY/WET, FEEDBACK, FREEZE, LO-FI, BLUR, FILTER, TAPS | 1126 |
| feedback jumper | jumper | FEEDBACK input vs PULSE | — | FEEDBACK CV | 1126 |

## Modes

- HALF speed [1126]
- RANGE [1126]
- FREEZE [1126]
- LO-FI [1126]
- ping pong [1126]
- Hyper-SPACE [1126]
- ASSIGNMENT [1126]
- V/OCT CALIBRATION [1126]
- sync [1126]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| delay | max sample rate | 41.66 kHz | — | 1126 |
| delay | bit depth | 16 bit | — | 1126 |
| delay | max delay time | 0.5 s | stereo, full speed | 1126 |
| delay | max delay time | 1 s | mono via ping-pong | 1126 |
| delay | max delay time | 1 s | half speed | 1126 |
| delay | max delay time | 2 s | quarter speed | 1126 |
| delay | max delay time | 4 s | eighth speed | 1126 |
| STEREO | right/left time ratio | 0.5 ratio | fully CW | 1126 |
| SYNC | clock divisions | 0.125 to 32 division | SYNC patched | 1126 |
| module | width | 8 HP | — | 1127 |
| module | depth | 24 mm | — | 1127 |
| module | current +12V | 90 mA | — | 1127 |
| module | current -12V | 20 mA | — | 1127 |

## Behavior

- R IN: when unpatched → copies L IN [1126]
- SYNC: when cable detected → TIME quantized to divisions [1126]
- FINE: when applied → after sync quantization [1126]
- FINE: when SYNC plugged/unplugged → reset to zero [1126]
- STEREO: when fully CCW → L and R identical [1126]
- anti-aliasing filter: when lower speeds → removes high frequencies [1126]
- anti-aliasing filter: when LO-FI on → disabled [1126]
- FREEZE: when active → input disconnected, buffer loops [1126]
- FREEZE: when active → BLUR/FILTER/TAPS/SPEED still work [1126]
- SPACE fader: when centered → no effect [1126]
- SPACE fader: when SPACE button pressed → frozen until moved (Hyper-SPACE) [1126]
- TAPS: when fader at extremes → taps enter feedback [1126]
- FEEDBACK: when maximum → hits limiter, stays controlled [1126]
- CTRL knob: when CTRL CV patched → acts as attenuverter [1126]
- SPEED as CTRL destination: when CV applied → selects four sample rates [1126]
- FEEDBACK CV: when jumper not CV position → input not functional [1126]
- boot: when 2 flashes near FREEZE → V/OCT needs recalibration [1126]

## Sources

- [1126] Bastl Basil Manual (manual): https://bastl-instruments.com/files/manual-basil-delay-web.pdf
- [1127] Bastl Basil product page (product_page): https://bastl-instruments.com/eurorack/modules/basil

Full record as JSON: https://eurorackref.com/bastl-instruments/basil.json
