# Pamela's NEW Workout (ALM Busy Circuits)

Canonical page: https://eurorackref.com/alm-busy-circuits/pamelas-new-workout/

- id: `alm-busy-circuits/pamelas-new-workout`
- width: 8 HP; depth: 22 mm
- power: +12 V 50 mA, −12 V 0.5 mA, +5 V ? mA
- status: current
- functions: Master Clock, Tempo / Clock Sync, Clock Divider / Multiplier, LFO, Random / Sample & Hold CV, Euclidean rhythm, Probability / Bernoulli Gate, Quantizer, Logic Gates, Trigger / Euclidean Sequencer

## Inputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Clk | clock | external clock input | not stated | unknown | — | 1073 |
| Run | gate, trigger | run or reset | not stated | unknown | — | 1073 |
| CV 1 | cv | assignable CV | 0 to 5 V | unipolar | — | 1073 |
| CV 2 | cv | assignable CV | -5 to 5 V | bipolar | — | 1073 |

## Outputs

| Jack | Signals | Function | Voltage | Polarity | Normalled from / comes from | Source |
|---|---|---|---|---|---|---|
| Out 1 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 1, BPM master clock | 1073 |
| Out 2 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 2, BPM master clock | 1073 |
| Out 3 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 3, BPM master clock | 1073 |
| Out 4 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 4, BPM master clock | 1073 |
| Out 5 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 5, BPM master clock | 1073 |
| Out 6 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 6, BPM master clock | 1073 |
| Out 7 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 7, BPM master clock | 1073 |
| Out 8 | clock, gate, trigger, cv | clocked voltage output | 0 to 5 V | unipolar | Output 8, BPM master clock | 1073 |

## Controls

| Control | Type | Function | Range | Affects | Source |
|---|---|---|---|---|---|
| Program Knob | knob | encoder: select / edit | — | BPM master clock, Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Start/Stop | button | start / stop clock | — | BPM master clock | 1073 |
| BPM | menu_setting | clock tempo | 10 to 300 BPM | BPM master clock | 1073 |
| PPQN | menu_setting | external clock PPQN | 1 to 48 PPQN | Clk | 1073 |
| Run? | menu_setting | Run input starts clock | — | Run | 1073 |
| Run action | menu_setting | Run input action | — | Run | 1073 |
| Modifier | menu_setting | clock multiply / divide | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Wave | menu_setting | output waveform | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Level | menu_setting | output level | 0 to 100 % | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Offset | menu_setting | vertical offset | 0 to 100 % | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Width | menu_setting | width / skew | 0 to 100 % | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Phase | menu_setting | waveform start point | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Delay | menu_setting | step delay | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Dly | menu_setting | delay divisor | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Slop | menu_setting | timing error likelihood | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| EStep | menu_setting | Euclidean step count | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Euclidean triggers | menu_setting | Euclidean hit count | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| ERot | menu_setting | Euclidean rotation | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| RSkip | menu_setting | random step skip | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Loop | menu_setting | beat based loop | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Quant | menu_setting | scale quantisation | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Logic | menu_setting | combine with channel | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Mute | menu_setting | mute output | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Save | menu_setting | save to bank | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Load | menu_setting | load from bank | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| Reset | menu_setting | reset output parameters | — | Output 1, Output 2, Output 3, Output 4, Output 5, Output 6, Output 7, Output 8 | 1073 |
| CV Atten | menu_setting | per-parameter CV attenuation | — | CV 1, CV 2 | 1073 |
| CV Offset | menu_setting | per-parameter CV offset | — | CV 1, CV 2 | 1073 |

## Modes

- Run: Run (Run action = Run) [1073]
- Run: Reset (Run action = RS) [1073]
- Run: Load Sequenced Bank (Run action = LD) [1073]
- Run: Rotate Outputs (Run action = RA) [1073]
- Run: Rotate top row (Run action = RR) [1073]
- Run: Load CV Bank (Run action = LC) [1073]
- external clock sync (PPQN = 1-48) [1073]
- CV tempo (PPQN = CV) [1073]
- extended parameters [1073]
- service mode [1073]

