{
  "id": "alm-busy-circuits/pip-lfo",
  "manufacturer": {
    "id": "alm-busy-circuits",
    "name": "ALM Busy Circuits"
  },
  "name": "Pip LFO",
  "hp": 4,
  "depth_mm": 32,
  "power": {
    "plus_12": 40,
    "minus_12": 20,
    "plus_5": null
  },
  "production_status": "current",
  "function_tags": [
    "lfo",
    "analog_vco",
    "one_v_per_octave",
    "simultaneous_waveform_outputs",
    "hard_sync",
    "polarity_switch"
  ],
  "url": "https://eurorackref.com/alm-busy-circuits/pip-lfo/",
  "record": {
    "blocks": [
      {
        "src": 383,
        "name": "LFO",
        "kind": "analogue low frequency oscillator",
        "controls": [
          "FREQ",
          "VCO MODE",
          "V/OCT TRIM"
        ],
        "inputs": [
          "FREQ",
          "Rst"
        ],
        "outputs": [
          "Square",
          "Triangle bipolar",
          "Triangle unipolar",
          "Saw bipolar",
          "Saw unipolar",
          "Sine bipolar",
          "Sine unipolar"
        ],
        "types": [
          "lfo",
          "oscillator"
        ]
      }
    ],
    "jacks": [
      {
        "src": 383,
        "name": "FREQ",
        "direction": "input",
        "signal_types": [
          "cv",
          "pitch"
        ],
        "function": "frequency CV",
        "voltage_min": null,
        "voltage_max": null,
        "polarity": null,
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [
          "LFO"
        ],
        "sourced_from": [],
        "selected_by": [],
        "per_mode": [
          {
            "mode": "LFO",
            "function": "LFO rate CV",
            "feeds": [
              "LFO"
            ],
            "direction": null
          },
          {
            "mode": "VCO MODE",
            "function": "pitch, rough V/Oct",
            "feeds": [
              "LFO"
            ],
            "direction": null
          }
        ],
        "types": [
          "rate_cv_in",
          "pitch_cv_in"
        ],
        "not_stated": [
          "voltage_min",
          "voltage_max",
          "impedance_ohms"
        ],
        "name_basis": "printed",
        "label_in_source": true
      },
      {
        "src": 383,
        "name": "Rst",
        "direction": "input",
        "signal_types": [
          "trigger"
        ],
        "function": "reset all waveforms",
        "voltage_min": null,
        "voltage_max": null,
        "polarity": null,
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [
          "LFO"
        ],
        "sourced_from": [],
        "selected_by": [],
        "per_mode": [
          {
            "mode": "LFO",
            "function": "reset waveform cycles",
            "feeds": [
              "LFO"
            ],
            "direction": null
          },
          {
            "mode": "VCO MODE",
            "function": "hard sync",
            "feeds": [
              "LFO"
            ],
            "direction": null
          }
        ],
        "types": [
          "reset_in",
          "sync_in",
          "trigger_in"
        ],
        "not_stated": [
          "voltage_min",
          "voltage_max",
          "threshold_v",
          "impedance_ohms"
        ],
        "name_basis": "printed",
        "label_in_source": true
      },
      {
        "src": 383,
        "name": "Square",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "square wave, unipolar",
        "voltage_min": 0,
        "voltage_max": 8,
        "polarity": "unipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": true
      },
      {
        "src": 383,
        "name": "Triangle bipolar",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "triangle wave, bipolar",
        "voltage_min": -5,
        "voltage_max": 5,
        "polarity": "bipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": false
      },
      {
        "src": 383,
        "name": "Triangle unipolar",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "triangle wave, unipolar",
        "voltage_min": 0,
        "voltage_max": 5,
        "polarity": "unipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": false
      },
      {
        "src": 383,
        "name": "Saw bipolar",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "saw wave, bipolar",
        "voltage_min": -5,
        "voltage_max": 5,
        "polarity": "bipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": false
