# Pip Slope (ALM Busy Circuits)

Canonical page: https://eurorackref.com/alm-busy-circuits/pip-slope/

- id: `alm-busy-circuits/pip-slope`
- width: 4 HP; depth: 38 mm
- power: +12 V 30 mA, −12 V 10 mA, +5 V ? mA
- status: current
- functions: ADSR Envelope, Function Generator, Looping / Cycling Envelope, LFO, End-of-Cycle / End-of-Rise Output

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Trigger | trigger | start envelope | not stated | unknown | — | 385 |
| Gate | gate | sustained envelope gate | not stated | unknown | — | 385 |
| Attack CV | cv | attack time CV | -5 to 5 V | bipolar | — | 385 |
| Decay CV | cv | decay time CV | -5 to 5 V | bipolar | — | 385 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| OUT | cv | envelope voltage output | not stated | unknown | envelope | 385 |
| EOS | trigger | end of slope trigger | not stated | unknown | envelope | 385 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Attack | knob | attack time offset | 0.001 to 420 s | envelope | 385 |
| Decay | knob | decay time offset | 0.001 to 420 s | envelope | 385 |
| Shape | knob | stage slope shape | — | envelope | 385 |
| LOOP | knob | loop mode and amount | — | envelope | 385 |
| Output voltage range | other | 5V or 8V max | — | OUT | 386 |

## Modes

- Attack/Decay [385]
- Attack/Sustain/Decay [385]
- Repeat infinitely [385]
- Decreasing amplitude [385]
- Decreasing Time [385]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| Attack | stage time | 0.001 to 420 s | approx | 385 |
| Decay | stage time | 0.001 to 420 s | approx | 385 |
| Decreasing amplitude | amplitude per repeat | 50 % | Decreasing amplitude mode | 385 |
| Decreasing Time | time reduction per repeat | 67 % | approx, Decreasing Time mode | 385 |
| OUT | maximum envelope level | 5 V | 5V range | 386 |
| OUT | maximum envelope level | 8 V | 8V range | 386 |
| module | current draw +12V | 30 mA | — | 385 |
| module | current draw -12V | 10 mA | — | 385 |
| module | width | 4 HP | — | 385 |
| module | depth | 38 mm | — | 385 |

## Behavior

- Trigger: when after attack stage → decay follows immediately [385]
- Trigger: when in loop mode → resets envelope [385]
- Gate: when held high after attack → output sustains [385]
- Gate: when goes low → decay stage begins [385]
- EOS: when decay stage ends → fires trigger [385]
- Decreasing amplitude: when each repeat → amplitude halves [385]
- Decreasing Time: when each repeat → time reduces ~2/3 [385]
- Attack/Decay CV: when patched → offsets knob time [385]

## Sources

- [385] ALM028 'Pip Slope' Operation Manual (manual): https://assets.busycircuits.com/docs/alm028-manual.pdf
- [386] ALM Busy Circuits Pip Slope product page (product_page): https://busycircuits.com/products/alm028

Full record as JSON: https://eurorackref.com/alm-busy-circuits/pip-slope.json