## Specs

| Subject | Quantity | Value | Condition | Source |
|---|---|---|---|---|
| BPM master clock | tempo range | 10 to 300 BPM | — | 1073 |
| Modifier | max division | 512 divisor | — | 1073 |
| Modifier | max multiplication | 48 multiplier | — | 1073 |
| Pexp-1 | gate outputs | 4 count | — | 1073 |
| Clk | external clock resolution | 1 to 48 PPQN | — | 1073 |
| Clk | default PPQN | 24 PPQN | — | 1073 |
| outputs | resolution | 10 bits | — | 1073 |
| outputs | max update frequency | 500 Hz | — | 1073 |
| outputs | count | 8 count | — | 1073 |
| Level | range | 0 to 100 % | — | 1073 |
| Offset | range | 0 to 100 % | — | 1073 |
| Quant | range | 5 octaves | — | 1073 |
| Quant | resolution | 10 bits | — | 1073 |
| banks | save banks | 26 count | a-z, 8 slots each | 1073 |
| banks | save banks | 200 count | — | 1074 |
| Load CV Bank | addressable banks | 16 count | — | 1073 |
| Run action | CV 1 high threshold | 2 V | — | 1073 |
| extended parameters | hold time | 1 s | — | 1073 |
| service mode | clock calibration default | 50 value | — | 1073 |
| service mode | clock calibration range | 0 to 100 value | — | 1075 |
| module | +12V current | 50 mA | — | 1073 |
| module | -12V current | 0.5 mA | — | 1073 |
| module | -12V current | 5 mA | — | 1074 |
| module | width | 8 HP | — | 1073 |
| module | depth | 22 mm | — | 1073 |
| module | depth | 32 mm | — | 1074 |
| Pexp-1 | width | 4 HP | — | 1073 |
| Pexp-1 | +12V current increase | 25 mA | — | 1073 |
| Pexp-2 | width | 2 HP | — | 1073 |
| Pexp-2 | clock output | 24 PPQN | — | 1073 |
| OLED | screensaver timeout | 15 min | firmware 198+ | 1075 |

## Behavior

- extended parameters: when utility modifier selected → not available [1073]
- Offset: when output exceeds 5V → clipped at 5V [1073]
- Delay: when Dly divisor unset → no effect [1073]
- Delay: when set → end of cycle clipped [1073]
- Dly: when divisor 2 → swing effect [1073]
- Euclidean triggers: when set → must be below steps [1073]
- Loop: when set to zero → re-seeds random generator [1073]
- Quant random: when empty pattern steps → held, not 0V [1073]
- Width: when Random waveform → no effect [1073]
- Width: when Triangle at 100% → saw [1073]
- Logic AND: when other channel high → fast clock passes [1073]
- Mute: when output muted → still editable [1073]
- Save: when clock running → timing errors possible [1073]
- CV inputs: when outside range → ignored, safe [1073]
- CV 1: when negative voltage → not responded to [1073]
- Run: when default → external run/stop [1073]
- Run: when non-run action set → clock state auto-detected [1073]
- Run actions: when trigger, clock running → action performed [1073]
- Load Sequenced Bank: when CV 1 low → next bank [1073]
- Load Sequenced Bank: when CV 1 high (>2V) → previous bank [1073]
- Rotate Outputs: when CV 1 low → anti-clockwise [1073]
- Rotate Outputs: when CV 1 high → clockwise [1073]
- Run?: when Y → Run input starts clock [1073]
- Run?: when N → auto start on clock [1073]
- external sync: when BPM shows 10 → PPQN likely too high [1073]
- external clock: when tempo unstable → warning displayed [1073]
- PPQN: when set to CV → CV 1 controls tempo [1073]
- power-up: when default → display shows BPM [1073]
- service mode: when Start pressed → exits, normal start [1073]
- clock calibration: when rev 063 or later → fixed at 0 [1073]
- firmware update: when performed → saved outputs likely cleared [1073]
- firmware update: when in progress → display blank [1073]
- Modifier: when start pulse type → fires once at start [1073]
- Modifier: when stop pulse type → fires once at stop [1073]
- Reset: when full reset → mute states reset [1075]
- OLED: when no interaction → screensaver dims display [1075]

## Sources

- [1073] ALM-017 'Pamela's NEW Workout' Operation Manual v0.7 (firmware 206) (manual): https://assets.busycircuits.com/docs/alm017-manual.pdf
- [1074] ALM Pamela's NEW Workout product page (product_page): https://busycircuits.com/pages/alm017
- [1075] ALM-017 Firmware History (ChangeLog.txt) (firmware_notes): https://assets.busycircuits.com/firmware/alm017/ChangeLog.txt

Full record as JSON: https://eurorackref.com/alm-busy-circuits/pamelas-new-workout.json