      },
      {
        "src": 383,
        "name": "Saw unipolar",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "saw wave, unipolar",
        "voltage_min": 0,
        "voltage_max": 5,
        "polarity": "unipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": false
      },
      {
        "src": 383,
        "name": "Sine bipolar",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "sine wave, bipolar",
        "voltage_min": -5,
        "voltage_max": 5,
        "polarity": "bipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": false
      },
      {
        "src": 383,
        "name": "Sine unipolar",
        "direction": "output",
        "signal_types": [
          "cv",
          "audio"
        ],
        "function": "sine wave, unipolar",
        "voltage_min": 0,
        "voltage_max": 5,
        "polarity": "unipolar",
        "scaling": null,
        "threshold_v": null,
        "pulse_ms": null,
        "coupling": null,
        "audio_rate": null,
        "impedance_ohms": null,
        "normalled_from": null,
        "attenuated_by": null,
        "feeds": [],
        "sourced_from": [
          "LFO"
        ],
        "selected_by": [],
        "per_mode": [],
        "types": [
          "lfo_out",
          "osc_waveform_out"
        ],
        "not_stated": [
          "impedance_ohms"
        ],
        "name_basis": "described",
        "label_in_source": false
      }
    ],
    "controls": [
      {
        "src": 383,
        "name": "FREQ",
        "control_type": "knob",
        "function": "LFO frequency",
        "range_min": 0.01,
        "range_max": 30,
        "range_unit": "Hz",
        "bipolar": null,
        "affects": [
          "LFO"
        ],
        "positions": [],
        "per_mode": [],
        "name_basis": "printed",
        "label_in_source": true
      },
      {
        "src": 383,
        "name": "VCO MODE",
        "control_type": "other",
        "function": "audio range toggle",
        "range_min": null,
        "range_max": null,
        "range_unit": null,
        "bipolar": null,
        "affects": [
          "LFO"
        ],
        "positions": [
          {
            "label": "off",
            "effect": "LFO range"
          },
          {
            "label": "on",
            "effect": "audio range, V/Oct"
          }
        ],
        "per_mode": [],
        "name_basis": "printed",
        "label_in_source": true
      },
      {
        "src": 383,
        "name": "V/OCT TRIM",
        "control_type": "other",
        "function": "VCO tracking trim",
        "range_min": null,
        "range_max": null,
        "range_unit": null,
        "bipolar": null,
        "affects": [
          "LFO"
        ],
        "positions": [],
        "per_mode": [],
        "name_basis": "printed",
        "label_in_source": true
      }
    ],
    "modes": [
      {
        "src": 383,
        "name": "LFO",
        "selected_by": {
          "control": "VCO MODE",
          "position": "off"
        },
        "selection_method": "VCO MODE off",
        "kind": "frequency range"
      },
      {
        "src": 383,
        "name": "VCO MODE",
        "selected_by": {
          "control": "VCO MODE",
          "position": "on"
        },
        "selection_method": "VCO MODE engaged, LED lit",
        "kind": "frequency range"
      }
    ],
    "hidden_functions": [],
    "specs": [
      {
        "src": 383,
        "subject": "LFO",
        "quantity": "frequency range",
        "min": 0.01,
        "max": 30,
        "value": null,
        "unit": "Hz",
        "condition": "LFO mode"
      },
      {
        "src": 383,
        "subject": "LFO",
        "quantity": "cycle time range",
        "min": 0.03,
        "max": 90,
        "value": null,
        "unit": "s",
        "condition": "LFO mode"
      },
      {
        "src": 383,
        "subject": "VCO MODE",
        "quantity": "V/Oct tracking range",
        "min": null,
        "max": null,
        "value": 5,
        "unit": "octaves",
        "condition": "approx, VCO mode"
      },
      {
        "src": 383,
        "subject": "module",
        "quantity": "current draw +12V",
        "min": null,
        "max": null,
        "value": 40,
        "unit": "mA",
        "condition": null
      },
      {
        "src": 383,
        "subject": "module",
        "quantity": "current draw -12V",
