# Quaid Megaslope (ALM Busy Circuits)

Canonical page: https://eurorackref.com/alm-busy-circuits/quaid-megaslope/

- id: `alm-busy-circuits/quaid-megaslope`
- width: 19 HP; depth: 38 mm
- power: +12 V 70 mA, −12 V 35 mA, +5 V ? mA
- status: current
- functions: Function Generator, ADSR Envelope, Looping / Cycling Envelope, LFO, Step Sequencer, End-of-Cycle / End-of-Rise Output, Unipolar/bipolar switch

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trig | trigger, clock | trigger input | unknown | unknown | — | 381 |
| Gate | gate | gate input | unknown | unknown | — | 381 |
| Level CV 1 | cv | stage 1 level CV | 0 to 5 V | unipolar | — | 381 |
| Time CV 1 | cv | stage 1 time CV | 0 to 5 V | unipolar | — | 381 |
| Level CV 2 | cv | stage 2 level CV | 0 to 5 V | unipolar | — | 381 |
| Time CV 2 | cv | stage 2 time CV | 0 to 5 V | unipolar | — | 381 |
| Level CV 3 | cv | stage 3 level CV | 0 to 5 V | unipolar | — | 381 |
| Time CV 3 | cv | stage 3 time CV | 0 to 5 V | unipolar | — | 381 |
| Level CV 4 | cv | stage 4 level CV | 0 to 5 V | unipolar | — | 381 |
| Time CV 4 | cv | stage 4 time CV | 0 to 5 V | unipolar | — | 381 |
| Level CV 5 | cv | stage 5 level CV | 0 to 5 V | unipolar | — | 381 |
| Time CV 5 | cv | stage 5 time CV | 0 to 5 V | unipolar | — | 381 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| +Out | cv | main unipolar output | 0 to 8 V | unipolar | Megaslope | 381 |
| +/-Out | cv | bipolar output | -5 to 5 V | bipolar | Megaslope | 381 |
| EOC | trigger | end of cycle trigger | not stated | unknown | Megaslope | 381 |
| End of Stage | trigger | end of stage trigger | not stated | unknown | Megaslope | 382 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Mode | button | operating mode select | — | Megaslope | 381 |
| Level 1 | knob | stage destination level | — | Megaslope | 381 |
| Time 1 | knob | stage time | — | Megaslope | 381 |
| Slope 1 | knob | stage curve log/lin/exp | — | Megaslope | 381 |
| Level 2 | knob | stage destination level | — | Megaslope | 381 |
| Time 2 | knob | stage time | — | Megaslope | 381 |
| Slope 2 | knob | stage curve log/lin/exp | — | Megaslope | 381 |
| Level 3 | knob | stage destination level | — | Megaslope | 381 |
| Time 3 | knob | stage time | — | Megaslope | 381 |
| Slope 3 | knob | stage curve log/lin/exp | — | Megaslope | 381 |
| Level 4 | knob | stage destination level | — | Megaslope | 381 |
| Time 4 | knob | stage time | — | Megaslope | 381 |
| Slope 4 | knob | stage curve log/lin/exp | — | Megaslope | 381 |
| Level 5 | knob | stage destination level | — | Megaslope | 381 |
| Time 5 | knob | stage time | — | Megaslope | 381 |
| Slope 5 | knob | stage curve log/lin/exp | — | Megaslope | 381 |

## Modes

- Env (Mode = Env) [381]
- Loop (Mode = Loop) [381]
- Step (Mode = Step) [381]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Time | stage time | 1 to 2 ms | fully CCW | 381 |
| Time | stage time | 100 ms | 12 o'clock | 381 |
| Time | stage time | 3 s | 9 o'clock (as printed) | 381 |
| Time | stage time | 3 min | 5 o'clock (max) | 381 |
| Megaslope | stage count | 5 stages | — | 381 |
| module | current +12V | 70 mA | — | 381 |
| module | current -12V | 35 mA | — | 381 |
| module | width | 19 HP | — | 381 |
| module | depth | 38 mm | manual | 381 |
| module | depth | 32 mm | product page | 382 |

## Behavior

- Gate: when held high → sustains at selected stage (Env) [381]
- Gate: when low before sustain stage → envelope ends immediately (Env) [381]
- Envelope: when retriggered mid-cycle → starts from current level (Env) [381]
- Trig: when trigger received → runs all 5 stages (Env) [381]
- Trig: when trigger received → steps to next stage (Step) [381]
- Sequence: when set stage count reached → cycles to initial stage (Step) [381]
- Step level: when Time above zero → slides to new level (Step) [381]
- Gate: when gate received → resets to first stage (Step) [381]
- Final stage: when cycle end → moves to first level (Loop) [381]
- Loop: when always → cycles automatically (Loop) [381]
- +/-Out: when not active → sits at -5V [381]
- EOC: when full cycle completed → outputs trigger [381]

## Sources

- [381] ALM020 'Quaid Megaslope' Operation Manual (manual): https://assets.busycircuits.com/docs/alm020-megaslope-manual.pdf
- [382] ALM Busy Circuits Quaid Megaslope product page (product_page): https://busycircuits.com/products/alm020

Full record as JSON: https://eurorackref.com/alm-busy-circuits/quaid-megaslope.json