        "min": null,
        "max": null,
        "value": 20,
        "unit": "mA",
        "condition": null
      },
      {
        "src": 383,
        "subject": "module",
        "quantity": "width",
        "min": null,
        "max": null,
        "value": 4,
        "unit": "HP",
        "condition": null
      },
      {
        "src": 383,
        "subject": "module",
        "quantity": "depth",
        "min": null,
        "max": null,
        "value": 32,
        "unit": "mm",
        "condition": "approx"
      }
    ],
    "properties": [
      {
        "src": 383,
        "subject": "LFO",
        "property": "circuit",
        "value": "all analogue"
      },
      {
        "src": 383,
        "subject": "Square output",
        "property": "polarity",
        "value": "unipolar only"
      },
      {
        "src": 383,
        "subject": "Triangle/Saw/Sine",
        "property": "bipolar and unipolar",
        "value": "simultaneous"
      },
      {
        "src": 383,
        "subject": "VCO MODE",
        "property": "indicator",
        "value": "LED"
      },
      {
        "src": 383,
        "subject": "module",
        "property": "calibration",
        "value": "shipped precalibrated"
      },
      {
        "src": 383,
        "subject": "module",
        "property": "reverse power protection",
        "value": "yes"
      }
    ],
    "rules": [
      {
        "src": 383,
        "subject": "Rst",
        "when": "trigger received",
        "effect": "resets all waveform cycles",
        "mode": null
      },
      {
        "src": 383,
        "subject": "Rst",
        "when": "in VCO mode",
        "effect": "acts as hard sync",
        "mode": "VCO MODE"
      },
      {
        "src": 383,
        "subject": "VCO MODE",
        "when": "engaged",
        "effect": "jumps to audio range",
        "mode": null
      },
      {
        "src": 383,
        "subject": "VCO MODE",
        "when": "high frequencies",
        "effect": "reaches ultrasonic",
        "mode": null
      },
      {
        "src": 383,
        "subject": "V/OCT TRIM",
        "when": "calibrating with 1V, 3V",
        "effect": "match notes two octaves apart",
        "mode": "VCO MODE"
      }
    ],
    "tags": [
      {
        "tag": "lfo",
        "basis": "block",
        "evidence": "block LFO: analogue low frequency oscillator",
        "scope": "patchable",
        "src": 383
      },
      {
        "tag": "analog_vco",
        "basis": "mode",
        "evidence": "mode VCO MODE: audio range, tracks V/Oct",
        "scope": "patchable",
        "src": 383
      },
      {
        "tag": "one_v_per_octave",
        "basis": "mode",
        "evidence": "VCO MODE: FREQ tracks 1V/oct ~5 octaves",
        "scope": "patchable",
        "src": 383
      },
      {
        "tag": "simultaneous_waveform_outputs",
        "basis": "jack",
        "evidence": "separate square, triangle, saw, sine outs",
        "scope": "patchable",
        "src": 383
      },
      {
        "tag": "hard_sync",
        "basis": "jack",
        "evidence": "jack Rst: hard sync in VCO mode",
        "scope": "patchable",
        "src": 383
      },
      {
        "tag": "polarity_switch",
        "basis": "jack",
        "evidence": "Triangle/Saw/Sine each on bipolar and unipolar outputs",
        "scope": "patchable",
        "src": 383
      }
    ]
  },
  "sources": [
    {
      "id": 383,
      "source_type": "manual",
      "format": "pdf",
      "title": "ALM048 'Pip LFO' Operation Manual",
      "canonical_url": "https://assets.busycircuits.com/docs/alm048-manual.pdf",
      "url": "https://eurorackref.com/alm-busy-circuits/pip-lfo/#src-383",
      "last_verified": "2026-05-15",
      "canonical_changed_at": null,
      "primary": true
    },
    {
      "id": 384,
      "source_type": "product_page",
      "format": "html",
      "title": "ALM Busy Circuits Pip LFO product page",
      "canonical_url": "https://busycircuits.com/products/alm048",
      "url": "https://eurorackref.com/alm-busy-circuits/pip-lfo/#src-384",
      "last_verified": "2026-05-15",
      "canonical_changed_at": "2026-09-26T09:01:51.969Z",
      "changed_since_verified": true
    }
  ],
  "firmware_versions": [],
  "_meta": {
    "last_verified": "2026-05-15",
    "record_meta": {
      "schema_version": 4,
      "extracted_at": "2026-11-16T13:06:05Z"
    }
  }
}